README Template 70.1 ESO Programme ID: 70.B-0635(A) Principal Investigator Name: Bono Principal Investigator E-mail Address: bono@coma.mporzio.astro.it Principal Investigator Telephone Number: +39-6-94286479 Instrument: WFI OPC Priority Class: B OPC Approved Total Execution Time: 27.0 h Estimated Total Execution Time (including overheads): 26h 59m 32s README File Submission Date: Programme Description ===================== General Overview ---------------- We plan to obtain multi epoch B,V data of the outer regions of the Carina Dwarf Spheroidal: we plan to observe 5 fields along the major axis and one along the minor axis of this galaxy. Together with the previous 5 fields, we also plan to collect a few B,V exposures of the central region, to properly fix the relative zero-points of the individual chips. Waiver Request Summary ---------------------- No waiver requests have been done. Critical Observing Condition Constraints ---------------------------------------- We plan to detect RRLyrae stars which have V~20.7 mag, we do not ask for particularly restrictive observing conditions. We ask for "clear" conditions of the sky, an airmass smaller than 1.2 and a seeing equal or better than 1". We think that "grey" sky is sufficient to accomplish our project (moon phase <0.7 and an angular distance greater than 60 degrees) The selected fields have the following priorities: 1 ---> car_central, car_ext_C, car_ext_D (highest) 2 ---> car_ext_B, car_ext_E 3 ---> car_ext_A, car_minor Time Critical Aspects --------------------- The ideal period to observe Carina Dsph is December-January, but we don't have special requirements regarding the scheduling. We plan to observe 7 different fields. Two of them, called "car_central" and "car_minor", have just one OB and they can be executed at any time. The other 5 fields cover the external region of the galaxy along its major axis. They are called: "car_ext_A", ..., "car_ext_E". Each of them will be observed with a number of OBs that ranges from 4 to 6 (see "OB information" below). The only requirement we have is that the OBs of the same field should not be executed one after the other, i.e. the sequence car_ext_A1,... car_ext_A6 should be avoided. On the other hand, OBs of two different fields can be executed at any time. In particular we would like to suggest the following sequences: car_ext_Cx, car_ext_Dx ; car_ext_Bx, car_ext_Ex The same approach can also be adopted for the other fields. For each field there is no constraint concerning the execution of different OBs, since they are identical (same number of exposures and same exposure time). Each OB contains B and V exposures. Finally, if possible, we suggest to collect the data over 3 non consecutive nights. Special Calibration Information ------------------------------- We need the standard calibration. ToO Information --------------- This is not a ToO programme. Pre-Imaging Information ----------------------- No pre-imaging is required for this programme. OB Information ============== List of Science OBs with Associated Finding Charts -------------------------------------------------- Total Number of Submitted Science OBs: 29 Total Number of Submitted Finding Charts: 7 car_ext_A1 = 70.B-0635A.001.ps car_ext_A2 = 70.B-0635A.001.ps car_ext_A3 = 70.B-0635A.001.ps car_ext_A4 = 70.B-0635A.001.ps car_ext_A5 = 70.B-0635A.001.ps car_ext_A6 = 70.B-0635A.001.ps car_ext_B1 = 70.B-0635A.002.ps car_ext_B2 = 70.B-0635A.002.ps car_ext_B3 = 70.B-0635A.002.ps car_ext_B4 = 70.B-0635A.002.ps car_ext_B5 = 70.B-0635A.002.ps car_ext_B6 = 70.B-0635A.002.ps car_ext_C1 = 70.B-0635A.003.ps car_ext_C2 = 70.B-0635A.003.ps car_ext_C3 = 70.B-0635A.003.ps car_ext_C4 = 70.B-0635A.003.ps car_ext_C5 = 70.B-0635A.003.ps car_ext_D1 = 70.B-0635A.004.ps car_ext_D2 = 70.B-0635A.004.ps car_ext_D3 = 70.B-0635A.004.ps car_ext_D4 = 70.B-0635A.004.ps car_ext_E1 = 70.B-0635A.005.ps car_ext_E2 = 70.B-0635A.005.ps car_ext_E3 = 70.B-0635A.005.ps car_ext_E4 = 70.B-0635A.005.ps car_ext_E5 = 70.B-0635A.005.ps car_ext_E6 = 70.B-0635A.005.ps car_central = 70.B-0635A.006.ps car_minor = 70.B-0635A.007.ps List of Calibration OBs with Associated Science OBs --------------------------------------------------- Total Number of Submitted Calibration OBs: 0 OB Compliance Checks ==================== Y = Yes, N = No, NA = Not Applicable Do all your OBs comply with the instrument specific requirements listed on the instrument specific Phase 2 Web pages [Y/N/NA]? Y Do all your FORS OBs use only the allowed detector read-out modes listed on the FORS1/FORS2 Phase 2 Web pages? [Y/N/NA] NA Do all your FORS MOS/LSS OBs contain the mandatory "through-slit image" template? [Y/N/NA]? NA Do all your UVES OBs use only the allowed templates listed on the UVES Phase 2 Web pages [Y/N/NA]? NA If you submitted OBs for standard stars, did you specify the magnitude and spectral type of all standard stars [Y/N/NA]? NA [ISAAC only] Are ALL the objects in your field-of-view fainter than the magnitude limits specified on the ISAAC Phase 2 Web page [Y/N/NA]? NA [ISAAC only] If you submitted OBs for standard stars, did you use the provided StandardStar templates? [Y/N/NA]? NA If you answered "NO" to any of these questions, please revise your OBs *before* submission.