README Template 70.1 ESO Programme ID: 70.B-0460(A) Principal Investigator Name: Bridges Principal Investigator E-mail Address: tjb@aaoepp.aao.gov.au Principal Investigator Telephone Number: 61-2-9372-4839 Instrument: WFI OPC Priority Class: A OPC Approved Total Execution Time: 22.0 Estimated Total Execution Time (including overheads): 22.0 README File Submission Date: 16 August 2002 Programme Description ===================== General Overview ---------------- We are using narrowband OIII and Halpha, and continuum V images, to detect planetary nebulae (PNe) in two Sculptor Group galaxies, NGC 253 and NGC 300. We will observe two fields per galaxy, so that we get complete coverage of each galaxy; thus there are 4 different galaxy fields. For each field, we wish to obtain a total integration of 6000 sec in OIII, 4200 sec on Halpha, and 5640 sec in V. To comply with ESO requirements that no OB be longer than 1 hour total, we have created 2 OBs for each field/filter combination, e.g. N253_NE_Ha_1, N253_NE_Ha_2 are identical (except for different dithering offsets), representing Halpha imaging for the NGC 253 North-East field. Each galaxy OB consists of 3 dithered observations: 3x1000 sec OIII, 3x940 sec V, and 3x700 sec Halpha; no OB is longer than 1 hour. Thus, for each galaxy field (e.g. N253_NE), there are 6 OBs, 2 for each of OIII, Halpha, and V. For our dithered galaxy images, we do *not* want to use the default dithering pattern. We do not need to create a single mosaic image from the chips combined, but instead will work on each chip separately. We have supplied a dithering pattern with shifts of 20-30" instead. In order to reduce overheads and to give us more uniform data, it would obviously be preferable to observe a given field (e.g. N253_NE) in one observing session, i.e. all 6 OBs contiguously. Waiver Request Summary ---------------------- No waiver requests have been made for this programme. Critical Observing Condition Constraints ---------------------------------------- We have specified *clear* conditions for our galaxy observations, as this was what we had in our Phase I proposal. Our main goals (detection of PNe and discrimination against HII regions, background galaxies, etc) can be done under non-photometric conditions. However, our secondary goal is to determine the PN luminosity function, so we would prefer if possible to have the observations done in photometric conditions. **However, please take data under non-photometric conditions if doing otherwise would result in no data!** We have entered seeing and moon phase/distance constraints consistent with our Phase I proposal (seeing <= 1.4", moon phase 'grey'). However, originally we had planned to do fairly short V exposures so moon phase wasn't an issue. Now we have revised this, based on recent experience, and we will be doing longer V exposures. If our fields are observed on gray nights, we request that V exposures be obtained when the moon is down, if at all possible. We wouldn't object if *all* exposures were carried out in dark time, as even the narrowband exposures will be hurt somewhat by moon; in dark time, we can work to a fainter limiting magnitude. Please note that there is no need to observe spectrophotometric standards if conditions are not photometric. Note that the observing constraints (seeing, moon-phase, etc) are much less restrictive for the standard stars. Time Critical Aspects --------------------- There are no time-critical aspects to this programme, and observing can be done throughout the semester, as long as the targets are at airmass < 2. Special Calibration Information ------------------------------- We have two kinds of calibration: observations of spectrophometric stars for photometric calibration (done along with the galaxy imaging); and skyflats in OIII, Halpha, and V (done as CalBlocks). (1) Spectrophotometric calibration: For photometric calibration of our narrow-band (and V) imaging, we request observations of spectrophometric standard stars. Standard photometric calibration carried out by ESO does not cover narrow-band imaging, so we require additional spectrophotometric calibration. Because we are not sure when in the semester our data will be obtained, we have created