README Template 68.1 ESO Programme ID: 68.A-0141(A) Principal Investigator: Lobo Contact Person Name: Catarina Lobo Contact Person E-mail Address: lobo@astro.up.pt Contact Person Telephone Number: +351-226089838 Instrument: FORS2 OPC Priority Class: B OPC Approved Total Execution Time: 4.7 Estimated Total Execution Time (including overheads): 4.7 README File Submission Date: 9 August 2001 Programme Description ===================== General Overview ---------------- This program aims at confirming member galaxies of a z=0.64 cluster; it makes use of the MXU mode of FORS2 to get low resolution spectra of galaxy cluster member candidates (grism 300V+20 + filter GG435). Waiver Request Summary ---------------------- No Waiver Requests. Critical Observing Condition Constraints ---------------------------------------- The constraints for these observations are the following: - Seeing 0".8 --> 0".9 still acceptable - Sky Clear - Airmass 2 - Lunar illumination 0.3 - Moon distance 45 deg. Time Critical Aspects --------------------- None. Special Calibration Information ------------------------------- We would like the observer to get also spectra of ONE radial velocity standard (chosen among the two we provide with the OBs) and of ONE spectrophotometric standard (eg. LTT2415 or another one in case a different RA is more convenient at the time of observation). ToO Information --------------- This is not a ToO programme. Pre-Imaging Information ----------------------- None. OB Information ============== List of Science OBs with Associated Finding Charts -------------------------------------------------- Total Number of Submitted Science OBs: 5 Total Number of Submitted Finding Charts: 16 sciMXU CL0048_m1 = 68.A-0141A.011.ps, 68.A-0141A.012.ps, 68.A-0141A.013.ps sciMXU CL0048_m2 = 68.A-0141A.021.ps, 68.A-0141A.022.ps, 68.A-0141A.023.ps sciMXU CL0048_m3 = 68.A-0141A.031.ps, 68.A-0141A.032.ps, 68.A-0141A.033.ps sciMXU CL0048_m4 = 68.A-0141A.041.ps, 68.A-0141A.042.ps, 68.A-0141A.043.ps sciMXU CL0048_m5 = 68.A-0141A.051.ps, 68.A-0141A.052.ps, 68.A-0141A.053.ps, 68.A-0141A.054.ps Some comments on the magnifications, to help who is checking the slit positioning: 68.A-0141A.012.ps -> slit #1: two objects are targetted in this slit. 68.A-0141A.013.ps -> slits #5 and #15: the bright object at the center of each one of these slits is the one to be targetted (in each case, there's a closeby fainter object towards the NE, closer to the edge of the slit, that is not to be forced to fit in the slit also). 68.A-0141A.022.ps -> slit #21 targets two objects; slit #22 targets one object (the brigh one) while possibly getting light from fainter one or extension of the main object (to the East). 68.A-0141A.023.ps -> slit #17 is centered on a rather faint object; slit #10 targets the brighter object, a bit towards the Eastern edge of the slit (a fainter low priority object is seen towards the W and some of its light may be captured). 68.A-0141A.031.ps -> Really small-length slits (around 5arcsecs long) were positioned on very low priority objects, just to take advantage of available corridors left inbetween high priority slits. If these are not feasible, then remove these slits (#12, #13 - this one can be seen in 68.A-0141A.032.ps). 68.A-0141A.032.ps -> slit #2 targets two objects. 68.A-0141A.033.ps -> the object of interest in slit #6 is the bright one (there is a fainter object, closeby to the NE, not to be forced into the slit). 68.A-0141A.042.ps -> slit #6 targets a faint object. 68.A-0141A.043.ps -> slit #24 targets two objects. 68.A-0141A.052.ps -> slit #1 targets two (high priority) objects; slit #2 targets a faint (low priority) object (close to the edge of the slit). 68.A-0141A.053.ps -> slits #6 and #12 (also seen in 68.A-0141A.054.ps) target the brightest object that is visible in each slit, respectively, but may also collect light from fainter low priority objects (towards the SE in each slit); 68.A-0141A.054.ps -> slits #15 targets two objects (the one towards NW, centered in the slit, is the high priority one). List of Calibration OBs with Associated Science OBs --------------------------------------------------- Number of Submitted Calibration OBs: 2 + 1 2 OBs for two radial velocity standards. Only ONE should be observed, chosen according to the most convenient RA. Notice that as these are bright stars, a filter has to be used for target acquisition (I put H_alpha/4500+61, but any other filter will do): std rad_vel_starHD9138 std rad_vel_starHD203638 1 OB for Dome Flat Field + Arc for the radial velocity setting: cal rad_vel_std NOTE: I need arcs and screen flatfields for all my five science masks (sciMXU CL0048_m1 to sciMXU CL0048_m4). As assured by the FORS Calibration Plan, I submit no OBs for these. OB Compliance Checks ==================== Y = Yes, N = No, NA = Not Applicable Do all your OBs comply with the instrument specific requirements listed on the instrument specific Phase 2 Web pages [Y]? Do all your FORS OBs use only the allowed detector read-out modes listed on the FORS1/FORS2 Phase 2 Web pages? [Y] Do all your FORS MOS/LSS OBs contain the mandatory "through-slit image" template? [Y]? Do all your UVES OBs use only the allowed templates listed on the UVES Phase 2 Web pages [NA]? If you submitted OBs for standard stars, did you specify the magnitude and spectral type of all standard stars [Y]? [ISAAC only] Are ALL the objects in your field-of-view fainter than the magnitude limits specified on the ISAAC Phase 2 Web page [NA]? [ISAAC only] If you submitted OBs for standard stars, did you use the provided StandardStar templates? [NA]? If you answered "NO" to any of these questions, please revise your OBs *before* submission. Destination Address for Data Products ===================================== Catarina Lobo Centro de Astrofisica da Universidade do Porto Rua das Estrelas 4150-762 Porto PORTUGAL *************************************** DO NOT WRITE BELOW THESE LINES!!!!!!!!! ***************************************