README Template 69.1 ESO Programme ID: 166.A-0106(A) Principal Investigator: Bergeron Contact Person Name: Bergeron Jacqueline Contact Person E-mail Address: jbergero@eso.org Contact Person Telephone Number: +49-89-3200-6228 Instrument: UVES OPC Priority Class: A OPC Approved Total Execution Time: 105 hr for P66 OPC Approved Total Execution Time: 65 hr for P67 (total: 334 hr) Estimated Total Execution Time for P66+P67, including overheads, for all the targets (excluding the 15 OBs not started in P66): 166 hr 55 min OPC Approved Total Execution Time: 99 hr for P68 OPC Approved Total Execution Time: 65 hr for P69 (total: 334 hr) README File Submission Date: Part 1 - 1 September 2000 Part 2 - 25 January 2001 (additional OBs P66/67) Part 3 - 23 March 2001 (remaining OBs/P67) Part 4 - 27 August 2001 (OBs/P68) Part 5 - 20 February 2002 (OBs/P69) Part 1 ****** Programme Description ===================== General Overview ---------------- This is a high resolution, high S/N spectroscopic programme of fairly bright quasars (magnitudes given in the OBs in User Comments): priority 1 targets (5): B(J) from 16.4 to 16.7 or V from 16.0 to 16.5 priority 2 targets (3): B(J) 17.2 or V from 16.9 to 17.5 The scientific goals can only be reached if a high S/N is obtained (40 in DIC1B around 3500A and 100 in DIC2B), thus it is MANDATORY TO FULLY COMPLETE the OBs of a given quasar when started and in good seeing conditions (at most 0.8"). Waiver Request Summary ---------------------- none Critical Observing Condition Constraints ---------------------------------------- seeing of at most 0.8" The moon constraints are (slightly relaxed as compared to the OBs): DIC1 - lunar illumination 0.65 and moon angular distance of 60deg; DIC1 - lunar illumination 0.75 and moon angular distance of 60deg. Time Critical Aspects --------------------- none Special Calibration Information ------------------------------- NA ToO Information --------------- This is not a ToO programme Pre-Imaging Information ----------------------- NA OB Information (Part 1) ============== List of Science OBs with Associated Finding Charts -------------------------------------------------- Total Number of Submitted Science OBs: 49 Total Number of Submitted Finding Charts: 8 As indicated in each finding chart, the area is 1 arcmin square with north to the top and east to the left. The long line in each finding chart ONLY indicates the position of the targets (always at the center of the field). 166.A-0106A.001.ps.gz: HE0001-2340 - priority 1 6 OBs: HE0001_DIC1_346_580_2x2_1 HE0001_DIC1_346_580_2x2_2 HE0001_DIC1_346_580_2x2_3 HE0001_DIC2_437_860_2x2_1 HE0001_DIC2_437_860_2x2_2 HE0001_DIC2_437_860_2x2_3 166.A-0106A.002.ps.gz: Q0109-3518 - priority 1 6 OBs: Q0109_DIC1_346_580_2x2_1 Q0109_DIC1_346_580_2x2_2 Q0109_DIC1_346_580_2x2_3 Q0109_DIC2_437_860_2x2_1 Q0109_DIC2_437_860_2x2_2 Q0109_DIC2_437_860_2x2_3 166.A-0106A.003.ps.gz: Q0122-380 - priority 1 6 OBs: Q0122_DIC1_346_580_2x2_1 Q0122_DIC1_346_580_2x2_2 Q0122_DIC1_346_580_2x2_3 Q0122_DIC2_437_860_2x2_1 