README Template 74.1 (please do not delete the README Template Version line!) ESO Programme ID: 074.D-0367(A) Principal Investigator Name: M.T. Ruiz Principal Investigator E-mail Address: mtruiz@das.uchile.cl Principal Investigator Telephone Number: +56 2 229 4002 Principal Investigator Postal Address: Universidad de Chile, Camino El Observatorio #1515, Las Condes, Chile Instrument: NACO OPC Priority Class: A (chilean) OPC Approved Total Execution Time: 2 hours Estimated Total Execution Time (including overheads): 01:56:43 README File Submission Date: 22 Septembre 2004 Programme Description ===================== General Overview ---------------- Confirmation of a very cool double degenerate system in the Galactic Halo: We aim to detect either a binary or a disk extremely close to our science target (<< 1"). The success of this project depends only on the AO correction, so don't do it if the seeing is not as required ! Special remark for Ks OB acquisition & observation (CE_51_Ks): *********************************************************** First center the reference star into the WFS, using the S54 objective & Ks filter. Then the telescope will offset and the science object will show. Just try to center it at the center of CONICA (in S13), and start. We use the S13 objective to try to resolve a very close binary. Since the science object is faint we put a very long DIT, on purpose. Don't change it ! Special remark for Lp OB acquisition & observation (CE_51_Lp): *********************************************************** The reference star for AO is very red in J,H,K, and should be visible in Lp. If something bright falls into the WFS, then this is it, just do nothing and close the loop (there are no so many red stars in the field). If (bad luck) you have to center it into the WFS and see it in CONICA, that's easy. If you see nothing in CONICA, then put the visible dichroic and filter Ks, center the reference star into the Field Selector box, then put back the JHK dichroic and the Lp filter (it should appear into the WFS), and close the AO loop. Later the telescope will offset to the science object. You may not see it ! So just start the OB and let it run, no need to try a better centering. On the pipeline reduced image you may see a disk. This is what we look at... Approved Waiver Request Summary ------------------------------- We asked to observe in Lp filter instead of J. (WaiverID: 074.D-0367A.01.WAV) Granted August 11th, by F. Comeron. Critical Observing Condition Constraints ---------------------------------------- The seeing is critical for this program. We asked for 0.4" (in Ks), so a seeing in the visible <~0.5" is acceptable, under clear conditions. We put a moon distance of 50 degrees (for Ks) since the reference is faint and we use the visible WFS for this OB. Time Critical Aspects --------------------- Special Calibration Information ------------------------------- A photometric standard from the calibration plan is enough, but don't forget that we observe in Ks+S13+visible, and Lp+L27+dichroic JHK. We also need flat field. ToO Information --------------- Pre-Imaging Requirements ------------------------ OB Information ============== List of Science OBs ------------------- CE_51_Ks (using visible WFS) CE_51_Lp (using IR WFS with dichroic JHK) Total Number of Submitted Science OBs: 2 List of Calibration OBs with Associated Science OBs --------------------------------------------------- Total Number of Submitted Calibration OBs: 0 OB Compliance Checks ==================== (Y = Yes, N = No, NA = Not Applicable) Do all your OBs comply with the instrument specific requirements listed on the instrument specific Phase 2 Web pages ? [Y] Do all your Finding Charts comply with the both the general and instrument-specific finding chart requirements? [Y] If you submitted OBs for standard stars, did you specify the magnitude and spectral type of all standard stars ? [NA] Have you included OBs for any calibrations that you need but which are not a part of the Calibration Plan? [N] [UVES only] Do all your UVES OBs use only the allowed templates listed on the UVES Phase 2 Web pages ? [NA] [ISAAC only] Did you indicate the magnitude of the brightest star in the field for ISAAC imaging observations? [NA] [ISAAC only] If you submitted OBs for standard stars, did you use the provided StandardStar templates? [NA] [FLAMES only] Did you specify the hour angle range for which your Target Setup files are valid ? [NA] [FLAMES only] Did you specify the S/N ratio (at some reference wavelength and per single exposure) you expect to reach with these observations? [NA] [VIMOS only] Did you specify suitable guide stars for all your OBs using Guidecam? [NA] [VIMOS only] Did you check that the chosen guide stars are suitable for all the offset positions and that they do not produce unacceptable vignetting of the field of view? [NA] [MIDI only] Did you indicate for each science star OB the corresponding calibrator star OB name in the ReadMe file as well as in the comments of the OB ? [NA] [MIDI only] If you use calibrator stars which are not in the CalVin database, did you specify their characteristics in the ReadMe file and in the OBs ? [NA] If you answered "NO" to any of these questions, please revise your OBs *before* submission.