README Template 71.1 (please do not delete the README Template Version line!) ESO Programme ID: 271.A-5015(A) Principal Investigator Name: Matt Lehnert Principal Investigator E-mail Address: mlehnert@mpe.mpg.de Principal Investigator Telephone Number: +49-89-30000-3592 Principal Investigator Postal Address: MPE / Giessenbachstrasse 1/ D-85748 Garching b. Muenchen / Germany Instrument: FORS2 OPC Priority Class: B OPC Approved Total Execution Time: 5.0 hours Estimated Total Execution Time (including overheads): 5.0 hours README File Submission Date: 08 July 2003 Programme Description ===================== General Overview ---------------- This is a programme to obtain high resolution spectra of known z>5.4 Lyman break galaxies to determine their emission line profile shapes. A few of the candidates have emission lines that indicate they are at very high redshifts (z>6) which were found by accident. One test to determine their actual redshifts is high resolution spectroscopy which will split the [OII] doublet if the galaxies are actually low redshift [OII] emitters instead of higher redshifts Lyman-alpha emitters. We have only one mask to conduct this test. Approved Waiver Request Summary ------------------------------- We do not have an approved waiver for 271.A-5015(A) but this is an approved DDT. Critical Observing Condition Constraints ---------------------------------------- The critical observing constraints are that the seeing should be better than 0.8" and that the sky should be clear. Time Critical Aspects --------------------- There are no critical aspects to this proposal. Special Calibration Information ------------------------------- We do not require anything beyond the standard calibration. ToO Information --------------- This is not a ToO programme. Pre-Imaging Requirements ------------------------ This program does not require pre-images. OB Information ============== List of Science OBs with Associated Finding Charts -------------------------------------------------- Total Number of Submitted Science OBs: 5 Total Number of Submitted Finding Charts: 5 SeqA.1 = sciMXUBDF1highres01 = 71.A-5015A.001.ps = whole mask image SeqA.2 = sciMXUBDF1highres02 = 71.A-5015A.002.ps = blow up of mask SeqA.3 = sciMXUBDF1highres03 = 71.A-5015A.003.ps = blow up of mask SeqA.4 = sciMXUBDF1highres04 = 71.A-5015A.004.ps = blow up of mask SeqA.5 = sciMXUBDF1highres05 = 71.A-5015A.005.ps = reference star image The finding charts are from deep I-band images (I_AB~26.7) from FORS2. We show both the field with the reference stars marked and a image where the slits are visible. List of Calibration OBs with Associated Science OBs --------------------------------------------------- Total Number of Submitted Calibration OBs: 0 OB Compliance Checks ==================== (Y = Yes, N = No, NA = Not Applicable) Do all your OBs comply with the instrument specific requirements listed on the instrument specific Phase 2 Web pages ? [Y] If you submitted OBs for standard stars, did you specify the magnitude and spectral type of all standard stars ? [NA] Have you included OBs for any calibrations that you need but which are not a part of the Calibration Plan? [NA] [FORS only] Do all your FORS OBs use only the allowed detector read-out modes listed on the FORS1/FORS2 Phase 2 Web pages? [Y] [FORS only] Do all your FORS MOS/LSS OBs contain the mandatory "through-slit image" template? [Y] [UVES only] Do all your UVES OBs use only the allowed templates listed on the UVES Phase 2 Web pages ? [NA] [ISAAC only] Are ALL the objects in your field-of-view fainter than the magnitude limits specified on the ISAAC Phase 2 Web page ? [NA] [ISAAC only] If you submitted OBs for standard stars, did you use the provided StandardStar templates? [NA] [FLAMES only] Did you specify the hour angle range for which your Target Setup files are valid ? [NA] [WFI only]Are your finding charts 34 arcmin x 34 arcmin? [NA] If you answered "NO" to any of these questions, please revise your OBs *before* submission.