README Template 71.1 (please do not delete the README Template Version line!) ESO Programme ID: 69.A-0458(C) Principal Investigator Name: Franx Principal Investigator E-mail Address: franx@strw.leidenuniv.nl Principal Investigator Telephone Number: +31 71 5275870 Instrument: FORS2 OPC Priority Class: A OPC Approved Total Execution Time: 24 hrs Estimated Total Execution Time (including overheads): 24 hrs README File Submission Date: 14-03-03 Programme Description ===================== General Overview ---------------- This is deep spectroscopy on two cluster fields (CL1252 and MS1054). The objects to be observed are selected on the basis of their broadband colours from ACS/HST images and photometric redshifts, or, if available, spectroscopic redshifts. The objects are early type galaxies in the cluster or in the foreground or background field for which we want to measure the velocity dispersion, by obtaining high signal-to-noise spectra, such that the broadening of the absorption lines can be determined. The 24 hours (including overhead) will be divided among the two fields as follows: 18 hours on CL1252, 6 hours on MS1054. For each field two different masks have been designed, which only differ very slightly. We submit sequences of identical OB's for a given mask. If weather conditions permit, please execute these OB's consecutively without stopping. In this case, the mask alignment can be skipped entirely, [including throughslit imaging]. Please lengthen the exposures by 170 sec to take into account that the overhead is significantly shorter without the acquisition. Our OB's are longer than 1 hour (with permission), out of necessity: we need sequences of 4 for accurate skysubtraction. The first 3 exposures finish within the maximum OB length of 1 hour. If weather conditions get worse during the OB, please remember the following: A series of 2 is of very limited use to us. [because of skysubtraction] A series of 3 is fairly useful, even if the 3rd exposure is not so great. A series of 4 is very useful, even if the 4th exposure is not so great. Hence, please don't cut off a series in the 4th exposure. We will accept a series if the weather conditions deteriate during the 4th exposure. If you plan to cut it off during the 3rd exposure, consider finishing the 3rd one: although the OB will be rejected, at least it will lead to something useful. Our total exposure times are for each mask 1054_mask3: 9960 sec 1054_mask4: 6640 sec 1252_mask7: 17400 sec 1252_mask8: 34800 sec For each mask a set of finding charts has been made, the first showing an overall view of the field, the second and third showing a close-up of the master and slave chips. The boxes for the stars (see below) are marked. IMPORTANT IMPORTANT IMPORTANT IMPORTANT IMPORTANT When we observed these fields at the telescope in March 2003, we found that the mask-alignment procedure is only accurate to 1-2 pixels or so. We need to do better than that, hence we include little boxes in the masks which should be centered exactly on stars in the field if the mask-alignment is good. We measured the offsets by hand, by comparing the position of the star to the center of the "box". We applied additional corrections to the rotator and telescope position. Since not all instrument astronomers are familiar with applying rotation offsets [which is done at the telescope console, not the instrument console], we ask your attention to this aspect. We know that Thomas Szeifert, and Kieran O'Brian have extensive experience, as have others. We found that the corrections for a given mask reproduce well from one acquisition to another, with possibly only very small changes in offset. We expect that the offsets are the same for all masks on MS1054, and all masks for CL1252 - hence there are only 2 sets of corrections to be determined. Please take care in doing this well for the first time. We notice that the additional rotation can be determined in the following way: star in upper starbox displaced by 1 pixel to the right wrt star in lower starbox -> rotate telescope by 0.06 degrees (positive, as entered on the telescope console) [use starboxes in BOTH ccd's !] We found a systematic offset of about 6 arcsec for the ms1054 field in the first acquisition (with the reference stars). If the instrument needs to be rotated by 360 during a sequence, or after a sequence, please ALWAYS take a throughslit image afterwards. We have found offsets of a few pixels