README web version of /home/usg/OPS/MTS/readme_xml/readme_75030600

Principal Investigator Email Address

```
cledoux@eso.org
```

Estimated Total Execution Time (hours, including overheads)

```
02:01:27.000
```

General Description

Simple deep imaging observations of one QSO field.

Some of the images are to be taken with the B and/or the R filters. The other images
 are to be taken with the narrow-band filter FILT_406_5+110. Please check that this
 narrow-band filter name is properly set in the OB before starting the OB execution.
 The reason for this is that I had to manually edit the .obx files at phase II because
 this filter name is not in the list of filters known by P2PP, although this is an
 ESO filter.

The execution time has been split into 2h01min and 2h59min for runs A (PHO) and
 B (CLR) respectively (instead of 2h30min for each of them). This should not be a
 problem though, since less observing time than granted is requested under photometric
 conditions.

Waiver Requests

```
No Waiver Request was submitted
```

Critical Observing Condition Constraints

```
none
```

Time-Critical Aspects

```
none
```

Special Execution Requirements

---(Empty)---

Special Calibration Information

Standard calibrations only. As usual, we need a spectrophotometric standard
 star to be observed using the narrow-band filter (i.e., FILT_406_5+110).

ToO Information

---(Empty)---

ToO Activators List

---(Empty)---

Is this a Pre-imaging run ?

```
false
```

Pre-imaging Requirements

---(Empty)---

Source(s) of Pre-imaging

---(Empty)---

Pre-imaging sources not listed above

---(Empty)---

Do all your OBs comply with the instrument-specific requirements listed on the instrument-specific Phase 2 web page ?

If this is a pre-imaging run, did you select PRE-IMAGING for the Observing Category for each Observing Template ?

```
N/A
```

Do all your finding charts comply with both the general and instrument-specific Phase 2 Web Pages ?

If you submitted OBs for standard stars, did you specify the magnitude and spectral type of all standard stars in the OBs ?

```
N/A
```

Have you included OBs for any calibrations that you need but which are not part of the Calibration Plan ?

```
N/A
```

If you are observing Moving Targets, have you attached suitable ephemeris files to your OBs?

```
N/A
```

If you have preferences which OBs should be executed first, did you make use of the User Priority field in the OBs ?

```
N/A
```

If this is a run that requires coordinated observations with other facilities, did you give proper instructions in the Time-Critical Aspects Section ?

```
N/A
```

If you have prepared your finding charts with tools other than FIMS, do they comply with the specifications on the FORS1 Phase 2 web page ?

```
N/A
```

Last creation of page: Tue Oct 6 15:40:07 2009
If you have comments, please contact usd-help@eso.org