OBs for 3 standards (GD50, LDS749B, and LTT9491). For each standard, there are separate OBs for OIII, Halpha, and V images. We have offset the coordinates in the OBs, so that the standard star will appear roughly in the middle of chip "e" (we were worried about the star falling in the gaps between ccds otherwise). Please observe *one* spectrophotometric standard each night science OBs are obtained (choose whichever is the most appropriate RA). Only observe spectrophotometric stars under photometric conditions. The exposure times for these stars were determined from the WFI S/N calculator, but are a bit approximate because there are no WD templates there. We would like 10,000-20,000 counts in each filter. For these short exposures, no guiding or dithering is required. GD50: V= 14.06, Spectral Type= DA2 LDS749B: V= 14.67, Spectral Type= DB4 LTT9491: V= 14.11, Spectral Type= DC Finally, we would still like standard photometric calibration in the V band, which will allow us to make use of the V images for other purposes. We understand that bias frames will also be taken as part of the standard calibration programme. (2) Sky Flats: Again, narrow-band sky flats are not part of the standard calibration programme, so we request OIII and Halpha (and V) sky flats separately as calibration OBs. Please do skyflats every night you obtain science OBs. These are straight-forward, and can of course be taken in either morning or evening twilight. We ask that you dither by 20-30 arcsec between each skyflat exposure for a given filter. If you will be taking V skyflats as part of the standard calibration, you can ignore the V skyflat OB. ToO Information --------------- This is not a ToO programme. Pre-Imaging Information ----------------------- No pre-imaging is required for this programme. OB Information ============== List of Science OBs with Associated Finding Charts -------------------------------------------------- Total Number of Submitted Science OBs: 33 Total Number of Submitted Finding Charts: 7 gd50_Ha= 70.B-0460A.001.ps gd50_OI= 70.B-0460A.001.ps gd50_V = 70.B-0460A.001.ps lds749b_Ha= 70.B-0460A.002.ps lds749b_OI= 70.B-0460A.002.ps lds749b_V = 70.B-0460A.002.ps ltt9491_Ha= 70.B-0460A.003.ps ltt9491_OI= 70.B-0460A.003.ps ltt9491_V = 70.B-0460A.003.ps N253_NE_Ha_1 = 70.B-0460A.004.ps N253_NE_Ha_2 = 70.B-0460A.004.ps N253_NE_OI_1 = 70.B-0460A.004.ps N253_NE_OI_2 = 70.B-0460A.004.ps N253_NE_V_1 = 70.B-0460A.004.ps N253_NE_V_2 = 70.B-0460A.004.ps N253_SW_Ha_1 = 70.B-0460A.005.ps N253_SW_Ha_2 = 70.B-0460A.005.ps N253_SW_OI_1 = 70.B-0460A.005.ps N253_SW_OI_2 = 70.B-0460A.005.ps N253_SW_V_1 = 70.B-0460A.005.ps N253_SW_V_2 = 70.B-0460A.005.ps N300_NW_Ha_1 = 70.B-0460A.006.ps N300_NW_Ha_2 = 70.B-0460A.006.ps N300_NW_OI_1 = 70.B-0460A.006.ps N300_NW_OI_2 = 70.B-0460A.006.ps N300_NW_V_1 = 70.B-0460A.006.ps N300_NW_V_2 = 70.B-0460A.006.ps N300_SE_Ha_1 = 70.B-0460A.007.ps N300_SE_Ha_2 = 70.B-0460A.007.ps N300_SE_OI_1 = 70.B-0460A.007.ps N300_SE_OI_2 = 70.B-0460A.007.ps N300_SE_V_1 = 70.B-0460A.007.ps N300_SE_V_2 = 70.B-0460A.007.ps List of Calibration OBs with Associated Science OBs --------------------------------------------------- Total Number of Submitted Calibration OBs: 3 Skyflat_Ha Skyflat_OI Skyflat_V These are skyflats for Halpha, OIII, and V filters OB Compliance Checks ==================== Y = Yes, N = No, NA = Not Applicable Do all your OBs comply with the instrument specific requirements listed on the instrument specific Phase 2 Web pages ? [Y] Do all your FORS OBs use only the allowed detector read-out modes listed on the FORS1/FORS2 Phase 2 Web pages? [NA] Do all your FORS MOS/LSS OBs contain the mandatory "through-slit image" template? [NA] Do all your UVES OBs use only the allowed templates listed on the UVES Phase 2 Web pages? [NA] If you submitted OBs for standard stars, did you specify the magnitude and spectral type of all standard stars ? [Y] [ISAAC only] Are ALL the objects in your field-of-view fainter than the magnitude limits specified on the ISAAC Phase 2 Web page ? [NA] [ISAAC only] If you submitted OBs for standard stars, did you use the provided StandardStar templates? [NA] If you answered "NO" to any of these questions, please revise your OBs *before* submission.