Q0122_DIC2_437_860_2x2_2 Q0122_DIC2_437_860_2x2_3 166.A-0106A.004.ps.gz: Q0329-385 - priority 2 6 OBs: Q0329_DIC1_346_580_2x2_1 Q0329_DIC1_346_580_2x2_2 Q0329_DIC1_346_580_2x2_3 Q0329_DIC2_437_860_2x2_1 Q0329_DIC2_437_860_2x2_2 Q0329_DIC2_437_860_2x2_3 166.A-0106A.005.ps.gz: HE2217-2818 - priority 1 3 OBs: HE2217-_DIC2_437_860_2x2_1 HE2217-_DIC2_437_860_2x2_2 HE2217-_DIC2_437_860_2x2_3 166.A-0106A.006.ps.gz: HE0151-4326 - priority 2 6 OBs: HE0151_DIC1_346_580_2x2_1 HE0151_DIC1_346_580_2x2_2 HE0151_DIC1_346_580_2x2_3 HE0151_DIC2_437_860_2x2_1 HE0151_DIC2_437_860_2x2_2 HE0151_DIC2_437_860_2x2_3 166.A-0106A.007.ps.gz: PKS0329-255 - priority 2 10 OBs: PKS0329_DIC1_346_580_2x2_1 PKS0329_DIC1_346_580_2x2_2 PKS0329_DIC1_346_580_2x2_3 PKS0329_DIC1_346_580_2x2_4 PKS0329_DIC1_346_580_2x2_5 PKS0329_DIC2_437_860_2x2_1 PKS0329_DIC2_437_860_2x2_2 PKS0329_DIC2_437_860_2x2_3 PKS0329_DIC2_437_860_2x2_4 PKS0329_DIC2_437_860_2x2_5 166.A-0106A.008.ps.gz: HE2347-4342 - priority 1 6 OBs: HE2347_DIC1_346_580_2x2_1 HE2347_DIC1_346_580_2x2_2 HE2347_DIC1_346_580_2x2_3 HE2347_DIC2_437_860_2x2_1 HE2347_DIC2_437_860_2x2_2 HE2347_DIC2_437_860_2x2_3 List of Calibration OBs with Associated Science OBs --------------------------------------------------- Total Number of Submitted Calibration OBs: none - standard calibrations OB Compliance Checks ==================== Y = Yes, N = No, NA = Not Applicable Do all your OBs comply with the instrument specific requirements listed on the instrument specific Phase 2 Web pages ? Y Do all your FORS OBs use only the allowed detector read-out modes listed on the FORS1/FORS2 Phase 2 Web pages? NA Do all your FORS MOS/LSS OBs contain the mandatory "through-slit image" template? NA Did you submit the mandatory calibration OBs for each FORS MOS mask setup ? NA Do all your UVES OBs use only the allowed templates listed on the UVES Phase 2 Web pages ? Y If you submitted OBs for standard stars, did you specify the magnitude and spectral type of all standard stars ? NA [ISAAC only] Are ALL the objects in your field-of-view fainter than the magnitude limits specified on the ISAAC Phase 2 Web page ? NA [ISAAC only] If you submitted OBs for standard stars, did you use the provided StandardStar templates? NA If you answered "NO" to any of these questions, please revise your OBs *before* submission. Destination Address for Data Products ===================================== J. Bergeron ESO Karl-Schwarzschild-Str 2 D-85748 Garching GERMANY Part 2 ****** OB Information (Part 2) ============== List of Science OBs with Associated Finding Charts -------------------------------------------------- Additional OBs for the end of P66 and beginning of P67 (alpha between 9 and 15 hr [and in fact to 20 hr as the next possible target for this LP is at alpha 20 03 -32]) Total Number of Submitted Science OBs: 27 Total Number of Submitted Finding Charts: 5 As indicated in each finding chart, the area is 1 arcmin square with north to the top and east to the left. The object (marked) is always at the center of the field. 