README Template 70.1

ESO Programme ID: 170.D-0010(D)
Principal Investigator Name: Norbert Christlieb
Principal Investigator E-mail Address:st4b321@hs.uni-hamburg.de
Principal Investigator Telephone Number:
Instrument: UVES
OPC Priority Class: A
OPC Approved Total Execution Time: 30.0
Estimated Total Execution Time (including overheads): 29.8

README File Submission Date: 27 January 2003

Note: The PI (NC) is currently in Mount Stromlo Observatory, which just burned down, and has 
therefore no regular access to emails. So please CC any email exchanges also to Vanessa.Hill@obspm.fr

Programme Description
=====================

General Overview
----------------
This is the follow-up part of an already executed (170.D-0010(A)) survey 
for r-process enriched stars. High resolution and high signal to noise 
spectra are required for two targets which were selected to have a 
high r-process content.
Both stars are already setting (03h17 and 04h42 respectively) and the 
observations are therefore very urgent. 
Note that The MOST INTERESTING object is HE0315+0000 
(OB names sci_dic2_HE0313p0000_01 to 10 and sci_dic1_HE0313p0000_01 to 08), 
and this object has thus PRIORITY over HE0442-1234 
(OB names sci_dic2_HE0442m1234_01 to 03 and sci_dic1_HE0442m1234_01 to 07).

Waiver Request Summary
----------------------

Critical Observing Condition Constraints
----------------------------------------

Time Critical Aspects
---------------------
Note that The MOST INTERESTING object is HE0315+0000  
and this object has thus HIGHER PRIORITY than HE0442-1234.
Unfortunately, HE0315+0000 is already setting quite fast, and we realise
that some of the OBs might not be observed this period because of lack 
of service mode time before the object is completely inaccessible. 
However, we would still find usefull to have AS MANY OBs as possible 
completed for HE0315+0000 (even if not all).

Special Calibration Information
-------------------------------

ToO Information
---------------

Pre-Imaging Information
-----------------------

OB Information
==============

List of Science OBs with Associated Finding Charts
--------------------------------------------------

Total Number of Submitted Science OBs: 26
Total Number of Submitted Finding Charts: 2

sci_dic2_HE0315p0000-10  = 170.D-0010D.001.ps
sci_dic2_HE0315p0000-09  = 170.D-0010D.001.ps 
sci_dic2_HE0315p0000-08  = 170.D-0010D.001.ps 
sci_dic2_HE0315p0000-07  = 170.D-0010D.001.ps 
sci_dic2_HE0315p0000-06  = 170.D-0010D.001.ps 
sci_dic2_HE0315p0000-05  = 170.D-0010D.001.ps 
sci_dic2_HE0315p0000-04  = 170.D-0010D.001.ps 
sci_dic2_HE0315p0000-03  = 170.D-0010D.001.ps 
sci_dic2_HE0315p0000-02  = 170.D-0010D.001.ps 
sci_dic2_HE0315p0000_01  = 170.D-0010D.001.ps 
sci_dic1_HE0315p0000_08  = 170.D-0010D.001.ps   
sci_dic1_HE0315p0000_07  = 170.D-0010D.001.ps 
sci_dic1_HE0315p0000_06  = 170.D-0010D.001.ps 
sci_dic1_HE0315p0000_05  = 170.D-0010D.001.ps 
sci_dic1_HE0315p0000_04  = 170.D-0010D.001.ps 
sci_dic1_HE0315p0000_03  = 170.D-0010D.001.ps 
sci_dic1_HE0315p0000_02  = 170.D-0010D.001.ps 
sci_dic1_HE0315p0000_01  = 170.D-0010D.001.ps 
sci_dic1_HE0442m1234_05  = 170.D-0010D.002.ps 
sci_dic1_HE0442m1234_04  = 170.D-0010D.002.ps  
sci_dic1_HE0442m1234_03  = 170.D-0010D.002.ps  
sci_dic1_HE0442m1234_02  = 170.D-0010D.002.ps  
sci_dic1_HE0442m1234_01  = 170.D-0010D.002.ps  
sci_dic2_HE0442m1234_03  = 170.D-0010D.002.ps  
sci_dic2_HE0442m1234_02  = 170.D-0010D.002.ps  
sci_dic2_HE0442m1234_01  = 170.D-0010D.002.ps  

List of Calibration OBs with Associated Science OBs
---------------------------------------------------

Total Number of Submitted Calibration OBs: 0

OB Compliance Checks
====================

Y = Yes, N = No, NA = Not Applicable

Do all your OBs comply with the instrument specific requirements 
listed on the instrument specific Phase 2 Web pages [Y/N/NA]? Y

Do all your FORS OBs use only the allowed detector read-out modes 
listed on the FORS1/FORS2 Phase 2 Web pages? [Y/N/NA] NA

Do all your FORS MOS/LSS OBs contain the mandatory "through-slit 
image" template? [Y/N/NA]? NA

Do all your UVES OBs use only the allowed templates listed on the 
UVES Phase 2 Web pages [Y/N/NA]? Y

If you submitted OBs for standard stars, did you specify the magnitude and 
spectral type of all standard stars [Y/N/NA]? NA

[ISAAC only] Are ALL the objects in your field-of-view fainter than the 
magnitude limits specified on the ISAAC Phase 2 Web page [Y/N/NA]? NA

[ISAAC only] If you submitted OBs for standard stars, did you
use the provided StandardStar templates? [Y/N/NA]? NA

If you answered "NO" to any of these questions, please revise your 
OBs *before* submission.