README Template 73.1 (please do not delete the README Template Version line!) ESO Programme ID: Principal Investigator Name: Henk Spruit Principal Investigator E-mail Address: henk@mpa-garching.mpg.de Principal Investigator Telephone Number: 089 30000 2220 Principal Investigator Postal Address: MPI f Astro, Postfach 1317, 85741 Garching Instrument: FORS2 OPC Priority Class: A OPC Approved Total Execution Time: 5h Spent so far: 0h Estimated Total Execution Time these OBs (including overheads): 5.0h README File Submission Date: 7/7/2004 Programme Description ===================== General Overview ---------------- This is a program of high-speed optical observations (FORS2 HITI) of the black hole transient X-ray source GX 339-4, coordinated to be simultaneous with X-ray observations with RXTE. - The main goal is to get make optimal use of the time when XTE is observing. For this reason, start of the SCIENCE EXPOSURES is requested within a 5 min window before start of the XTE time, (see below). - Calibrations are not critical (since most of the science will come out of the cross-correlation of the signal with the X-rays.) - Rotator settings vary, since some have been chosen for slit to be close to parallactic angle to minimize slit losses. (This is different from the previous observations in April/May where rotator was set on a fixed comparison star). Approved Waiver Request Summary ------------------------------- Obs > 1hr approved because XTE orbits are longer Critical Observing Condition Constraints ---------------------------------------- Since simultaneity with XTE is overriding for the observations, constraints on sky conditions have been set low. These observations can be done as long as some light gets through the clouds. Time Critical Aspects --------------------- In the `time intervals' fieId of the OB definitions I have set acceptable times (UT, including date!) for the nominal start of the observations (i.e. including the 13 min setup given by the p2pp execution time calculator). The main concern here is not to loose XTE time, i.e. the science exposures should bracket the XTE time. The start of XTE times is given in both the `OD name' and `User comment' fields of the OB definitions. - If setup and acquistion is completed early, please do not start science exposures before first acceptable science start time given in the table below, otherwise XTE time is lost at the end. - For 4 of the 5 OBs, the observing sequence can be terminated at the end of the XTE time, even if the sequence is not yet finished (see below). - The observation on the first night (night starting 9 July) is unfortunately broken up into two shorter segments. This is due to a disruption of the original XTE schedule by a TOO. Sorry for the scheduling inconvenience. NIGHT OF 9 July =============== OB: XTE time Nominal start SETUP Acceptable start of +acquisition SCIENCE EXPOSURES: 339XTE6a 10/7(UT)03:24-03:34 03:05 UT 03:18 - 03:23 UT (sequence can be terminated at: 03:35) 339XTE6b 04:58-05:08 04:39 UT 04:52 - 04:57 UT (sequence can be terminated at: 05:09) NIGHT OF 10 July =============== 339XTE7 11/7(UT) 02:09-03:11 01:43 UT 01:56 - 02:08 Please let run till end (around 03:20) NIGHT OF 11 July =============== 339XTE8 12/7(UT) 03:20-04:24 03:01 UT 03:14 - 03:19 (Can be terminated at: 04:25) NIGHT OF 12 July ================ 339XTE9 13/7(UT) 02:57-04:02 02:38 UT 02:51 - 02:56 (Can be terminated at: 04:03) Special Calibration Information none ------------------------------- ToO Information N/A --------------- Pre-Imaging Requirements N/A ------------------------ Source of preimaging: OB Information ============== List of Science OBs ------------------- (for ISAAC imaging, please indicate the magnitude of the brightest star in the field for each OB) 339XTE6a (Night starting 9 July at Paranal) 339XTE6b (Night starting 9 July at Paranal) 339XTE7 (Night starting 10 July at Paranal) 339XTE8 (Night starting 11 July at Paranal) 339XTE9 (Night starting 12 July at Paranal) Total Number of Submitted Science OBs: 5 List of Calibration OBs with Associated Science OBs N/A --------------------------------------------------- Total Number of Submitted Calibration OBs: 0 OB Compliance Checks ==================== (Y = Yes, N = No, NA = Not Applicable) Do all your OBs comply with the instrument specific requirements listed on the instrument specific Phase 2 Web pages ? [Y] Do all your Finding Charts comply with the both the general and instrument-specific finding chart requirements? [Y] If you submitted OBs for standard stars, did you specify the magnitude and spectral type of all standard stars ? [NA] Have you included OBs for any calibrations that you need but which are not a part of the Calibration Plan? [N] [UVES only] Do all your UVES OBs use only the allowed templates listed on the UVES Phase 2 Web pages ? [Y/N/NA] [ISAAC only] Did you indicate the magnitude of the brightest star in the field for ISAAC imaging observations? [Y/N/NA] [ISAAC only] If you submitted OBs for standard stars, did you use the provided StandardStar templates? [Y/N/NA] [FLAMES only] Did you specify the hour angle range for which your Target Setup files are valid ? [Y/N/NA] [VIMOS only] Did you specify suitable guide stars for all your OBs using Guidecam? [Y/N/NA] [VIMOS only] Did you check that the chosen guide stars are suitable for all the offset positions and that they do not produce unacceptable vignetting of the field of view? [Y/N/NA] [MIDI only] Did you indicate for each science star OB the corresponding calibrator star OB name in the ReadMe file as well as in the comments of the OB ? [Y/N/NA] [MIDI only] If you use calibrator stars which are not in the CalVin database, did you specify their characteristics in the ReadMe file and in the OBs ? [Y/N/NA] If you answered "NO" to any of these questions, please revise your OBs *before* submission.