README Template 73.1 (please do not delete the README Template Version line!) ESO Programme ID: 273.D-5038 Principal Investigator Name: Albert Zijlstra Principal Investigator E-mail Address: a.zijlstra@umist.ac.uk Principal Investigator Telephone Number: +44-161-200-3925 Principal Investigator Postal Address: UMIST, department of Physics, P.O. Box 88, Manchester M60 1QD, UK Instrument: WFI OPC Priority Class: B OPC Approved Total Execution Time: 2hr Estimated Total Execution Time (including overheads): 1h59m50sec README File Submission Date: 12 July 2004 Programme Description ===================== General Overview ---------------- Goal of the program is deep Halpha images of the area around N6302. Three science OBs are attached N6302-Ha: 4 times 750 seconds through filter 856 N6302-off: 4 times 450 seconds through filter 866 N6302-Ha-s 4 times 140 seconds through filter 856 A dither is used which initially moves the source 2 arcminutes both in RA and DEC, and dithers by 30 arcsec around this position. This is to avoid havnig the central source near or within the CCD gaps. The dither of 30 arcsec is to try to ensure no sky position falls within a gap twice. Calibration OBs are atached for dome flats through the two non-standard filters and for twilight flats. It is essential to obtain one of these two sets. In case of logistical problems, the second set has lower priority and may be abandoned. Approved Waiver Request Summary ------------------------------- N/A Critical Observing Condition Constraints ---------------------------------------- Time Critical Aspects --------------------- N/A Special Calibration Information ------------------------------- OBs for dome flats and twilight flats have been submitted. In case this exceeds the possibilities within the available time, either of these will suffice ToO Information --------------- N/A Pre-Imaging Requirements ------------------------ N/A Source of preimaging: OB Information ============== List of Science OBs ------------------- N6302-Ha N6302-off N6302-Ha-s Total Number of Submitted Science OBs: 3 List of Calibration OBs with Associated Science OBs --------------------------------------------------- skyflats_856 (N6302_ha, N6302-Ha-s) skyflats_866 (N6302_off) domeflats-856 (N6302_ha, N6302-Ha-s) domeflats-866 (N6302_off) Total Number of Submitted Calibration OBs: 4 OB Compliance Checks ==================== (Y = Yes, N = No, NA = Not Applicable) Do all your OBs comply with the instrument specific requirements listed on the instrument specific Phase 2 Web pages ? [Y] Do all your Finding Charts comply with the both the general and instrument-specific finding chart requirements? [Y] If you submitted OBs for standard stars, did you specify the magnitude and spectral type of all standard stars ? [NA] Have you included OBs for any calibrations that you need but which are not a part of the Calibration Plan? [Y] [UVES only] Do all your UVES OBs use only the allowed templates listed on the UVES Phase 2 Web pages ? [NA] [ISAAC only] Did you indicate the magnitude of the brightest star in the field for ISAAC imaging observations? [NA] [ISAAC only] If you submitted OBs for standard stars, did you use the provided StandardStar templates? [NA] [FLAMES only] Did you specify the hour angle range for which your Target Setup files are valid ? [NA] [VIMOS only] Did you specify suitable guide stars for all your OBs using Guidecam? [NA] [VIMOS only] Did you check that the chosen guide stars are suitable for all the offset positions and that they do not produce unacceptable vignetting of the field of view? [NA] [MIDI only] Did you indicate for each science star OB the corresponding calibrator star OB name in the ReadMe file as well as in the comments of the OB ? [NA] [MIDI only] If you use calibrator stars which are not in the CalVin database, did you specify their characteristics in the ReadMe file and in the OBs ? [NA] If you answered "NO" to any of these questions, please revise your OBs *before* submission.