README Template 71.1 (please do not delete the README Template Version line!) ESO Programme ID:71.B-0621(B) Principal Investigator Name: Gisella Clementini Principal Investigator E-mail Address: gisella@bo.astro.it Principal Investigator Telephone Number: +39-051-2095758 Principal Investigator Postal Address: INAF Osservatorio Astronomico Via Ranzani 1 40127 Bologna Italy Instrument: FORS2 OPC Priority Class: B OPC Approved Total Execution Time: 2 Estimated Total Execution Time (including overheads): 1.88 README File Submission Date: 5 March 2003 Programme Description ===================== General Overview ---------------- ---------------- This is a simple imaging program consisting of 14 independent sequences. The purpose of the program is to obtain pre-imaging to get astrometry good enough for all the spectroscopic pointings of the ESO Programme ID: 71.B-0621(A) which has been assigned 8 hours UT4+FORS2 in service mode. This goal is achieved by imaging 9 fields of Sculptor dwarf spheroidal galaxy (the main targets of programme 71.B-0621(A)), and 5 fields in 4 globular clusters used for calibration purposes. All imaging is to be taken in the B filter, since this is the photometric passband that better matches the wavelenght region of interest of the spectroscopic run. The program consists of 9 OBs of 8.8 minutes on the Sculptor fields and 5 OBs of 6.9 minutes on the calibrating cluster for a total exposure time of 1.53 hours (as derived from the OB execution time report). Approved Waiver Request Summary ------------------------------- Critical Observing Condition Constraints ---------------------------------------- The program does not need to be conducted in photometric conditions. Seeing<=1 arcsec is required. Gray time is adequate. Time Critical Aspects --------------------- None Special Calibration Information ------------------------------- No calibration is needed ToO Information --------------- This is not a ToO programme Pre-Imaging Requirements ------------------------ This is the pre-imaging part of our program OB Information ============== List of Science OBs with Associated Finding Charts -------------------------------------------------- Total Number of Submitted Science OBs: 14 Total Number of Submitted Finding Charts: 14 Sculptor_1 = 71.B-0621B.001 Sculptor_2 = 71.B-0621B.002 Sculptor_4 = 71.B-0621B.004 Sculptor_3 = 71.B-0621B.003 Sculptor_5 = 71.B-0621B.005 Sculptor_6 = 71.B-0621B.006 Sculptor_7 = 71.B-0621B.007 Sculptor_8 = 71.B-0621B.008 Sculptor_9 = 71.B-0621B.009 N6441_1 = 71.B-0621B.010 N6441_2 = 71.B-0621B.011 N6171 = 71.B-0621B.012 M15 = 71.B-0621B.013 M2 = 71.B-0621B.014 List of Calibration OBs with Associated Science OBs --------------------------------------------------- Total Number of Submitted Calibration OBs: 0 OB Compliance Checks ==================== (Y = Yes, N = No, NA = Not Applicable) Do all your OBs comply with the instrument specific requirements listed on the instrument specific Phase 2 Web pages ? [Y] If you submitted OBs for standard stars, did you specify the magnitude and spectral type of all standard stars ? [NA] Have you included OBs for any calibrations that you need but which are not a part of the Calibration Plan? [NA] [FORS only] Do all your FORS OBs use only the allowed detector read-out modes listed on the FORS1/FORS2 Phase 2 Web pages? [Y] [FORS only] Do all your FORS MOS/LSS OBs contain the mandatory "through-slit image" template? [NA] [UVES only] Do all your UVES OBs use only the allowed templates listed on the UVES Phase 2 Web pages ? [NA] [ISAAC only] Are ALL the objects in your field-of-view fainter than the magnitude limits specified on the ISAAC Phase 2 Web page ? [NA] [ISAAC only] If you submitted OBs for standard stars, did you use the provided StandardStar templates? [NA] [FLAMES only] Did you specify the hour angle range for which your Target Setup files are valid ? [NA] [WFI only]Are your finding charts 34 arcmin x 34 arcmin? [NA] If you answered "NO" to any of these questions, please revise your OBs *before* submission.