README Template 70.1 ESO Programme ID: 70.A-0591(B) Principal Investigator Name: Daddi Principal Investigator E-mail Address: edaddi@eso.org Principal Investigator Telephone Number: +49-89-3200-6420 Instrument: ISAAC OPC Priority Class: A OPC Approved Total Execution Time: 20.0 hours Estimated Total Execution Time (including overheads): 20.0 hours README File Submission Date: 16 August 2002 Programme Description ===================== General Overview ---------------- This program requires deep imaging of the cluster A1689, using filter SZ. Four pointings are used in order to CONTIGUOUSLY cover a field of approximately 5x5 arcmin, centered on A1689. | Q1 SW of A1689 | Q2 NW of A1689 ---C--- Q3 SE of A1689 | Q4 NE of A1689 | The four pointings are simmetric around the cluster center (we use 13:11:30 -01:20:28 as the center C, see above) and mutually adjacent. The finding charts describe the ISAAC field at the starting position of each pointing (please note that the finding charts are deep R-band Keck images). Waiver Request Summary ---------------------- Critical Observing Condition Constraints ---------------------------------------- IMPORTANT: Each of the two spectrophotometric OBs should be possibly executed in the same night of one of the two "ZERO" OBs submitted. The sky coordinates of the two target stars are such that no large time window for their observability are available during February and March. (We decided to calibrate only two pointings, as the large overlapp between the different pointings will allow a sufficient accurate photometric cross calibration with common objects.) Time Critical Aspects --------------------- Special Calibration Information ------------------------------- We have submitted two OBs for spectrophotometric standard stars observations, as specified in the phase1 proposal. The same stars will be observed during the FORS2 run of the same program, in order to accurately calibrate the FORS2-ISAAC relative photometry. The magnitudes of the selected stars are AB~14.5 at 1.05mu and the spectral type is WD (see http://www.eso.org/observing/standards/spectra/wdstandards.html) ToO Information --------------- Pre-Imaging Information ----------------------- OB Information ============== List of Science OBs with Associated Finding Charts -------------------------------------------------- Total Number of Submitted Science OBs: 22 Total Number of Submitted Finding Charts: 6 ZERO_A1686_Q1_1 | A1686_Q1_2 | A1686_Q1_3 | 70.A-0591B.001.ps A1686_Q1_4 | A1686_Q1_5 | A1686_Q2_1 | A1686_Q2_2 | A1686_Q2_3 | 70.A-0591B.002.ps A1686_Q2_4 | A1686_Q2_5 | A1686_Q3_1 | A1686_Q3_2 | A1686_Q3_3 | 70.A-0591B.003.ps A1686_Q3_4 | A1686_Q3_5 | ZERO_A1686_Q4_1 | A1686_Q4_2 | A1686_Q4_3 | 70.A-0591B.004.ps A1686_Q4_4 | A1686_Q4_5 | CAL_STD_GD71 | 70.A-0591B.005.ps CAL_STD_GD153 | 70.A-0591B.006.ps List of Calibration OBs with Associated Science OBs --------------------------------------------------- Total Number of Submitted Calibration OBs: 2 OB Compliance Checks ==================== Y = Yes, N = No, NA = Not Applicable Do all your OBs comply with the instrument specific requirements listed on the instrument specific Phase 2 Web pages [Y]? Do all your FORS OBs use only the allowed detector read-out modes listed on the FORS1/FORS2 Phase 2 Web pages? [NA] Do all your FORS MOS/LSS OBs contain the mandatory "through-slit image" template? [NA]? Do all your UVES OBs use only the allowed templates listed on the UVES Phase 2 Web pages [NA]? If you submitted OBs for standard stars, did you specify the magnitude and spectral type of all standard stars [Y]? [ISAAC only] Are ALL the objects in your field-of-view fainter than the magnitude limits specified on the ISAAC Phase 2 Web page [Y]? [ISAAC only] If you submitted OBs for standard stars, did you use the provided StandardStar templates? [Y]? If you answered "NO" to any of these questions, please revise your OBs *before* submission. Destination Address for Data Products ===================================== Emanuele Daddi ESO Karl-Schwarzschild-Str 2 D-85748 Garching GERMANY