README web version of /home/usg/OPS/MTS/readme_xml/readme_73080101

Principal Investigator Email Address

```
mzoccali@astro.puc.cl
```

Estimated Total Execution Time (hours, including overheads)

```
10:20
```

General Description

This is a programme to collect very deep J, H images of a region in the
 
Galactic Bulge, with the aim of getting the Bulge Initial Mass Function 
down to the bottom of the Main Sequence (part B). Part A of the programme, 
was a test run lasting 1 hour to verify that the appropriate reference 
star and wavefront sensor have been selected for the adaptive optics system.

The AO NGS is the pre-imaging target, to verify that the field is
properly oriented and located. Please make sure that the field you 
see is just the one we indicated. 

OB Information
==============

In columns 2 and 3 we observe the NGS PSF, in H and J, respectively. 
It will be used during the data reduction. Please make sure that 
indeed it is the NGS which is observed.

Waiver Requests

```
No Waiver Request was submitted
```

Critical Observing Condition Constraints

```
none
```

Time-Critical Aspects

```
none
```

Special Execution Requirements

---(Empty)---

Special Calibration Information

---(Empty)---

ToO Information

---(Empty)---

ToO Activators List

---(Empty)---

Is this a Pre-imaging run ?

```
false
```

Pre-imaging Requirements

---(Empty)---

Source(s) of Pre-imaging

---(Empty)---

Pre-imaging sources not listed above

---(Empty)---

Do all your OBs comply with the instrument-specific requirements listed on the instrument-specific Phase 2 web page ?

If this is a pre-imaging run, did you select PRE-IMAGING for the Observing Category for each Observing Template ?

```
N/A
```

Do all your finding charts comply with both the general and instrument-specific Phase 2 Web Pages ?

If you submitted OBs for standard stars, did you specify the magnitude and spectral type of all standard stars in the OBs ?

```
N/A
```

Have you included OBs for any calibrations that you need but which are not part of the Calibration Plan ?

```
N/A
```

If you are observing Moving Targets, have you attached suitable ephemeris files to your OBs?

```
N/A
```

If you have preferences which OBs should be executed first, did you make use of the User Priority field in the OBs ?

```
N/A
```

If this is a run that requires coordinated observations with other facilities, did you give proper instructions in the Time-Critical Aspects Section ?

```
N/A
```

If you have PSF reference star OBs, do the names of those OBs begin with PSF_ ?

```
N/A
```

If there are Finding Charts attached to your OBs, is the field-of-view of at least one of these charts 2' x 2' (with clearly labelled field orientation) ?

Have you clearly marked and labelled your wavefront reference objects R1, R2, R3, ... (as specified in the NAOS Preparation Software) on your Finding Charts ?

Have you specified the magnitude of the brightest object in the field-of-view for each OB ?

```
N/A
```

Are there objects in any of your fields (including standard stars) which are brighter than the limits specified in the User Manual and on NACO web Pages ?

If the previous answer is yes, have you given a list of OBs and a justification for the brightness limit violation in the general description field ?

```
N/A
```

Last creation of page: Tue Oct 6 15:40:06 2009
If you have comments, please contact usd-help@eso.org