README Template 69.1 ESO Programme ID: 69.D-0063(A) Principal Investigator Name: Van Eck Principal Investigator E-mail Address: svaneck@astro.ulb.ac.be Principal Investigator Telephone Number: +32-2-6502863 Instrument: UVES OPC Priority Class: B OPC Approved Total Execution Time: 24.0 Estimated Total Execution Time (including overheads): 24.0 README File Submission Date: 19 February 2002 Programme Description ===================== General Overview ---------------- This program is an exploratory one which aims at finding more `lead stars' (i.e., metal-poor, s-process-rich stars with Pb/Ba ratios >> 1; see Van Eck et al., 2001, Nature 412, 793). The target list has been divided into different classes: Class 1: Bright, confirmed lead stars from the Henry Draper (HD) catalog, OD "Bismuth". Class 2: Candidate lead stars from the Henry Draper (HD) catalog, and 3 brightest metal-poor stars from the Hamburg/ESO survey (stars designated by HE...) and the HK survey (CS...).. OD "Lead_Highres". Class 3: Fainter HE and CS stars; OD "Lead_lowres". For the three stars of class 1, we want to detect the BiI line at 306.772 nm, as well as detect lead lines in the domain 350-370 nm. To this aim, we use DIC1 with CD#1 (346) and CD#3 (564) [DIC1 with CD#3 is used, instead of just the blue arm, because this gives us access to a lot more lines from heavy elements in the red part of the spectrum.] The highest resolution is needed to detect the Bi line (blue slit of 0"4). Good flats below 350 nm are needed as well (see section on the calibration requirements). For stars of class 2, we use DIC1 with CD#2 (390) and CD#3 (564) to have an almost full spectral coverage of the 330 - 670 nm domain. Here we aim at several lines from `exotic' heavy elements (including Pb) lying mainly in the range 350 - 450 nm. The highest resolution is reached by closing the slits to 0"4 (no CCD binning). For the three faintest stars of class 2 (HE 1410+0213, CS 22942-19 and CS 30322-23), we require two exposures of about 1h each. Separate OBs are provided for these two exposures; optimally, they may be taken one after the other, but this is not mandatory. For stars from class 3, in the BLUE arm, we degrade the resolution by selecting the 2x2 binning (and a slit width of 0"8) to get reasonable S/N ratios within 1h exposure time. In the RED arm, we keep the high resolution (slit 0"4 and no CCD binning). The ODs "Bismuth" and "Lead_highres" generally have priority over the ODs "Lead_lowres" (but see the priority assignments for a finer ranking). Waiver Request Summary ---------------------- No waiver request. Critical Observing Condition Constraints ---------------------------------------- The faintest stars should be observed with less than 50% moon illumination ("Moon_grey"). Although we were not allowed to specify a constraint on seeing at phase 2, high resolution observations performed with a slit of 0"4 (corresponding to ODs = "Bismuth" or "lead_highres") should preferably be performed with a seeing of 1" or better. Time Critical Aspects --------------------- None Special Calibration Information ------------------------------- The OBs "HD 26_Bi", "HD 168214_Bi" and "HD 196944_Bi" should come with a good master FF obtained with the deuterium lamp (since we aim at detecting the BiI line at 306.772 nm). We didn't attach calibration OBs, hoping that some 20 or 30 deuterium-lamp FFs could be obtained during daytime. The OB "BD+25 4655_telluric" uses an UVES spectrophotometric standard star to identify telluric lines in the red part of the spectrum for the setting we use. ToO Information --------------- This is not a ToO programme. Pre-Imaging Information ----------------------- No pre-imaging is required for this programme. OB Information ============== List of Science OBs with Associated Finding Charts -------------------------------------------------- Total Number of Submitted Science OBs: 27 Total Number of Submitted Finding Charts: 23 HD 168214_Bi = 69.D-0063A.001.ps HD 196944_Bi = 69.D-0063A.002.ps HD 26_Bi = 69.D-0063A.003.ps HD 187861 = 69.D-0063A.004.ps HD 211173 = 69.D-0063A.005.ps HD 224959 = 69.D-0063A.006.ps V Ari = 69.D-0063A.007.ps HD 189711 = 69.D-0063A.008.ps HD 218875 = 69.D-0063A.009.ps HD 206983 = 69.D-0063A.010.ps HD 207585 = 69.D-0063A.011.ps HD 219116 = 69.D-0063A.012.ps HD 5424 = 69.D-0063A.013.ps HD 24035 = 69.D-0063A.014.ps HE 1410+0213 = 69.D-0063A.028.ps HE 1001-0243 = 69.D-0063A.029.ps HE 1419-1324 = 69.D-0063A.031.ps CS 22942-19 = 69.D-0063A.033.ps CS 22891-171 = 69.D-0063A.037.ps CS 30322-23 = 69.D-0063A.039.ps CS 22956-28 = 69.D-0063A.040.ps CS 22945-17 = 69.D-0063A.043.ps CS 22953-3 = 69.D-0063A.045.ps List of Calibration OBs with Associated Science OBs --------------------------------------------------- Number of Submitted Calibration OBs: 0 OB Compliance Checks ==================== Y = Yes, N = No, NA = Not Applicable Do all your OBs comply with the instrument specific requirements listed on the instrument specific Phase 2 Web pages? [Y] Do all your FORS OBs use only the allowed detector read-out modes listed on the FORS1/FORS2 Phase 2 Web pages? [NA] Do all your FORS MOS/LSS OBs contain the mandatory "through-slit image" template? [NA] Do all your UVES OBs use only the allowed templates listed on the UVES Phase 2 Web pages? [Y] If you submitted OBs for standard stars, did you specify the magnitude and spectral type of all standard stars? [NA] [ISAAC only] Are ALL the objects in your field-of-view fainter than the magnitude limits specified on the ISAAC Phase 2 Web page? [NA] [ISAAC only] If you submitted OBs for standard stars, did you use the provided StandardStar templates? [NA] If you answered "NO" to any of these questions, please revise your OBs *before* submission. Destination Address for Data Products ===================================== Dr. Sophie Van Eck Institut d'Astronomie et d'Astrophysique Universite Libre de Bruxelles CP 226 Boulevard du Triomphe B-1050 Bruxelles BELGIUM