166.A-0106A.009.ps.gz: HE0940-1050 - priority 1 4 OBs: HE0940_DIC1_346_580_2x2_1 HE0940_DIC1_346_580_2x2_2 HE0940_DIC2_437_860_2x2_1 HE0940_DIC2_437_860_2x2_2 166.A-0106A.010.ps.gz: HE1341-1020 - priority 2 8 OBs: HE1341_DIC1_346_580_2x2_1 HE1341_DIC1_346_580_2x2_2 HE1341_DIC1_346_580_2x2_3 HE1341_DIC1_346_580_2x2_4 HE1341_DIC2_437_860_2x2_1 HE1341_DIC2_437_860_2x2_2 HE1341_DIC2_437_860_2x2_3 HE1341_DIC2_437_860_2x2_4 166.A-0106A.011.ps.gz: HE1347-2457 - priority 1 5 OBs: HE1347_DIC1_346_580_2x2_1 HE1347_DIC1_346_580_2x2_2 HE1347_DIC1_346_580_2x2_3 HE1347_DIC2_437_860_2x2_1 HE1347_DIC2_437_860_2x2_2 1 166.A-0106A.012.ps.gz: PKS1448-232 - priority 1 6 OBs: PKS1448_DIC1_346_580_2x2_1 PKS1448_DIC1_346_580_2x2_2 PKS1448_DIC1_346_580_2x2_3 PKS1448_DIC2_437_860_2x2_1 PKS1448_DIC2_437_860_2x2_2 PKS1448_DIC2_437_860_2x2_3 166.A-0106A.013.ps.gz: Q1451-15 - priority 1 Note: finding chart from DSS2-red, object NOT VISIBLE on DSS1 I=17.3, R=19.1, B>~22 (z=4.8 QSO) 4 OBs: Q1451_DIC2_437_860_2x2_1 Q1451_DIC2_437_860_2x2_2 Q1451_DIC2_437_860_2x2_3 Q1451_DIC2_437_860_2x2_4 List of Calibration OBs with Associated Science OBs --------------------------------------------------- Total Number of Submitted Calibration OBs: none - standard calibrations OB Compliance Checks ==================== Y = Yes, N = No, NA = Not Applicable Do all your OBs comply with the instrument specific requirements listed on the instrument specific Phase 2 Web pages ? Y Do all your FORS OBs use only the allowed detector read-out modes listed on the FORS1/FORS2 Phase 2 Web pages? NA Do all your FORS MOS/LSS OBs contain the mandatory "through-slit image" template? NA Did you submit the mandatory calibration OBs for each FORS MOS mask setup ? NA Do all your UVES OBs use only the allowed templates listed on the UVES Phase 2 Web pages ? Y If you submitted OBs for standard stars, did you specify the magnitude and spectral type of all standard stars ? NA [ISAAC only] Are ALL the objects in your field-of-view fainter than the magnitude limits specified on the ISAAC Phase 2 Web page ? NA [ISAAC only] If you submitted OBs for standard stars, did you use the provided StandardStar templates? NA If you answered "NO" to any of these questions, please revise your OBs *before* submission. Part 3 ****** OB Information (Part 3) ============== List of Science OBs with Associated Finding Charts -------------------------------------------------- Additional OBs for the end of P67 (alpha between 15 [in fact 21 hr] and 01 hr) Total Number of Submitted Science OBs: 22 with attached wavelength calibration (1 exposure) Total Number of Submitted Finding Charts: 3 of which one already in for P66 As indicated in each finding chart, the area is 1 arcmin square with north to the top and east to the left. The object (marked) is always at the center of the field. 