README Template 71.1 (please do not delete the README Template Version line!) ESO Programme ID:271.B-5019(A) Principal Investigator Name:Andreas Eckart Principal Investigator E-mail Address:eckart@ph1.uni-koeln.de Principal Investigator Telephone Number:+49-221-470-3546 Principal Investigator Postal Address: Andreas Eckart University of Cologne Zuelpicherstr.77 50937 Koeln Germany email: eckart@ph1.uni-koeln.de Telefone: work : +49-221-470-3546 Fax : work : +49-221-470-5162 Telefone: private: +49-2238-308861 Instrument:NACO OPC Priority Class:A OPC Approved Total Execution Time:8h=2x4h Estimated Total Execution Time (including overheads): 8h=2x4h README File Submission Date:16.06.2003 Programme Description ===================== If problems occure email to eckart@ph1.uni-koeln.de and rainer@mpe.mpg.de General Overview ---------------- The aim of this observation is a coordinated study of the variability of Sgr A* in the NIR (ESO VLT) and X-ray domaine (Chandra). We suspect the black hole to flare at least once during the total time of 8 hours allocated for this programme. High time resolution (compared to the expected burst duration of several 10 min) and good overall time coverage is required. Therefore NDIT is set to 2 and DIT to 10 in all observations. AO configuration **************** The ~7mag supergiant IRS 7 (6" north of Sgr A*) is used as reference source. Dichroic N20C80. Important: --------- NAOS tries to acquire a background flux before closing the loop. Since this is done by default with a (0,0) offset, the background acquisition will usually fail because the GC is a very crowded field. Even if it does not fail, it will result in a very poor correction. Therefore the background has to be acquired MANUALLY. We found that the offset (+9",-8") works very well. The AO mode is usually 2-1 (set automatically by NAOS). In case of bad seeing, we found that mode 3-2 gives a good correction. Image centering **************** We use generic offsets, imaging the star cluster at 4 positions on the detector (Please see Figure Offsets.ps). As for the centering of the field at start of OB, please see Figure Centering.ps In case the OB has to be aborted because the AO crashes or because of other reasons, execution should be restarted at the beginning of the OB. The target must be re-centered in order to assure accurate offsets. General execution ***************** The provided OBs are all identical. Therefore, acquisition can be skipped when starting a new OB. However, please make sure that the pointing is still correct. First image to be taken by each OB must be centered as in Figure Centering.ps. The OBs consist of two parts: Imaging (16 offsets) and sky (5 offsets, with the last one back on the target in order to close the loop of the AO). IMPORTANT: ---------- Please inform the TIO that a large telescope offset will be required for the sky measurements and guiding could be lost in case an inappropriate guiding star is selected. The large offset is 713" W and 400" N. Execution time of the OBs is 00h 59min. However, in subsequent OBs, acquisition can be skipped, so the execution time will be shorter. Here I have provided 10 OBs of 1 hour duration for the two sessions 19 June 23:00 - 03:00 UT and GC_img_K_S13_generic_10-0 GC_img_K_S13_generic_10-1 GC_img_K_S13_generic_10-2 GC_img_K_S13_generic_10-3 GC_img_K_S13_generic_10-4 20 June 23:00 - 03:00 UT GC_img_K_S13_generic_10-5 GC_img_K_S13_generic_10-6 GC_img_K_S13_generic_10-7 GC_img_K_S13_generic_10-8 GC_img_K_S13_generic_10-9 If - due to the unnecessary acquisition after the first OB (each night;i.e. GC_img_K_S13_generic_10-0 and GC_img_K_S13_generic_10-5) the acquisition may be scipped for subsequent OBs. The OBs should cover the allocated 4 hours on the 19th and 20th of June each. !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Complete and good time coverage is essential. !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Also: the OBs have been set up for 1.0 arcsec seeing. if the seeing is worse or better than that keep observing under all circumstances!!! If the seeing is worse or better please modify the setup files as and if necessary. If no AO correction can be performed then keep observing in direct imaging mode!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Complete and good time coverage is essential. !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! I have submitted as seperate files: the readme file 271.B-5019A.README finding charts containing centering and offsett information Centering: 271.B-5019A.001.ps Offsets : 271.B-5019A.002.ps Approved Waiver Request Summary ------------------------------- Y/N Critical Observing Condition Constraints ---------------------------------------- none Time Critical Aspects --------------------- coordinated Chandra VLT observations !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Complete and good time coverage is essential. !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Special Calibration Information ------------------------------- none ToO Information --------------- Pre-Imaging Requirements ------------------------ OB Information ============== List of Science OBs with Associated Finding Charts -------------------------------------------------- finding charts containing centering and offsett information Centering: 271.B-5019A.001.ps Offsets : 271.B-5019A.002.ps Total Number of Submitted Science OBs:10 Total Number of Submitted Finding Charts:2 List of Calibration OBs with Associated Science OBs --------------------------------------------------- Total Number of Submitted Calibration OBs:0 OB Compliance Checks ==================== (Y = Yes, N = No, NA = Not Applicable) Do all your OBs comply with the instrument specific requirements listed on the instrument specific Phase 2 Web pages ? [Y] If you submitted OBs for standard stars, did you specify the magnitude and spectral type of all standard stars ? [Y] Have you included OBs for any calibrations that you need but which are not a part of the Calibration Plan? [NA] [FORS only] Do all your FORS OBs use only the allowed detector read-out modes listed on the FORS1/FORS2 Phase 2 Web pages? [NA] [FORS only] Do all your FORS MOS/LSS OBs contain the mandatory "through-slit image" template? [NA] [UVES only] Do all your UVES OBs use only the allowed templates listed on the UVES Phase 2 Web pages ? [NA] [ISAAC only] Are ALL the objects in your field-of-view fainter than the magnitude limits specified on the ISAAC Phase 2 Web page ? [NA] [ISAAC only] If you submitted OBs for standard stars, did you use the provided ISAAC*_*_cal_* templates? [NA] [FLAMES only] Did you specify the hour angle range for which your Target Setup files are valid ? [NA] [WFI only]Are your finding charts 34 arcmin x 34 arcmin? [NA] If you answered "NO" to any of these questions, please revise your OBs *before* submission.