README Template 71.1 (please do not delete the README Template Version line!) ESO Programme ID: 071.A-0233(A) Principal Investigator Name: Christoforos Mallouris Principal Investigator E-mail Address: mallouris@iap.fr Principal Investigator Telephone Number: +33-144328132 Principal Investigator Postal Address: Institut d'Astrophysique de Paris, 98 bis Boulevard Arago, 75014 Paris, France Instrument: FORS 2 OPC Priority Class: B OPC Approved Total Execution Time: 13.0 Estimated Total Execution Time (including overheads): 13.0 README File Submission Date: 5 March 2003 Programme Description ===================== General Overview ---------------- This is a program to get spectra of two QSO pairs, one at z=3.8 and one at z~4. The pair at z=3.8 have magnitudes of rougly 19.5 and they should be visible in the slit image during acquisition. The z~4 pair however might be too faint and so a blind offset needs to be made first. There are a total of 12 OBs, 4 for the z=3.8 pair and 8 for the z=4 pair. The spectra will be taken using a 0.7'' width LSS. All four objects were identified in the Sloan Digital Sky Survey and have accurate astrometric values. Approved Waiver Request Summary ------------------------------- Critical Observing Condition Constraints ---------------------------------------- Dark time, within 5 days from the new moon. Time Critical Aspects --------------------- Special Calibration Information ------------------------------- ToO Information --------------- Pre-Imaging Requirements ------------------------ OB Information ============== List of Science OBs with Associated Finding Charts -------------------------------------------------- Total Number of Submitted Science OBs: 12 Total Number of Submitted Finding Charts: 2 Seq "z 3.8 qso pair spectrum XX" = 71.A-0233A.01.ps Seq "z 4 qso pair spectrum XX" = 71.A-0233A.02.ps List of Calibration OBs with Associated Science OBs --------------------------------------------------- Total Number of Submitted Calibration OBs: OB Compliance Checks ==================== (Y = Yes, N = No, NA = Not Applicable) Do all your OBs comply with the instrument specific requirements listed on the instrument specific Phase 2 Web pages ? [Y] If you submitted OBs for standard stars, did you specify the magnitude and spectral type of all standard stars ? [NA] Have you included OBs for any calibrations that you need but which are not a part of the Calibration Plan? [NA] [FORS only] Do all your FORS OBs use only the allowed detector read-out modes listed on the FORS1/FORS2 Phase 2 Web pages? [Y] [FORS only] Do all your FORS MOS/LSS OBs contain the mandatory "through-slit image" template? [Y] [UVES only] Do all your UVES OBs use only the allowed templates listed on the UVES Phase 2 Web pages ? [NA] [ISAAC only] Are ALL the objects in your field-of-view fainter than the magnitude limits specified on the ISAAC Phase 2 Web page ? [NA] [ISAAC only] If you submitted OBs for standard stars, did you use the provided StandardStar templates? [NA] [FLAMES only] Did you specify the hour angle range for which your Target Setup files are valid ? [NA] [WFI only]Are your finding charts 34 arcmin x 34 arcmin? [NA] If you answered "NO" to any of these questions, please revise your OBs *before* submission.