README Template 71.1 (please do not delete the README Template Version line!) ESO Programme ID: 71.D-0441A Principal Investigator Name: R. D. JEFFRIES Principal Investigator E-mail Address: rdj@astro.keele.ac.uk Principal Investigator Telephone Number: 44-1782 583892 Principal Investigator Postal Address: Dept. of Physics, Keele University Keele, Staffordshire, ST5 5BG Instrument: UVES OPC Priority Class: B OPC Approved Total Execution Time: 16.0 Estimated Total Execution Time (including overheads): 15.9 README File Submission Date: 3rd March 2003 Programme Description ===================== General Overview ---------------- The program is primarily to do high resolution spectroscopy of the Beryllium feature at 313.1 nm in a set of 10 stars in the young open cluster NGC 6633. As a bonus, we will also obtain very high S/N spectroscopy of the targets in the red arm for multi-element abundance analyses. Our priority is to ensure maximum efficiency in the blue. We use the UVES_DIC1 with the 346+580 setup and a 1.2 arcsec slit. De-rotator should be in ELEV mode. The detectors should be set at 2x2 binning in the blue arm and 1x1 in the red arm. Acquisition is done in the blue. We have 10 targets in total. We would like to observe each of them TWICE with identical OBs. This should ensure we achieve a S/N of >30 per spectral pixel (binned by 2) at 313.1 nm. Total exposure times vary from 50 mins to 1 hr 40 mins. Each OB consists of two target exposures. OUR PREFERENCE IS TO COMPLETE THE OBSERVATIONS OF ONE OF OUR TARGETS BEFORE MOVING ONTO ANOTHER (i.e. complete both OBs on each target before starting a fresh target). All other conditions being equal we have a clear priority order for our targets (which are all subject to the same observing condition constraints). The No.1 priority is N6633-J37. No.2 priority are N6633-J1 and N6633-J2 Other targets are a lower priority than these. Approved Waiver Request Summary ------------------------------- None Critical Observing Condition Constraints ---------------------------------------- Seeing - 1.2 arcsec. Airmass - 1.6. Sky - THN Moon - 1.0, Angular distance >30 degrees. Time Critical Aspects --------------------- None Special Calibration Information ------------------------------- None ToO Information --------------- None Pre-Imaging Requirements ------------------------ None OB Information ============== List of Science OBs with Associated Finding Charts -------------------------------------------------- Total Number of Submitted Science OBs: 20 Total Number of Submitted Finding Charts: 10 N6633-J37_1 = 71.D-0441A.001.ps N6633-J37_2 = 71.D-0441A.001.ps N6633-J1_1 = 71.D-0441A.002.ps N6633-J1_2 = 71.D-0441A.002.ps N6633-J2_1 = 71.D-0441A.003.ps N6633-J2_2 = 71.D-0441A.003.ps N6633-J3_1 = 71.D-0441A.004.ps N6633-J3_2 = 71.D-0441A.004.ps N6633-J16_1 = 71.D-0441A.005.ps N6633-J16_2 = 71.D-0441A.005.ps N6633-J25_1 = 71.D-0441A.006.ps N6633-J25_2 = 71.D-0441A.006.ps N6633-J34_1 = 71.D-0441A.007.ps N6633-J34_2 = 71.D-0441A.007.ps N6633-J56_1 = 71.D-0441A.008.ps N6633-J56_2 = 71.D-0441A.008.ps N6633-J65_1 = 71.D-0441A.009.ps N6633-J65_2 = 71.D-0441A.009.ps N6633-J74_1 = 71.D-0441A.010.ps N6633-J74_2 = 71.D-0441A.010.ps List of Calibration OBs with Associated Science OBs --------------------------------------------------- Total Number of Submitted Calibration OBs: OB Compliance Checks ==================== (Y = Yes, N = No, NA = Not Applicable) Do all your OBs comply with the instrument specific requirements listed on the instrument specific Phase 2 Web pages ? [Y] If you submitted OBs for standard stars, did you specify the magnitude and spectral type of all standard stars ? [NA] Have you included OBs for any calibrations that you need but which are not a part of the Calibration Plan? [NA] [FORS only] Do all your FORS OBs use only the allowed detector read-out modes listed on the FORS1/FORS2 Phase 2 Web pages? [NA] [FORS only] Do all your FORS MOS/LSS OBs contain the mandatory "through-slit image" template? [NA] [UVES only] Do all your UVES OBs use only the allowed templates listed on the UVES Phase 2 Web pages ? [Y] [ISAAC only] Are ALL the objects in your field-of-view fainter than the magnitude limits specified on the ISAAC Phase 2 Web page ? [NA] [ISAAC only] If you submitted OBs for standard stars, did you use the provided StandardStar templates? [NA] [FLAMES only] Did you specify the hour angle range for which your Target Setup files are valid ? [NA] [WFI only]Are your finding charts 34 arcmin x 34 arcmin? [NA] If you answered "NO" to any of these questions, please revise your OBs *before* submission.