README Template 74.1 (please do not delete the README Template Version line!) ESO Programme ID: 074.A-0563B Principal Investigator Name: Georges Meylan Principal Investigator E-mail Address: georges.meylan@epfl.ch Principal Investigator Telephone Number: 41 22 379 24 25 Principal Investigator Postal Address: Laboratoire d'Astrophysique, Ecole Polytechnique Federale de Lausanne, Observatoire, 1290 Chavannes-des-Bois, Switzerland. Instrument: FORS1 OPC Priority Class: B OPC Approved Total Execution Time: 18.0 h Estimated Total Execution Time (including overheads): 15.2 h README File Submission Date: last on 14 Dec. 2004 !!! Updated on 26 Jan. 2005 !!! Programme Description ===================== General Overview ---------------- THE PRESENT PHASE II ARE ONLY PART OF A LARGER PROGRAM. MORE OBS WILL BE SENT AS NEW PRE-IMAGING (074.A-0563A) BECOMES AVAILABLE. The goal of the project is to measure the redshift of the lensing galaxy in gravitationally lensed quasars that are being photometrically monitoring at smaller telescopes in view of measuring Ho. For each object one MOS slit is placed on the target, and as many as possible of the other slits are placed on PSF stars that are very important for further (spatial) deconvolution of the spectra. Additional slits are used as "sky" slits or are placed on secondary lens galaxies. Note that: 1- The quasar images are *NOT* necessarily well centered in the slit. This is done on purpose, and needed for the deconvolution to work well. All PSFs, however, must be centered in the slits (i.e., they can be used to see whether the mask is well aligned, on the contrary to the quasar images). 2- Wide slits are sometimes used even if good seeing is required. This unconventional strategy is again adapted to spatial deconvolution of the spectra and needs well resolved objects within a wide slit. 3- Most masks use the HR collimator, i.e., the prefered sampling. However, some OBs use the LR collimator in order to have a wider field of view and to pick up PSF stars that would not fall within the HR field of view. 4- Each object is observed for 3 h 15 min including overheads (excepted J0924) This is the minimum observing time required to extract any useful information from the data. It is therefore better to finish an object completely before starting a new one. Special remarks: 2 objects added on 26 Jan. 2005 (Q1355 and J1335). 4 objects removed on 26 Jan. 2005, because they are not visible anymore (WFI2026, WFI2033, HE0047 and Q1017) !!! Our first priority is to finish the OBs of HE0230 and J0924. Next comes Q1355 and then J1335. !!! Approved Waiver Request Summary ------------------------------- Critical Observing Condition Constraints ---------------------------------------- Time Critical Aspects --------------------- Special Calibration Information ------------------------------- ToO Information --------------- This is not a ToO programme. Pre-Imaging Requirements ------------------------ The pre-imaging for this program is still going on: 074.A-0563(A). OB Information ============== List of Science OBs ------------------- (for ISAAC imaging, please indicate the magnitude of the brightest star in the field for each OB) HE0230_shot01 HE0230_shot02 HE0230_shot03 J0924_shot01 J0924_shot02 Q1355-shot01 Q1355-shot02 Q1355-shot03 J1335_shot01 J1335_shot02 J1335_shot03 HE0435_shot01 HE0435_shot02 HE0435_shot03 Total Number of Submitted Science OBs: 14 List of Calibration OBs with Associated Science OBs --------------------------------------------------- Total Number of Submitted Calibration OBs: 0 OB Compliance Checks ==================== (Y = Yes, N = No, NA = Not Applicable) Do all your OBs comply with the instrument specific requirements listed on the instrument specific Phase 2 Web pages ? [Y] Do all your Finding Charts comply with the both the general and instrument-specific finding chart requirements? [Y] If you submitted OBs for standard stars, did you specify the magnitude and spectral type of all standard stars ? [Y] Have you included OBs for any calibrations that you need but which are not a part of the Calibration Plan? [Y] [FORS only] Do all your FORS OBs use only the allowed detector read-out modes listed on the FORS1/FORS2 Phase 2 Web pages? [Y] [FORS only] Do all your FORS MOS/LSS OBs contain the mandatory "through-slit image" template? [Y] [UVES only] Do all your UVES OBs use only the allowed templates listed on the UVES Phase 2 Web pages ? [NA] [ISAAC only] Did you indicate the magnitude of the brightest star in the field for ISAAC imaging observations? [NA] [ISAAC only] If you submitted OBs for standard stars, did you use the provided StandardStar templates? [NA] [FLAMES only] Did you specify the hour angle range for which your Target Setup files are valid ? [NA] [FLAMES only] Did you specify the S/N ratio (at some reference wavelength and per single exposure) you expect to reach with these observations? [NA] [VIMOS only] Did you specify suitable guide stars for all your OBs using Guidecam? [NA] [VIMOS only] Did you check that the chosen guide stars are suitable for all the offset positions and that they do not produce unacceptable vignetting of the field of view? [NA] If you answered "NO" to any of these questions, please revise your OBs *before* submission.