README Template 71.1 (please do not delete the README Template Version line!) ESO Programme ID: 071.D.-0153.txt Principal Investigator Name: Claudio Melo Principal Investigator E-mail Address: cmelo@eso.org Principal Investigator Telephone Number: +56 2 463 30 79 Principal Investigator Postal Address: European Southern Observatory / Av. Alonso de Cordoba, 3107 / Santiago / Chile Instrument: FLAMES OPC Priority Class: C OPC Approved Total Execution Time: 11h30m Estimated Total Execution Time (including overheads): 11h37m README File Submission Date: 24 February 2003 Programme Description ===================== General Overview ---------------- This is a simple spectroscopic program using the UVES/FLAMES set-up's, 580 nm and 860 nm Approved Waiver Request Summary ------------------------------- None. Critical Observing Condition Constraints ---------------------------------------- There two group of stars: A & B. Group A has two pointings: Group_A_p1_ and Group_A_p2_ whereas group B has only one: Group_B_p1_. For a given group of 2 OB (e.g.: Group_A_p1_580 and Group_A_p1_860), be sure to start with the 580 nm set-up. Also, if a 580nm setup is executed, make sure to execute the 860nm correspoding OB, if possible. In short, the order of execution would be the following: Group_A_p1_580 Group_A_p1_860 Group_A_p2_580 Group_A_p2_860 Group_B_p1_580-1 Group_B_p1_580-2 Group_B_p1_860-1 Group_B_p1_860-2 ** All OBs must be executed within an hour angle -1.3 < HA < 1.3 ** Time Critical Aspects --------------------- None. Special Calibration Information ------------------------------- None. ToO Information --------------- This is not a ToO programme. Pre-Imaging Requirements ------------------------ No pre-imaging is required for this programme. OB Information ============== List of Science OBs with Associated Finding Charts -------------------------------------------------- Total Number of Submitted Science OBs: 8 Total Number of Submitted Finding Charts: 3 Group_A_p1_580 = 071.D-0153.001.ps Group_A_p1_860 = 071.D-0153.001.ps Group_A_p2_860 = 071.D-0153.002.ps Group_A_p2_580 = 071.D-0153.002.ps Group_B_p1_580-1 = 071.D-0153.003.ps Group_B_p1_580-2 = 071.D-0153.003.ps Group_B_p1_860-1 = 071.D-0153.003.ps Group_B_p1_860-2 = 071.D-0153.003.ps List of Calibration OBs with Associated Science OBs --------------------------------------------------- Total Number of Submitted Calibration OBs: 0 OB Compliance Checks ==================== (Y = Yes, N = No, NA = Not Applicable) Do all your OBs comply with the instrument specific requirements listed on the instrument specific Phase 2 Web pages ? [Y] If you submitted OBs for standard stars, did you specify the magnitude and spectral type of all standard stars ? [NA] Have you included OBs for any calibrations that you need but which are not a part of the Calibration Plan? [NA] [FORS only] Do all your FORS OBs use only the allowed detector read-out modes listed on the FORS1/FORS2 Phase 2 Web pages? [NA] [FORS only] Do all your FORS MOS/LSS OBs contain the mandatory "through-slit image" template? [NA] [UVES only] Do all your UVES OBs use only the allowed templates listed on the UVES Phase 2 Web pages ? [NA] [ISAAC only] Are ALL the objects in your field-of-view fainter than the magnitude limits specified on the ISAAC Phase 2 Web page ? [NA] [ISAAC only] If you submitted OBs for standard stars, did you use the provided StandardStar templates? [NA] [FLAMES only] Did you specify the hour angle range for which your Target Setup files are valid ? [Y] [WFI only]Are your finding charts 34 arcmin x 34 arcmin? [NA] If you answered "NO" to any of these questions, please revise your OBs *before* submission.