166.A-0106A.014.ps.gz: PKS2126-158 - priority 1 8 OBs: PKS2116_DIC1_390_464_2x2_1 PKS2116_DIC1_390_564_2x2_2 PKS2116_DIC1_390_564_2x2_3 PKS2116_DIC1_390_564_2x2_4 ("PKS2116_DIC1_390_464_" should read "PKS2126_DIC1_390_464_") PKS2126_DIC2_437_860_2x2_1 PKS2126_DIC2_437_860_2x2_2 PKS2126_DIC2_437_860_2x2_3 PKS2126_DIC2_437_860_2x2_4 166.A-0106A.001.ps.gz: HE0001-2340 - priority 1 (not done in P66, although also then priority 1) 6 OBs: HE0001_DIC1_346_580_2x2_1 HE0001_DIC1_346_580_2x2_2 HE0001_DIC1_346_580_2x2_3 HE0001_DIC2_437_860_2x2_1 HE0001_DIC2_437_860_2x2_2 HE0001_DIC2_437_860_2x2_3 166.A-0106A.015.ps.gz: Q0002-422 - priority 2 8 OBs: Q0002_DIC1_346_580_2x2_1 Q0002_DIC1_346_580_2x2_2 Q0002_DIC1_346_580_2x2_3 Q0002_DIC1_346_580_2x2_4 Q0002_DIC2_437_860_2x2_1 Q0002_DIC2_437_860_2x2_2 Q0002_DIC2_437_860_2x2_3 Q0002_DIC2_437_860_2x2_4 List of Calibration OBs with Associated Science OBs --------------------------------------------------- Total Number of Submitted Calibration OBs: none - standard calibrations OB Compliance Checks ==================== Y = Yes, N = No, NA = Not Applicable Do all your OBs comply with the instrument specific requirements listed on the instrument specific Phase 2 Web pages ? Y Do all your FORS OBs use only the allowed detector read-out modes listed on the FORS1/FORS2 Phase 2 Web pages? NA Do all your FORS MOS/LSS OBs contain the mandatory "through-slit image" template? NA Did you submit the mandatory calibration OBs for each FORS MOS mask setup ? NA Do all your UVES OBs use only the allowed templates listed on the UVES Phase 2 Web pages ? Y If you submitted OBs for standard stars, did you specify the magnitude and spectral type of all standard stars ? NA [ISAAC only] Are ALL the objects in your field-of-view fainter than the magnitude limits specified on the ISAAC Phase 2 Web page ? NA [ISAAC only] If you submitted OBs for standard stars, did you use the provided StandardStar templates? NA If you answered "NO" to any of these questions, please revise your OBs *before* submission. Part 4 ****** OB Information (Part 4) ============== List of Science OBs with Associated Finding Charts -------------------------------------------------- OBs for P68 (including 2 targets submitted for P66 but not observed, with new OBs given below [acq+science+wavecal]) Total Number of Submitted Science OBs: 60 with attached wavelength calibration (1 exposure) Total Number of Submitted Finding Charts: 8 of which two already in for P66 As indicated in each finding chart, the area is 1 arcmin square with north to the top and east to the left. The object (marked) is always at the center of the field. 166.A-0106A.002.ps.gz: Q0109-3518 - priority 1 6 OBs: Q0109_DIC1_346_580_2x2_1 Q0109_DIC1_346_580_2x2_2 Q0109_DIC1_346_580_2x2_3 Q0109_DIC2_437_860_2x2_1 Q0109_DIC2_437_860_2x2_2 Q0109_DIC2_437_860_2x2_3 166.A-0106A.006.ps.gz: HE0151-4326 - priority 2 8 OBs: HE0151_DIC1_346_580_2x2_1 HE0151_DIC1_346_580_2x2_2 HE0151_DIC1_346_580_2x2_3 HE0151_DIC1_346_580_2x2_4 HE0151_DIC2_437_860_2x2_1 HE0151_DIC2_437_860_2x2_2 HE0151_DIC2_437_860_2x2_3 HE0151_DIC2_437_860_2x2_4 166.A-0106A.016.ps.gz: PKS0237-23 - priority 1 6 OBs: PKS0237_DIC1_346_580_2x2_1 PKS0237_DIC1_346_580_2x2_2 