README Template 71.1 (please do not delete the README Template Version line!) ESO Programme ID: 071.B-0359(A) Principal Investigator Name: Dr. Linda J. Smith Principal Investigator E-mail Address: ljs@star.ucl.ac.uk Principal Investigator Telephone Number: +44-20-7679-7760 Principal Investigator Postal Address: Department of Physics and Astronomy/ University College London/ Gower St./ London/ WC1E 6BT/ UK Instrument: UVES OPC Priority Class: C OPC Approved Total Execution Time: 8.0 Estimated Total Execution Time (including overheads): 07:57:40 README File Submission Date: 05 March 2003 Programme Description ===================== General Overview ---------------- The programme is designed to obtain spectroscopy of four Wolf-Rayet galaxies using two different standard UVES settings: DIC1_346+564 and DIC2_437+860 to provide full spectral coverage. The exposure times have been calculated to give a S/N of 30-40 in the continuum at the wavelengths of the Wolf-Rayet features: 4686 and 5808 A. Approved Waiver Request Summary ------------------------------- Two new targets (He 2-10; Mrk 1259) substituted for Mrk 750 and NGC 3125A. The original targets are too faint. This request was submitted on 27 February 2003. I also mailed usg-help@eso.org (ref no. USG-07018). Approval was obtained on 05 March 2003. Critical Observing Condition Constraints ---------------------------------------- Time Critical Aspects --------------------- Special Calibration Information ------------------------------- Observations of a spectrophotometric standard are required for each target observation using an identical UVES setup. These data should be acquired either before or after the target observation. The purpose of these observations is to obtain an accurate absolute flux calibration of the target spectra. We thus need the same slit width for both target and flux standard; the ESO-supplied standard calibration is not sufficient because of the large slit width. We have chosen three standards which have tabulated fluxes every 1-2 A (the Stone and Baldwin standards are no good because their fluxes are tabulated every 50 A): HD 49798 V=8.30 SpT=O6 GD 108 V=13.56 SpT=sdB Feige 67 V=11.82 SpT=sdO ToO Information --------------- This is not a ToO programme. Pre-Imaging Requirements ------------------------ No pre-imaging is required for this programme. OB Information ============== List of Science OBs with Associated Finding Charts -------------------------------------------------- Total Number of Submitted Science OBs: 8 Total Number of Submitted Finding Charts: 6 HE_2-10_DIC1,HE_2-10_DIC2 = 71.B-0359A.001.ps, 71.B-0359A.002.ps (first FC has all the details - slit position, PA (measured N through E) marked on HST image; second FC shows ground-based Keck I image for comparsion). MRK_1259_DIC1, MRK_1259_DIC2 = 71.B-0359A.003.ps (DSS image - slit should be placed on galaxy nucleus at PA=135, measured N through E. Note foreground bright star near galaxy). NGC_5253_DIC1, NGC_5253_DIC2 = 71.B-0359A.004.ps, 71.B-0359A.005.ps (first FC has all the details - slit position, PA (measured N through E) marked on HST image; second FC shows ground-based Keck I image for comparison). TOL_89_DIC1, TOL_89_DIC2 = 71.B-0359A.006.ps (HST STIS image) List of Calibration OBs with Associated Science OBs --------------------------------------------------- Total Number of Submitted Calibration OBs: 8 HE_2-10_DIC1 = CAL_HD49798_DIC1 HE_2-10_DIC2 = CAL_HD49798_DIC2 MRK_1259_DIC1 = CAL_GD108_DIC1 MRK_1259_DIC2 = CAL_GD108_DIC2 NGC_5253_DIC1 = CAL_FEIGE67_N5253_DIC1 NGC_5253_DIC2 = CAL_FEIGE67_N5253_DIC2 TOL_89_DIC1 = CAL_FEIGE67_T89_DIC1 TOL_89_DIC2 = CAL_FEIGE67_T89_DIC2 OB Compliance Checks ==================== (Y = Yes, N = No, NA = Not Applicable) Do all your OBs comply with the instrument specific requirements listed on the instrument specific Phase 2 Web pages ? [Y] If you submitted OBs for standard stars, did you specify the magnitude and spectral type of all standard stars ? [Y] Have you included OBs for any calibrations that you need but which are not a part of the Calibration Plan? [Y] [FORS only] Do all your FORS OBs use only the allowed detector read-out modes listed on the FORS1/FORS2 Phase 2 Web pages? [NA] [FORS only] Do all your FORS MOS/LSS OBs contain the mandatory "through-slit image" template? [NA] [UVES only] Do all your UVES OBs use only the allowed templates listed on the UVES Phase 2 Web pages ? [Y] [ISAAC only] Are ALL the objects in your field-of-view fainter than the magnitude limits specified on the ISAAC Phase 2 Web page ? [NA] [ISAAC only] If you submitted OBs for standard stars, did you use the provided StandardStar templates? [NA] [FLAMES only] Did you specify the hour angle range for which your Target Setup files are valid ? [NA] [WFI only]Are your finding charts 34 arcmin x 34 arcmin? [NA] If you answered "NO" to any of these questions, please revise your OBs *before* submission.