README Template 71.1 (please do not delete the README Template Version line!) ESO Programme ID: 71.A-0290(D) Principal Investigator Name: Malcolm Bremer Principal Investigator E-mail Address: M.Bremer@bristol.ac.uk Principal Investigator Telephone Number: +44-117-928-8764 Principal Investigator Postal Address: Department of Physics, Bristol University, H H Wills Physics Laboratory, Tyndall Avenue, BRISTOL, BS8 1TL, U.K. Instrument: FORS2 OPC Priority Class: B OPC Approved Total Execution Time: 10.0 hours Estimated Total Execution Time (including overheads): 10.0 hours README File Submission Date: 07 August 2003 Programme Description ===================== General Overview ---------------- This is a programme to obtain spectra of R- and I-band drop out galaxies. It is a simple program of 10 hours total execution time through two masks at 5 hours each. We have included a few slits with bright objects (meaning in the 60 sec through slit exposure, the service observer can expect from a few hundred to a few thousand counts above the background, where the count rates have been determined from deep FORS2 imaging in the same band as the through slit exposures) that can be used to check the alignment of the slitlets. Approved Waiver Request Summary ------------------------------- We do not have an approved waiver for 71.A-0290(D). Critical Observing Condition Constraints ---------------------------------------- The critical observing constraints are that the seeing should be better than 1.0" and that the sky should be clear. Time Critical Aspects --------------------- There are no time critical aspects to this submission. Special Calibration Information ------------------------------- We do not require anything beyond the standard calibration. ToO Information --------------- This is not a ToO programme. Pre-Imaging Requirements ------------------------ This program is based on pre-images obtained for 71.A-0290(C). OB Information ============== List of Science OBs with Associated Finding Charts -------------------------------------------------- Total Number of Submitted Science OBs: 10 Total Number of Submitted Finding Charts: 10 SeqA.1 = sciMXUBDF1mask1_01 = 71.A-0290D.001.ps = whole mask image SeqA.2 = sciMXUBDF1mask1_02 = 71.A-0290D.002.ps = blow up of mask SeqA.3 = sciMXUBDF1mask1_03 = 71.A-0290D.003.ps = blow up of mask SeqA.4 = sciMXUBDF1mask1_04 = 71.A-0290D.004.ps = blow up of mask SeqA.5 = sciMXUBDF1mask1_05 = 71.A-0290D.005.ps = reference star image SeqB.1 = sciMXUBDF1mask2_01 = 71.A-0290D.006.ps = whole mask image SeqB.2 = sciMXUBDF1mask2_02 = 71.A-0290D.007.ps = blow up of mask SeqB.3 = sciMXUBDF1mask2_03 = 71.A-0290D.008.ps = blow up of mask SeqB.4 = sciMXUBDF1mask2_04 = 71.A-0290D.009.ps = blow up of mask SeqB.5 = sciMXUBDF1mask2_05 = 71.A-0290D.010.ps = reference star image The finding charts are from deep I-band images (I_AB~26.7) from FORS2. We show both the field with the reference stars marked and a image where the slits are visible. List of Calibration OBs with Associated Science OBs --------------------------------------------------- Total Number of Submitted Calibration OBs: 0 OB Compliance Checks ==================== (Y = Yes, N = No, NA = Not Applicable) Do all your OBs comply with the instrument specific requirements listed on the instrument specific Phase 2 Web pages ? [Y] If you submitted OBs for standard stars, did you specify the magnitude and spectral type of all standard stars ? [NA] Have you included OBs for any calibrations that you need but which are not a part of the Calibration Plan? [NA] [FORS only] Do all your FORS OBs use only the allowed detector read-out modes listed on the FORS1/FORS2 Phase 2 Web pages? [Y] [FORS only] Do all your FORS MOS/LSS OBs contain the mandatory "through-slit image" template? [Y] [UVES only] Do all your UVES OBs use only the allowed templates listed on the UVES Phase 2 Web pages ? [NA] [ISAAC only] Are ALL the objects in your field-of-view fainter than the magnitude limits specified on the ISAAC Phase 2 Web page ? [NA] [ISAAC only] If you submitted OBs for standard stars, did you use the provided StandardStar templates? [NA] [FLAMES only] Did you specify the hour angle range for which your Target Setup files are valid ? [NA] [WFI only]Are your finding charts 34 arcmin x 34 arcmin? [NA] If you answered "NO" to any of these questions, please revise your OBs *before* submission.