PKS0237_DIC1_346_580_2x2_3 PKS0237_DIC2_437_860_2x2_1 PKS0237_DIC2_437_860_2x2_2 PKS0237_DIC2_437_860_2x2_3 166.A-0106A.018.ps.gz: Q0420-388 - priority 1 8 OBs: Q0420_DIC1_390_564_2x2_1 Q0420_DIC1_390_564_2x2_2 Q0420_DIC1_390_564_2x2_3 Q0420_DIC1_390_564_2x2_4 Q0420_DIC2_437_860_2x2_1 Q0420_DIC2_437_860_2x2_2 Q0420_DIC2_437_860_2x2_3 Q0420_DIC2_437_860_2x2_4 166.A-0106A.017.ps.gz: Q0453-423 - priority 1 8 OBs: Q0453_DIC1_346_580_2x2_1 Q0453_DIC1_346_580_2x2_2 Q0453_DIC1_346_580_2x2_3 Q0453_DIC1_346_580_2x2_4 Q0453_DIC2_437_860_2x2_1 Q0453_DIC2_437_860_2x2_2 Q0453_DIC2_437_860_2x2_3 Q0453_DIC2_437_860_2x2_4 166.A-0106A.021.ps.gz: HE1158-1843 - priority 2 6 OBs: HE1158_DIC1_346_580_2x2_1 HE1158_DIC1_346_580_2x2_2 HE1158_DIC1_346_580_2x2_3 HE1158_DIC2_437_860_2x2_1 HE1158_DIC2_437_860_2x2_2 HE1158_DIC2_437_860_2x2_3 166.A-0106A.020.ps.gz: BR1202-0725 - priority 1 red object: no flux below 5000A 10 OBs: BR1202_RED_580_2x2_1 BR1202_RED_580_2x2_2 BR1202_RED_580_2x2_3 BR1202_RED_580_2x2_4 BR1202_RED_580_2x2_5 BR1202_RED_860_2x2_1 BR1202_RED_860_2x2_2 BR1202_RED_860_2x2_3 BR1202_RED_860_2x2_4 BR1202_RED_860_2x2_5 166.A-0106A.019.ps.gz: PKS2000-330 - priority 1 8 OBs: PKS2000_DIC1_390_564_2x2_1 PKS2000_DIC1_390_564_2x2_2 PKS2000_DIC1_390_564_2x2_3 PKS2000_DIC1_390_564_2x2_4 PKS2000_DIC1_437_860_2x2_1 PKS2000_DIC1_437_860_2x2_2 PKS2000_DIC1_437_860_2x2_3 PKS2000_DIC1_437_860_2x2_4 List of Calibration OBs with Associated Science OBs --------------------------------------------------- Total Number of Submitted Calibration OBs: none - standard calibrations OB Compliance Checks ==================== Y = Yes, N = No, NA = Not Applicable Do all your OBs comply with the instrument specific requirements listed on the instrument specific Phase 2 Web pages ? Y Do all your FORS OBs use only the allowed detector read-out modes listed on the FORS1/FORS2 Phase 2 Web pages? NA Do all your FORS MOS/LSS OBs contain the mandatory "through-slit image" template? NA Did you submit the mandatory calibration OBs for each FORS MOS mask setup ? NA Do all your UVES OBs use only the allowed templates listed on the UVES Phase 2 Web pages ? Y If you submitted OBs for standard stars, did you specify the magnitude and spectral type of all standard stars ? NA [ISAAC only] Are ALL the objects in your field-of-view fainter than the magnitude limits specified on the ISAAC Phase 2 Web page ? NA [ISAAC only] If you submitted OBs for standard stars, did you use the provided StandardStar templates? NA If you answered "NO" to any of these questions, please revise your OBs *before* submission. Part 5 ****** OB Information (Part 5) ============== List of Science OBs with Associated Finding Charts -------------------------------------------------- Given below [acq+science+wavecal]: OBs for P69, including 1 target submitted for P68 but not observed, plus new OBs, including targets already observed in previous periods for which additional observations are needed to get a higher S/N in the UV. All the OBs similar to those already in the ESO Database were given a different name. Total Number of Submitted Science OBs: 30 each with attached wavelength calibration (1 exposure) Total Number of Submitted Finding Charts: 6 all already in the ESO Database As indicated in each finding chart, the area is 1 arcmin square with north to the top and east to the left. The object (marked) is always at the center of the field. 