README Template 72.1 (please do not delete the README Template Version line!) ESO Programme ID:272.A-5035(A) Principal Investigator Name: Claeskens J.-F. Principal Investigator E-mail Address: claesken@astro.ulg.ac.be Principal Investigator Telephone Number: 32-4-366.97.24 Principal Investigator Postal Address: Institut Astrophysique et Geophysique Allee du 6 Aout, 17 B-4000 Sart Tilman Liege, BELGIUM Instrument: FORS1 OPC Priority Class: A OPC Approved Total Execution Time: 0.6h Estimated Total Execution Time (including overheads):35m59s README File Submission Date: Programme Description ===================== General Overview ---------------- This run consists of BVRI imaging of the gravitationally lensed quasar RXJ1131-1231 in one series of observations. The latter must be carried out in simultaneity with Chandra X-ray observations. Because it is important to get the whole gravitational lens system in the same CCD quadrant in order to have a uniform noise behavior (for deconvolution/ PSF subtraction) while including suitable PSF stars in the field, a telescope offset of (-12.5,-30.5) arcsec is given before the first observation. To avoid saturation of the brightest lensed images and of PSF stars in the field while getting a good S/N in the faintest lensed image, 4 short exposures separated by small telescope offsets are taken in each filter. Please note that the observations are in HR mode and need twilight and screen flats in this mode. Approved Waiver Request Summary ------------------------------- Critical Observing Condition Constraints ---------------------------------------- Seeing better than 0.8 arcsec. Time Critical Aspects --------------------- The observations should be carried out as close as possible to Chandra observations (within 3 days). The latter have been postponed and the date is not yet known. It will be communicated to the USG as soon as we get the information from the Chandra team. Good seeing is also required (FWHM <0.8"). However, should the weather conditions be not optimal during the time of Chandra-obs +/- 3 days, the observations should be carried out at the latest one week later, and the seeing should absolutely not be larger than 1". Special Calibration Information ------------------------------- Standard calibration. Please note that the observations are in HR mode and need twilight and screen flats in this mode. ToO Information --------------- Pre-Imaging Requirements ------------------------ No pre-imaging is required for this programme. OB Information ============== List of Science OBs with Associated Finding Charts -------------------------------------------------- Total Number of Submitted Science OBs: 1 rxj1131-BVRI Total Number of Submitted Finding Charts: 1 272.A-5035A.001.ps List of Calibration OBs with Associated Science OBs --------------------------------------------------- Total Number of Submitted Calibration OBs: 0 Phase 2 package Compliance Checks ================================= (Y = Yes, N = No, NA = Not Applicable) Do all your OBs comply with the instrument specific requirements listed on the instrument specific Phase 2 Web pages ? [Y] Do all your Finding Charts comply with the both the general and instrument-specific finding chart requirements? [Y] If you submitted OBs for standard stars, did you specify the magnitude and spectral type of all standard stars ? [NA] Have you included OBs for any calibrations that you need but which are not a part of the Calibration Plan? [NA] [FORS only] Do all your FORS OBs use only the allowed detector read-out modes listed on the FORS1/FORS2 Phase 2 Web pages? [Y] [FORS only] Do all your FORS MOS/LSS OBs contain the mandatory "through-slit image" template? [NA] [UVES only] Do all your UVES OBs use only the allowed templates listed on the UVES Phase 2 Web pages ? [NA] [ISAAC only] Are ALL the objects in your field-of-view fainter than the magnitude limits specified on the ISAAC Phase 2 Web page ? [NA] [ISAAC only] If you submitted OBs for standard stars, did you use the provided ISAAC*_*_cal_* templates? [NA] [FLAMES only] Did you specify the hour angle range for which your Target Setup files are valid ? [NA] [VIMOS only] Did you specify suitable guide stars for all your OBs using Guidecam? [NA] [VIMOS only] Did you check that the chosen guide stars are suitable for all the offset positions and that they do not produce unacceptable vignetting of the field of view? [NA] If you answered "NO" to any of these questions, please revise your OBs *before* submission.