README Template 69.1 ESO Programme ID: 69.B-0229(A) Principal Investigator: Roeser PI Name: Hermann-Josef Roeser PI E-mail Address: roeer@mpia.de PI Telephone Number: +49 (0)6221 528 209 Instrument: ISAAC OPC Priority Class: A OPC Approved Total Execution Time: 12h Estimated Total Execution Time (including overheads): 12:00:00 README File Submission Date: 20.02.2002 Programme Description ===================== General Overview ---------------- J-band Imaging of the faint inner 10" of the jet of the bright QSO 3C273. 12 dither positions per OB of about 50 min. Intended dither positions for QSO are indicated on finding chart. There are 15 OBs which are identical apart from small shifts of the entire dither pattern. Contiguous execution of science templates is possible without re-acquisition if the hour angle constraint permits (see Critical Constraints). The DIT of 5s is somewhat short for broad-band imaging, but the QSO is already saturated in this time. The acquisition templates therefore use a narrow-band filter (NB1.21). Waiver Request Summary ---------------------- N/A Critical Observing Condition Constraints ---------------------------------------- During a science template, the hour angle MUST be INSIDE the range [-1h 05m, 1h 05m]. Otherwise, the QSO's diffraction spike will cross the jet and the corresponding images will be wasted. The QSO's right ascension is 12h 29m 06.7s. This means that the science templates should be started AFTER LST 11:25, but BEFORE LST 12:50. Time Critical Aspects --------------------- N/A Special Calibration Information ------------------------------- N/A ToO Information --------------- N/A Pre-Imaging Information ----------------------- N/A OB Information ============== List of Science OBs with Associated Finding Charts -------------------------------------------------- NB As no appropriate NIR finding chart was available, the image is an R-band FORS image. Brightest objects have J-magnitudes indicated. All OBs are identical apart from small shifts of the dither patterns and their science templates can be executed contiguously. The telescope offset between the acquisition and the first science exposure is intentional and serves to optimize the dither pattern, in particular for contigous execution of OBs. 3C273J-15 69.B-0229A.001.ps 3C273J-14 69.B-0229A.001.ps 3C273J-13 69.B-0229A.001.ps 3C273J-12 69.B-0229A.001.ps 3C273J-11 69.B-0229A.001.ps 3C273J-10 69.B-0229A.001.ps 3C273J-9 69.B-0229A.001.ps 3C273J-8 69.B-0229A.001.ps 3C273J-7 69.B-0229A.001.ps 3C273J-6 69.B-0229A.001.ps 3C273J-5 69.B-0229A.001.ps 3C273J-4 69.B-0229A.001.ps 3C273J-3 69.B-0229A.001.ps 3C273J-2 69.B-0229A.001.ps 3C273J-1 69.B-0229A.001.ps 3C273J-0 69.B-0229A.001.ps Total Number of Submitted Science OBs: 16 Total Number of Submitted Finding Charts: 1 List of Calibration OBs with Associated Science OBs --------------------------------------------------- Total Number of Submitted Calibration OBs: 0 OB Compliance Checks ==================== Y = Yes, N = No, NA = Not Applicable Do all your OBs comply with the instrument specific requirements listed on the instrument specific Phase 2 Web pages? Y Do all your FORS OBs use only the allowed detector read-out modes listed on the FORS1/FORS2 Phase 2 Web pages? NA Do all your FORS MOS/LSS OBs contain the mandatory "through-slit image" template? NA Did you submit the mandatory calibration OBs for each FORS MOS mask setup? NA Do all your UVES OBs use only the allowed templates listed on the UVES Phase 2 Web pages? NA If you submitted OBs for standard stars, did you specify the magnitude and spectral type of all standard stars? NA [ISAAC only] Are ALL the objects in your field-of-view fainter than the magnitude limits specified on the ISAAC Phase 2 Web page? Y -Brightest object is the quasar with J approx. 11.7 [ISAAC only] If you submitted OBs for standard stars, did you use the provided StandardStar templates? NA If you answered "NO" to any of these questions, please revise your OBs *before* submission. Destination Address for Data Products ===================================== Dr. Hermann-Josef Roeser Max-Planck-Institut für Astronomie Königstuhl 17 69117 Heidelberg Germany