166.A-0106A.013.ps.gz: Q1451-15 - priority 1 Note: finding chart from DSS2-red, object NOT VISIBLE on DSS1 I=17.3, R=19.1, B>~22 (z=4.8 QSO) 5 OBs: Q1451_RED_580_2x2_1 Q1451_RED_580_2x2_2 Q1451_RED_580_2x2_3 Q1451_RED_580_2x2_4 Q1451_RED_580_2x2_5 166.A-0106A.019.ps.gz: PKS2000-330 - priority 1 8 OBs: PKS2000_DIC1_390_564_2x2_N1 PKS2000_DIC1_390_564_2x2_N2 PKS2000_DIC1_390_564_2x2_N3 PKS2000_DIC1_390_564_2x2_N4 PKS2000_DIC1_437_860_2x2_N1 PKS2000_DIC1_437_860_2x2_N2 PKS2000_DIC1_437_860_2x2_N3 PKS2000_DIC1_437_860_2x2_N4 166.A-0106A.014.ps.gz: PKS2126-158 - priority 2 4 OBs: PKS2126_DIC1_390_464_2x2_N1 PKS2126_DIC1_390_464_2x2_N2 PKS2126_DIC1_390_464_2x2_N3 PKS2126_DIC1_390_464_2x2_N4 166.A-0106A.005.ps.gz: HE2217-2818 - priority 1 3 OBs: HE2217_DIC1_346_580_2x2_1 HE2217_DIC1_346_580_2x2_2 HE2217_DIC1_346_580_2x2_3 166.A-0106A.015.ps.gz: Q0002-422 - priority 1 4 OBs: Q0002_DIC1_346_580_2x2_N1 Q0002_DIC1_346_580_2x2_N2 Q0002_DIC1_346_580_2x2_N3 Q0002_DIC1_346_580_2x2_N4 166.A-0106A.016.ps.gz: PKS0237-23 - priority 2 Note: the DIC1 observations are of higher priority than those with the DIC2 6 OBs: PKS0237_DIC1_346_580_2x2_N1 PKS0237_DIC1_346_580_2x2_N2 PKS0237_DIC1_346_580_2x2_N3 PKS0237_DIC2_437_860_2x2_N1 PKS0237_DIC2_437_860_2x2_N2 PKS0237_DIC2_437_860_2x2_N3 List of Calibration OBs with Associated Science OBs --------------------------------------------------- Total Number of Submitted Calibration OBs: none - standard calibrations OB Compliance Checks ==================== Y = Yes, N = No, NA = Not Applicable Do all your OBs comply with the instrument specific requirements listed on the instrument specific Phase 2 Web pages ? Y Do all your FORS OBs use only the allowed detector read-out modes listed on the FORS1/FORS2 Phase 2 Web pages? NA Do all your FORS MOS/LSS OBs contain the mandatory "through-slit image" template? NA Did you submit the mandatory calibration OBs for each FORS MOS mask setup ? NA Do all your UVES OBs use only the allowed templates listed on the UVES Phase 2 Web pages ? Y If you submitted OBs for standard stars, did you specify the magnitude and spectral type of all standard stars ? NA [ISAAC only] Are ALL the objects in your field-of-view fainter than the magnitude limits specified on the ISAAC Phase 2 Web page ? NA [ISAAC only] If you submitted OBs for standard stars, did you use the provided StandardStar templates? NA If you answered "NO" to any of these questions, please revise your OBs *before* submission. Destination Address for Data Products ===================================== J. Bergeron Institut d'Astrophysique de Paris 98bis Boulevard Arago F-75014 Paris France