README Template 70.1 ESO Programme ID: 70.B-0491(A) Principal Investigator Name: Roberto Maiolino Principal Investigator E-mail Address: maiolino@arcetri.astro.it Principal Investigator Telephone Number: +39-055-2752250 Instrument: OPC Priority Class: A OPC Approved Total Execution Time: 15.0h Estimated Total Execution Time (including overheads): 15:00 README File Submission Date: 19/9/02 Programme Description ===================== General Overview ---------------- The goal of these observations is to measure the broad components of Pa-beta (1.28um), Br-gamma (2.16um) and Br-alpha (4.05um) of a sample of AGN to derive the extinction curve. In all cases the finding charts where obtained from low (~2"-3") resolution images. The slit has to be located on the K band nucleus. The nucleus should be very bright and point-like in the K band and henceforth the location of the slit should be straightforward. For the acquisition of the objects in the LW observations we have selected the L filter, since in K the source might be too bright (expected magnitude between 9 and 12). Since these objects are variabile on time scales of weeks it is important that the observation of the three lines of each object are performed within a few days (no loger than 2 week) as specified below. Note: inclusion of NGC1365 (not present in Phase 1) accepted by USG-05730. Waiver Request Summary ---------------------- Critical Observing Condition Constraints ---------------------------------------- Clear. Seeing <= 1". Time Critical Aspects --------------------- IMPORTANT: Since these objects are variabile on time scales of weeks it is important that the observation of the three lines of each single object (i.e. OBs name_Jsp, name_Ksp and name_Lsp1/2) are performed within a few days (preferably on the same night); anyhow the observations in the three bands (J,K,L) for the same object should NOT be separated by more than 2-3 weeks. Note also that the flux calibration standards (CAL_*) of heach object should be taken during the same night (see below). Special Calibration Information ------------------------------- Since we require a flux calibration of 10% or better, we have provided the OBs to observe fotometric standards (with measured infrared magnitudes) with a slit of 2": these OBs are named CAL_name_(filter)sp and should be executed on the same night as the observation of the corresponding object, as specified in the comments of the OBs. SOLAR ANALOGS should be used as TELLURIC standards (since we are interested in the region close to the Hydrogen lines). ALL of our flux calibration stars can be used also as TELLURIC standards by the Calibration Plan IF observed with 1" slit (and appropriate integration time), their specs are the following: HR3421 type=G4V J=5.521 K=5.171 L=5.146 (flux standard for NGC2992,MCG-5-23-16 with the OBs CAL_NGC2992_Lsp,CAL_MCG_5_Lsp,CAL_NGC2992_Js,CAL_NGC2992_Ksp, CAL_MCG_5_Jsp,CAL_MCG_5_Ksp <- NOTE these OBs canNOT be used for telluric calibration because with 2" slit!) HR1274 type=G5V J=8.795 K=8.432 L=8.362 (J and K band flux standard for NGC526a,NGC7314,NGC1365 with the OBs CAL_NGC526a_Jsp,CAL_NGC526a_Ksp,CAL_NGC7314_Jsp,CAL_NGC7314_Ksp, CAL_NGC1365_Jsp,CAL_NGC1365_Ksp <- NOTE these OBs canNOT be used for telluric calibration because with 