README Template 70.1 ESO Programme ID: 70.B-0696(A) Principal Investigator Name: Buonanno Principal Investigator E-mail Address: buonanno@coma.mporzio.astro.it Principal Investigator Telephone Number: +39-6-48286408 Instrument: WFI OPC Priority Class: B OPC Approved Total Execution Time: 14.5 h Estimated Total Execution Time (including overheads): 14h 29min 56sec README File Submission Date: Programme Description ===================== General Overview ---------------- We plan to obtain multi epoch B,V data of the Sculptor Dwarf Spheroidal. Data will be collected over 4 fields, located along the major axis of the galaxy from the center to a region beyond the tidal radius. Waiver Request Summary ---------------------- No waiver requests have been done. Critical Observing Condition Constraints ---------------------------------------- We do not require particularly restrictive observing conditions. Since we are interested in relatively bright RRlyrae stars, we need "clear" conditions of the sky, an airmass less than 1.2 and a seeing equal or better of 1". We think that "grey" sky is sufficient for our purposes (moon phase <0.7 and an angular distance greater than 50 degrees) Time Critical Aspects --------------------- The ideal period to observe Sculptor dSph is September-October, but we don't have special requirements regarding the scheduling. We plan to observe 4 different fields. One of them ("sculptor_D") has just 1 OB which can be executed at any time. The other 3 fields, called "sculptor_A", "sculptor_B" and "sculptor_C" have 14 OBs each. We plan to detect RRLyrae and bright variables, therefore to improve the sampling of the light curve it is necessary that the OBs for each field are not executed one after the other. The typical time to execute current OBs is ~17min, while the periods of RRLyrae ranges from 6 to 19 hours. To accomplish this project a time interval of approximately half an hour is required between two OBs of the same field. We suggest the following observing strategies: a) the best sampling of the light curves can be obtained if the OBs (A,B,C) are executed in triplets, e.g. A_x,B_x,C_x. Note that these triplets require a total observing time of ~51 min and can be executed at any time. b) in case the previous strategy should cause problems in the scheduling of the observations we suggest to execute current OBs in couples, i.e. (A_x,B_x) ; (B_x,C_x) or (A_x,C_x). Note that all OBs of the fields A,B,C are equal (1B and 1V exposure) with exception of "sculptor_A_1" and "sculptor_B_1" which also include 1U deep exposure. Finally, if possible, we suggest to collect the data over 3 non consecutive nights. Special Calibration Information ------------------------------- We just need the standard calibration in U,B/NEW,V filters. ToO Information --------------- This is not a ToO programme. Pre-Imaging Information ----------------------- No pre-imaging is required for this programme. OB Information ============== List of Science OBs with Associated Finding Charts -------------------------------------------------- Total Number of Submitted Science OBs: 43 Total Number of Submitted Finding Charts: 4 sculptor_A_1 = 70.B-0696A.001.ps sculptor_A_2 = 70.B-0696A.001.ps sculptor_A_3 = 70.B-0696A.001.ps sculptor_A_4 = 70.B-0696A.001.ps sculptor_A_5 = 70.B-0696A.001.ps sculptor_A_6 = 70.B-0696A.001.ps sculptor_A_7 = 70.B-0696A.001.ps sculptor_A_8 = 70.B-0696A.001.ps sculptor_A_9 = 70.B-0696A.001.ps sculptor_A_10 = 70.B-0696A.001.ps sculptor_A_11 = 70.B-0696A.001.ps sculptor_A_12 = 70.B-0696A.001.ps sculptor_A_13 = 70.B-0696A.001.ps sculptor_A_14 = 70.B-0696A.001.ps sculptor_B_1 = 70.B-0696A.002.ps sculptor_B_2 = 70.B-0696A.002.ps sculptor_B_3 = 70.B-0696A.002.ps sculptor_B_4 = 70.B-0696A.002.ps sculptor_B_5 = 70.B-0696A.002.ps sculptor_B_6 = 70.B-0696A.002.ps sculptor_B_7 = 70.B-0696A.002.ps sculptor_B_8 = 70.B-0696A.002.ps sculptor_B_9 = 70.B-0696A.002.ps sculptor_B_10 = 70.B-0696A.002.ps sculptor_B_11 = 70.B-0696A.002.ps sculptor_B_12 = 70.B-0696A.002.ps sculptor_B_13 = 70.B-0696A.002.ps sculptor_B_14 = 70.B-0696A.002.ps sculptor_C_1 = 70.B-0696A.003.ps sculptor_C_2 = 70.B-0696A.003.ps sculptor_C_3 = 70.B-0696A.003.ps sculptor_C_4 = 70.B-0696A.003.ps sculptor_C_5 = 70.B-0696A.003.ps sculptor_C_6 = 70.B-0696A.003.ps sculptor_C_7 = 70.B-0696A.003.ps sculptor_C_8 = 70.B-0696A.003.ps sculptor_C_9 = 70.B-0696A.003.ps sculptor_C_10 = 70.B-0696A.003.ps sculptor_C_11 = 70.B-0696A.003.ps sculptor_C_12 = 70.B-0696A.003.ps sculptor_C_13 = 70.B-0696A.003.ps sculptor_C_14 = 70.B-0696A.003.ps sculptor_D_1 = 70.B-0696A.004.ps List of Calibration OBs with Associated Science OBs --------------------------------------------------- Total Number of Submitted Calibration OBs: 0 OB Compliance Checks ==================== Y = Yes, N = No, NA = Not Applicable Do all your OBs comply with the instrument specific requirements listed on the instrument specific Phase 2 Web pages [Y/N/NA]? y Do all your FORS OBs use only the allowed detector read-out modes listed on the FORS1/FORS2 Phase 2 Web pages? [Y/N/NA] NA Do all your FORS MOS/LSS OBs contain the mandatory "through-slit image" template? [Y/N/NA]? NA Do all your UVES OBs use only the allowed templates listed on the UVES Phase 2 Web pages [Y/N/NA]? NA If you submitted OBs for standard stars, did you specify the magnitude and spectral type of all standard stars [Y/N/NA]? NA [ISAAC only] Are ALL the objects in your field-of-view fainter than the magnitude limits specified on the ISAAC Phase 2 Web page [Y/N/NA]? NA [ISAAC only] If you submitted OBs for standard stars, did you use the provided StandardStar templates? [Y/N/NA]? NA If you answered "NO" to any of these questions, please revise your OBs *before* submission.