README Template 68.1 ESO Programme ID: 68.A-0176(A) Principal Investigator: Jerjen Contact Person Name: Helmut Jerjen Contact Person E-mail Address: jerjen@mso.anu.edu.au Contact Person Telephone Number: +61 26 125 8038 Instrument: FORS1 OPC Priority Class: A OPC Approved Total Execution Time: 25.0 Estimated Total Execution Time (including overheads): 24.8 README File Submission Date: 10 August 2001 Programme Description ===================== In this program we are going to do deep CCD imaging of 20 low surface brightness dwarf galaxies in the Fornax cluster. All target galaxies will be observed in the $B$-band (B\_BESS+34) and in the $R$-band (R\_BESS+36), using the Standard Resolution Mode (COLL\_SR+1, $0.2''$ per pixel). No CCD windowing is applied (FOV: $6.8'$x$6.8'$). The ccd port binning and gain is set to: ABCD, 1x1, high, for all exposures. General Overview ---------------- The observing program encompasses 20 pairs of 2 OBs (40 in total) which are listed below. In principle, each OB is individual and independent of the others, ie. they can be carried out in arbitrary order within the given constrains. An OB consists of a series of 3 exposures with a slight offset (duration: $3\times 500-3\times 700$ seconds, using a guide star). The total observing time for all OBs including overheads is 24h 46min. The allocated time for this project is 25 hours. Waiver Request Summary ---------------------- N/A Critical Observing Condition Constraints ---------------------------------------- Due to the length of the program and the airmass constraints in the OBs, data acquisition has to be carried out over several nights. All OBs should be executed under photometric conditions. From every night in which data for the program will be taken, we ask for the following technical images from the VLT Calibration Program taken in the same mode as defined by our observing program (i) all biases (ii) all sky flats (iii) all screen flats, and (iv) all images of photometric standards in all filters. Time Critical Aspects --------------------- None Special Calibration Information ------------------------------- None ToO Information --------------- This is not a ToO programme. Pre-Imaging Information ----------------------- No pre-imaging is required for this programme. OB Information ============== List of Science OBs with Associated Finding Charts -------------------------------------------------- Total Number of Submitted Science OBs: 40 Total Number of Submitted Finding Charts: 40 OB FC FCC043B 68.A-0176A.001.ps FCC043R 68.A-0176A.002.ps FCC050B 68.A-0176A.003.ps FCC050R 68.A-0176A.004.ps FCC082B 68.A-0176A.005.ps FCC082R 68.A-0176A.006.ps FCC085B 68.A-0176A.007.ps FCC085R 68.A-0176A.008.ps FCC274B 68.A-0176A.009.ps FCC274R 68.A-0176A.010.ps FCC100B 68.A-0176A.011.ps FCC100R 68.A-0176A.012.ps FCC116B 68.A-0176A.013.ps FCC116R 68.A-0176A.014.ps FCC136B 68.A-0176A.015.ps FCC136R 68.A-0176A.016.ps FCC150B 68.A-0176A.017.ps FCC150R 68.A-0176A.018.ps FCC206B 68.A-0176A.019.ps FCC206R 68.A-0176A.020.ps FCC207B 68.A-0176A.021.ps FCC207R 68.A-0176A.022.ps FCC222B 68.A-0176A.023.ps FCC222R 68.A-0176A.024.ps FCC243B 68.A-0176A.025.ps FCC243R 68.A-0176A.026.ps FCC245B 68.A-0176A.027.ps FCC245R 68.A-0176A.028.ps FCC252B 68.A-0176A.029.ps FCC252R 68.A-0176A.030.ps FCC266B 68.A-0176A.031.ps FCC266R 68.A-0176A.032.ps FCC279B 68.A-0176A.033.ps FCC279R 68.A-0176A.034.ps FCC296B 68.A-0176A.035.ps FCC296R 68.A-0176A.036.ps FCC303B 68.A-0176A.037.ps FCC303R 68.A-0176A.038.ps FCC318B 68.A-0176A.039.ps FCC318R 68.A-0176A.040.ps List of Calibration OBs with Associated Science OBs --------------------------------------------------- Number of Submitted Calibration OBs: 0 OB Compliance Checks ==================== Y = Yes, N = No, NA = Not Applicable Do all your OBs comply with the instrument specific requirements listed on the instrument specific Phase 2 Web pages ? Y Do all your FORS OBs use only the allowed detector read-out modes listed on the FORS1/FORS2 Phase 2 Web pages? Y Do all your FORS MOS/LSS OBs contain the mandatory "through-slit image" template? NA Do all your UVES OBs use only the allowed templates listed on the UVES Phase 2 Web pages ? NA If you submitted OBs for standard stars, did you specify the magnitude and spectral type of all standard stars [NA]? NA [ISAAC only] Are ALL the objects in your field-of-view fainter than the magnitude limits specified on the ISAAC Phase 2 Web page? NA [ISAAC only] If you submitted OBs for standard stars, did you use the provided StandardStar templates? NA If you answered "NO" to any of these questions, please revise your OBs *before* submission. Destination Address for Data Products ===================================== Dr Helmut Jerjen Research School of Astronomy and Astrophysics The Australian National University Mt. Stromlo Observatory Cotter Road Weston ACT 2611 Australia *************************************** DO NOT WRITE BELOW THESE LINES!!!!!!!!! ***************************************