2" slit!) HR0088 type=G3V J=5.302 K=4.913 L=4.896 (L-band flux standard for NGC526a,NGC7314,NGC1365 with the OBs CAL_NGC526a_Lsp,CAL_NGC7314_Lsp,CAL_NGC1365_Lsp NOTE these OBs canNOT be used for telluric calibration because with 2" slit!) ToO Information --------------- Pre-Imaging Information ----------------------- OB Information ============== List of Science OBs with Associated Finding Charts -------------------------------------------------- Total Number of Submitted Science OBs: 19 Total Number of Submitted Finding Charts: 8 NGC2992_Jsp = 70.B-0491A.001.ps NGC2992_Ksp = 70.B-0491A.001.ps NGC2992_Lsp1 = 70.B-0491A.001.ps NGC2992_Lsp2 = 70.B-0491A.001.ps MGC_5_Jsp = 70.B-0491A.002.ps MGC_5_Ksp = 70.B-0491A.002.ps MGC_5_Lsp1 = 70.B-0491A.002.ps MGC_5_Lsp2 = 70.B-0491A.002.ps NGC526a_Jsp = 70.B-0491A.003.ps NGC526a_Ksp = 70.B-0491A.003.ps NGC526a_Lsp1 = 70.B-0491A.003.ps NGC526a_Lsp2 = 70.B-0491A.003.ps NGC7314_Jsp = 70.B-0491A.004.ps NGC7314_Ksp = 70.B-0491A.004.ps NGC7314_Lsp1 = 70.B-0491A.004.ps NGC7314_Lsp2 = 70.B-0491A.004.ps NGC1365_Jsp = 70.B-0491A.005.ps NGC1365_Ksp = 70.B-0491A.005.ps NGC1365_Lsp1 = 70.B-0491A.005.ps List of Calibration OBs with Associated Science OBs --------------------------------------------------- Total Number of Submitted Calibration OBs: 15 CAL_NGC2992_Jsp = 70.B-0491A.007.ps (HR3421, G4V, J = 5.5) CAL_NGC2992_Ksp = 70.B-0491A.007.ps (HR3421, G4V, K = 5.2) CAL_NGC2992_Lsp = 70.B-0491A.007.ps (HR3421, G4V, L = 5.1) CAL_MCG_5_Jsp = 70.B-0491A.007.ps (HR3421, G4V, J = 5.5) CAL_MCG_5_Ksp = 70.B-0491A.007.ps (HR3421, G4V, K = 5.2) CAL_MCG_5_Lsp = 70.B-0491A.007.ps (HR3421, G4V, L = 5.1) CAL_NGC526a_Jsp = 70.B-0491A.006.ps (HD1274, G5V, J = 8.8) CAL_NGC526a_Ksp = 70.B-0491A.006.ps (HD1274, G5V, K = 8.4) CAL_NGC526a_Lsp = 70.B-0491A.008.ps (HR0088, G3V, L = 4.9) CAL_NGC7314_Jsp = 70.B-0491A.006.ps (HD1274, G5V, J = 8.8) CAL_NGC7314_Ksp = 70.B-0491A.006.ps (HD1274, G5V, K = 8.4) CAL_NGC7314_Lsp = 70.B-0491A.008.ps (HR0088, G3V, L = 4.9) CAL_NGC1365_Jsp = 70.B-0491A.006.ps (HD1274, G5V, J = 8.8) CAL_NGC1365_Ksp = 70.B-0491A.006.ps (HD1274, G5V, K = 8.4 CAL_NGC1365_Lsp = 70.B-0491A.008.ps (HR0088, G3V, L = 4.9) OB Compliance Checks ==================== Y = Yes, N = No, NA = Not Applicable Do all your OBs comply with the instrument specific requirements listed on the instrument specific Phase 2 Web pages [Y/N/NA]? Y Do all your FORS OBs use only the allowed detector read-out modes listed on the FORS1/FORS2 Phase 2 Web pages? [Y/N/NA] NA Do all your FORS MOS/LSS OBs contain the mandatory "through-slit image" template? [Y/N/NA]? NA Do all your UVES OBs use only the allowed templates listed on the UVES Phase 2 Web pages [Y/N/NA]? NA If you submitted OBs for standard stars, did you specify the magnitude and spectral type of all standard stars [Y/N/NA]? Y [ISAAC only] Are ALL the objects in your field-of-view fainter than the magnitude limits specified on the ISAAC Phase 2 Web page [Y/N/NA]? Y (THE FLUX CALIBRATION STARS BRIGHTER THAN THE LIMIT FOR THE SW ACQUISITION ARE BEING ACQUIRED WITH 2 FAR NARROW BAND FILTERS) [ISAAC only] If you submitted OBs for standard stars, did you use the provided StandardStar templates? [Y/N/NA]? Y If you answered "NO" to any of these questions, please revise your OBs *before* submission.