after such a procedure. Approved Waiver Request Summary ------------------------------- We have permission to extend the length of the OBs to 1 hour and about 15 minutes. Request submitted: March 6 2003 , Request granted: March 10 2003 [ticket number USG-07062] Critical Observing Condition Constraints ---------------------------------------- Dark sky and clear conditions with <=0.8 seeing are required. Absolute photometric is not necessary. Time Critical Aspects --------------------- Special Calibration Information ------------------------------- Please notice our procedure for accurate mask alignment on the field. Please take a throughslit image AFTER the final alignment has been done. This does not need to be repeated if the same mask is repeated immediately after. If the instrument needs to be rotated by 360 during a sequence, or after a sequence, please ALWAYS take a throughslit image afterwards. We have found offsets of a few pixels after such a procedure. ToO Information --------------- This is not a ToO programme. Pre-Imaging Requirements ------------------------ No pre-imaging is required for this programme. OB Information ============== List of Science OBs with Associated Finding Charts -------------------------------------------------- Total Number of Submitted Science OBs: 20 Total Number of Submitted Finding Charts: 12 sciMXU CL1252_mask7_1 = 169.A-0458C.007.ps , 169.A-0458C.008.ps , 169.A-0458C.009.ps sciMXU CL1252_mask7_2 = 169.A-0458C.007.ps , 169.A-0458C.008.ps , 169.A-0458C.009.ps sciMXU CL1252_mask7_3 = 169.A-0458C.007.ps , 169.A-0458C.008.ps , 169.A-0458C.009.ps sciMXU CL1252_mask7_4 = 169.A-0458C.007.ps , 169.A-0458C.008.ps , 169.A-0458C.009.ps sciMXU CL1252_mask7_5 = 169.A-0458C.007.ps , 169.A-0458C.008.ps , 169.A-0458C.009.ps sciMXU CL1252_mask8_1 = 169.A-0458C.010.ps , 169.A-0458C.011.ps , 169.A-0458C.012.ps sciMXU CL1252_mask8_2 = 169.A-0458C.010.ps , 169.A-0458C.011.ps , 169.A-0458C.012.ps sciMXU CL1252_mask8_3 = 169.A-0458C.010.ps , 169.A-0458C.011.ps , 169.A-0458C.012.ps sciMXU CL1252_mask8_4 = 169.A-0458C.010.ps , 169.A-0458C.011.ps , 169.A-0458C.012.ps sciMXU CL1252_mask8_5 = 169.A-0458C.010.ps , 169.A-0458C.011.ps , 169.A-0458C.012.ps sciMXU CL1252_mask8_6 = 169.A-0458C.010.ps , 169.A-0458C.011.ps , 169.A-0458C.012.ps sciMXU CL1252_mask8_7 = 169.A-0458C.010.ps , 169.A-0458C.011.ps , 169.A-0458C.012.ps sciMXU CL1252_mask8_8 = 169.A-0458C.010.ps , 169.A-0458C.011.ps , 169.A-0458C.012.ps sciMXU CL1252_mask8_9 = 169.A-0458C.010.ps , 169.A-0458C.011.ps , 169.A-0458C.012.ps sciMXU CL1252_mask8_10 = 169.A-0458C.010.ps , 169.A-0458C.011.ps , 169.A-0458C.012.ps sciMXU MS1054_mask3_1 = 169.A-0458C.001.ps , 169.A-0458C.002.ps , 169.A-0458C.003.ps sciMXU MS1054_mask3_2 = 169.A-0458C.001.ps , 169.A-0458C.002.ps , 169.A-0458C.003.ps sciMXU MS1054_mask3_3 = 169.A-0458C.001.ps , 169.A-0458C.002.ps , 169.A-0458C.003.ps sciMXU MS1054_mask4_1 = 169.A-0458C.004.ps , 169.A-0458C.005.ps , 169.A-0458C.006.ps sciMXU MS1054_mask4_2 = 169.A-0458C.004.ps , 169.A-0458C.005.ps , 169.A-0458C.006.ps List of Calibration OBs with Associated Science OBs --------------------------------------------------- Total Number of Submitted Calibration OBs: 0 OB Compliance Checks ==================== (Y = Yes, N = No, NA = Not Applicable) Do all your OBs comply with the instrument specific requirements listed on the instrument specific Phase 2 Web pages ? [Y] If you submitted OBs for standard stars, did you specify the magnitude and spectral type of all standard stars ? [Y] Have you included OBs for any calibrations that you need but which are not a part of the Calibration Plan? [Y] [FORS only] Do all your FORS OBs use only the allowed detector read-out modes listed on the FORS1/FORS2 Phase 2 Web pages? [Y] [FORS only] Do all your FORS MOS/LSS OBs contain the mandatory "through-slit image" template? [Y] [UVES only] Do all your UVES OBs use only the allowed templates listed on the UVES Phase 2 Web pages ? [NA] [ISAAC only] Are ALL the objects in your field-of-view fainter than the magnitude limits specified on the ISAAC Phase 2 Web page ? [NA] [ISAAC only] If you submitted OBs for standard stars, did you use the provided StandardStar templates? [NA] [FLAMES only] Did you specify the hour angle range for which your Target Setup files are valid ? [NA] [WFI only]Are your finding charts 34 arcmin x 34 arcmin? [NA] If you answered "NO" to any of these questions, please revise your OBs *before* submission.