README Template 70.1 ESO Programme ID: 70.B-0257(A) Principal Investigator Name: Petitjean Principal Investigator E-mail Address: petitje@iap.fr Principal Investigator Telephone Number: + 33 1 44 32 81 50 Contact Person: Isabel Marquez, isabel@iaa.es, +34 958 12 13 11 Instrument: NACO OPC Priority Class: A OPC Approved Total Execution Time: 16.0 Estimated Total Execution Time (including overheads): 15h56m38s README File Submission Date: 11 October 2002 Programme Description ===================== General Overview ---------------- This is an imaging programme for the determination of the morphology of three quasar hosts, using the quasar itself as the reference source to close the loop. To be able to improve the spatial resolution of the images, we plan to apply deconvolution technics for which we need observation of a star of similar magnitude to determine the PSF. The whole set of observations for each quasar consists of 5 identical OBs (to end up with 2.5 hours total exposure time on the quasar). The list of objects with magnitudes is the following: object Name Magnitude ------------------------------- quasar Q0043-2923 14.80 quasar PKS0405-12 14.86 quasar J0110.5-16 15.60 star star_Q0043 14.55 star star_pks0405 14.11 star star_j0110 14.54 Waiver Request Summary ---------------------- Critical Observing Condition Constraints ---------------------------------------- We need very good seeing conditions, about 0.6 arcseconds. Time Critical Aspects --------------------- Special Calibration Information ------------------------------- Standard calibration files are needed. ToO Information --------------- This is not a ToO programme. Pre-Imaging Information ----------------------- No pre-imaging is required for this programme. OB Information ============== List of Science OBs with Associated Finding Charts -------------------------------------------------- The reference object is always placed in the center (target itself), marked with R1. The box corresponds (approximatively) to the field of view of the requested camera (28 X 28 arcseconds). Total Number of Submitted Science OBs: 18 Total Number of Submitted Finding Charts: 6 SeqA.1 = 70.B-0257A.001.ps SeqA.2 = 70.B-0257A.001.ps SeqA.3 = 70.B-0257A.001.ps SeqA.4 = 70.B-0257A.001.ps SeqA.5 = 70.B-0257A.001.ps SeqB.1 = 70.B-0257A.002.ps SeqC.1 = 70.B-0257A.003.ps SeqC.2 = 70.B-0257A.003.ps SeqC.3 = 70.B-0257A.003.ps SeqC.4 = 70.B-0257A.003.ps SeqC.5 = 70.B-0257A.003.ps SeqD.1 = 70.B-0257A.004.ps SeqE.1 = 70.B-0257A.005.ps SeqE.2 = 70.B-0257A.005.ps SeqE.3 = 70.B-0257A.005.ps SeqE.4 = 70.B-0257A.005.ps SeqE.5 = 70.B-0257A.005.ps SeqF.1 = 70.B-0257A.006.ps List of Calibration OBs with Associated Science OBs --------------------------------------------------- Number of Submitted Calibration OBs: 0 OB Compliance Checks ==================== Y = Yes, N = No, NA = Not Applicable Do all your OBs comply with the instrument specific requirements listed on the instrument specific Phase 2 Web pages [Y]? Do all your FORS OBs use only the allowed detector read-out modes listed on the FORS1/FORS2 Phase 2 Web pages? [NA] Do all your FORS MOS/LSS OBs contain the mandatory "through-slit image" template? [NA]? Do all your UVES OBs use only the allowed templates listed on the UVES Phase 2 Web pages [NA]? If you submitted OBs for standard stars, did you specify the magnitude and spectral type of all standard stars [NA]? [ISAAC only] Are ALL the objects in your field-of-view fainter than the magnitude limits specified on the ISAAC Phase 2 Web page [NA]? [ISAAC only] If you submitted OBs for standard stars, did you use the provided StandardStar templates? [NA]? If you answered "NO" to any of these questions, please revise your OBs *before* submission.