README Template 71.1 (please do not delete the README Template Version line!) ESO Programme ID: Principal Investigator Name: Michael Odenkirchen Principal Investigator E-mail Address: odenkirchen@mpia.de Principal Investigator Telephone Number: +49-6221-528263 Principal Investigator Postal Address: Max-Planck-Institu fuer Astromomie / Koenigstuhl 17 / D-69117 Heidelberg / Germany Instrument: FLAMES OPC Priority Class: B OPC Approved Total Execution Time: 12.9 Estimated Total Execution Time (including overheads): 12.9 README File Submission Date: 28 February 2003 Programme Description ===================== General Overview ---------------- This is a program for high-resolution spectroscopy in 11 fields using UVES and GIRAFFE simultaneously. The aim of the project is to derive precise radial velocities of the targets. Approved Waiver Request Summary ------------------------------- We have requested that we can extend the total execution time of each OB from 1h to 1h17min at most. This request was submitted on 24 February 2003 (waiver ID 71.D-0181A.01.WAV) and approved on 27 February 2003 (message by F.Primas). Note also, that the location of the 11 fields is not exactly as given in the proposal. Fine tuning was necessary during Phase 2. The new positions of field centers have been approved in a message by F.Comeron on 19 February 2003. Critical Observing Condition Constraints ---------------------------------------- None Time Critical Aspects --------------------- None Special Calibration Information ------------------------------- For precise wavelength calibration of the UVES spectra we have chosen the 7+1 mode, i.e. 1 fibre is used to record a simultaneous lamp spectrum. The calibration process should of course take this into account. ToO Information --------------- Not a ToO program Pre-Imaging Requirements ------------------------ No pre-imaging required OB Information ============== List of Science OBs with Associated Finding Charts -------------------------------------------------- Total Number of Submitted Science OBs: 11 Total Number of Submitted Finding Charts: 11 Pal5_01 = 71.D-0181A.001.ps Pal5_02 = 71.D-0181A.002.ps Pal5_03 = 71.D-0181A.003.ps Pal5_04 = 71.D-0181A.004.ps Pal5_05 = 71.D-0181A.005.ps Pal5_06 = 71.D-0181A.006.ps Pal5_07 = 71.D-0181A.007.ps Pal5_08 = 71.D-0181A.008.ps Pal5_09 = 71.D-0181A.009.ps Pal5_10 = 71.D-0181A.010.ps Pal5_11 = 71.D-0181A.011.ps Special information for Flames ------------------------------ Field HA R-mag of R-mag of Reference stars range Guide star 01 +/-4h 13.2 14.2, 14.7, 14.4, 13.8 02 +/-4h 13.0 14.8, 14.2, 14.8, 14.0 03 +/-4h 13.4 14.8, 14.3, 14.0, 14.6 04 +/-4h 13.1 14.7, 14.6, 14.6, 14.2 05 +/-4h 13.1 13.5, 14.0, 14.2, 14.2 06 +/-4h 13.5 13.9, 14.8, 14.2, 14.4 07 +/-4h 13.3 13.9, 14.4, 14.5, 15.0 08 +/-4h 12.9 14.0, 14.8, 13.9, 14.4 09 +/-4h 13.4 14.5, 13.9, 14.3, 13.6 10 +/-4h 13.2 13.9, 14.8, 14.1, 14.1 11 +/-4h 13.5 14.3, 14.1, 14.1, 14.2 List of Calibration OBs with Associated Science OBs --------------------------------------------------- Total Number of Submitted Calibration OBs: 0 OB Compliance Checks ==================== (Y = Yes, N = No, NA = Not Applicable) Do all your OBs comply with the instrument specific requirements listed on the instrument specific Phase 2 Web pages ? [Y] If you submitted OBs for standard stars, did you specify the magnitude and spectral type of all standard stars ? [NA] Have you included OBs for any calibrations that you need but which are not a part of the Calibration Plan? [NA] [FORS only] Do all your FORS OBs use only the allowed detector read-out modes listed on the FORS1/FORS2 Phase 2 Web pages? [NA] [FORS only] Do all your FORS MOS/LSS OBs contain the mandatory "through-slit image" template? [NA] [UVES only] Do all your UVES OBs use only the allowed templates listed on the UVES Phase 2 Web pages ? [Y] [ISAAC only] Are ALL the objects in your field-of-view fainter than the magnitude limits specified on the ISAAC Phase 2 Web page ? [NA] [ISAAC only] If you submitted OBs for standard stars, did you use the provided StandardStar templates? [NA] [FLAMES only] Did you specify the hour angle range for which your Target Setup files are valid ? [Y] [WFI only]Are your finding charts 34 arcmin x 34 arcmin? [NA] If you answered "NO" to any of these questions, please revise your OBs *before* submission.