README Template 70.1 ESO Programme ID: 70.A-0160(A) Principal Investigator Name: Alain SMETTE Principal Investigator E-mail Address: Alain.Smette@ulg.ac.be Principal Investigator Telephone Number: +32-4-366 97 64 Instrument: UVES OPC Priority Class: A OPC Approved Total Execution Time: 18h Estimated Total Execution Time (including overheads): 18h00m20s README File Submission Date: August 28, 2002 Revised Version Submission Date: September 5, 2002 Programme Description ===================== General Overview ---------------- The UVES spectra of the two components of a z = 4.5 gravitationally lensed system (Q0952-0115) will be used to analyse the small scale structure of a galaxy located at a redshift = 4, revealed by the Damped Hydrogen Ly-alpha line seen in the spectrum of the bright component. Note that light with wavelength shorter than about 470 nm is completely absorbed by intergalactic hydrogen (Ly-alpha forest). The two components, separated by 1", are observed together: they will appear together in the slit. Two settings are used in order to cover the whole spectral range accessible. Position is: RA(2000): 09 55 00. Dec(2000): -01 30 05 The separation between the two components in RA and delta are: RA(B) - RA(A) = -0.696" delta(B) - delta(A) = -0.709" Waiver Request Summary ---------------------- N/A Critical Observing Condition Constraints ---------------------------------------- The two components should both be visible within the slit, although the faint component (B) will be difficult. Ideally, we would like to have the faint component close to the center of the slit. so that we are sure that it will be well centered. In practice centering should be done using the bright, R= 19.2, A component. Once done, the blind offset centers the faint, R = 20.5, B component. HOWEVER, in order to avoid fixed patterns in the detector or produced by the data reduction as much as possible, a small offset along the slit is added. Depending on the OB, this offset varies from -1.08 arcsec to +1.08 arcsec. Time Critical Aspects --------------------- N/A Special Calibration Information ------------------------------- Observations of the standard star HD49798 are also requested. This O6 star will be used to identify telluric lines in the spectra. Two OBs, at 2 different airmasses (1.1 and 1.4) are requested. These OBs have identical settings (slit width, derotation mode on sky, use of ADC) as the science OBs. The only difference is the position angle, left at 0. As an appropriate set of OBs for satisfactory correction of telluric lines would use half of the allocated time, and not useful in many cases (airmass is not the only factor affecting the strength of telluric lines), these OBs together with other stars observed by UVES should provide enough information for our purpose. Coordinates of HD 49798: RA(2000): 06h48m04.64s DEC(2000): -44d18'59" V = 8.3 B-V = -0.3 This star could be observed during twilight. The corresponding OBs can be executed at any time, independenly of the main science OBs. ToO Information --------------- N/A Pre-Imaging Information ----------------------- N/A OB Information ============== For Q0952, 2 kinds of OBs are given: OB_Q0952-580_* involves the CD#3, central wavelength 580, and covers mostly the Ly-alpha forest. OB_Q0952-860_* involves the CD#4, central wavelength 860, and covers the spectrum redwards of the Ly-alpha emission line. telluric-std-* are identical to OB_Q0952-860_* except for the position angle of the slit, left at 0. List of Science OBs with Associated Finding Charts -------------------------------------------------- Total Number of Submitted Science OBs: 20 Total Number of Submitted Finding Charts: 3 For all OBs of Q0952, we provide 2 finding charts: one with a large field (5 arcmin across): 70.A-0160A.001.ps one image obtained with HST, with a scale of 1" shown : 70.A-0160A.002.ps The slit must be aligned along both A and B components (a galaxy can be seen in the finding chart 70.A-0160A.002.ps, between the two components. It will not affect the observations). The corresponding position angle for the slit is 224deg47'. This information is repeated in the file 70.A-0160A.002.ps. List of OBs: Priority OB_Q0952-580-0.obx 1 OB_Q0952-580-1.obx 2 OB_Q0952-580-2.obx 3 OB_Q0952-580-3.obx 4 OB_Q0952-580-4.obx 5 OB_Q0952-580-5.obx 6 OB_Q0952-580-6.obx 7 OB_Q0952-580-7.obx 8 OB_Q0952-580-8.obx 9 OB_Q0952-860-0.obx 1 OB_Q0952-860-1.obx 2 OB_Q0952-860-2.obx 3 OB_Q0952-860-3.obx 4 OB_Q0952-860-4.obx 5 OB_Q0952-860-5.obx 6 OB_Q0952-860-6.obx 7 OB_Q0952-860-7.obx 8 OB_Q0952-860-8.obx 9 As you can see from the priorities, ideally, alternance between the two settings is preferred. A finding chart for the V = 8.30 star HD49798 is provided, for completeness...: 70.A-0160A.003.ps. It concerns the following 2 OBs: telluric-std-0 telluric-std-1 List of Calibration OBs with Associated Science OBs --------------------------------------------------- N/A Total Number of Submitted Calibration OBs: 0 OB Compliance Checks ==================== Y = Yes, N = No, NA = Not Applicable Do all your OBs comply with the instrument specific requirements listed on the instrument specific Phase 2 Web pages [Y/N/NA]? Y Do all your FORS OBs use only the allowed detector read-out modes listed on the FORS1/FORS2 Phase 2 Web pages? [Y/N/NA] NA Do all your FORS MOS/LSS OBs contain the mandatory "through-slit image" template? [Y/N/NA]? NA Do all your UVES OBs use only the allowed templates listed on the UVES Phase 2 Web pages [Y/N/NA]? Y If you submitted OBs for standard stars, did you specify the magnitude and spectral type of all standard stars [Y/N/NA]? Y [ISAAC only] Are ALL the objects in your field-of-view fainter than the magnitude limits specified on the ISAAC Phase 2 Web page [Y/N/NA]? NA [ISAAC only] If you submitted OBs for standard stars, did you use the provided StandardStar templates? [Y/N/NA]? NA If you answered "NO" to any of these questions, please revise your OBs *before* submission.