README Template 74.1 (please do not delete the README Template Version line!) ESO Programme ID: 074.A-0496A Principal Investigator Name: Andrew Bunker Principal Investigator E-mail Address: bunker@astro.ex.ac.uk Principal Investigator Telephone Number: +44-1392-264118, cell phone +44-7855657106 Principal Investigator Postal Address: School of Physics, University of Exeter, Stocker Road, Exeter EX44QL, UK Instrument: FORS2 OPC Priority Class: B OPC Approved Total Execution Time: 26 hours Estimated Total Execution Time (including overheads): 26 hours README File Submission Date: 16 February 2005 (update to second version of04 September 2004 first version dated 26 August 2004,and second version 28 August 2004) Programme Description ===================== We are observing candidate z=6 high redshift star forming galaxies, selected as being i-band drop outs in the Hubble Ultra Deep Field and the surrounding HST/ACS GOODS imaging of Chandra Deep Field South. Following a report from Dr. Mario van den Ancker, (ESO - User Support Department.) that the first mask (BunkerUDFm1) had some problems with guiding due to lack of bright stars in the field, we tightened the seeing requirement from 1.0arcsec to 0.8arcsec to minimize slit losses (as recommended). This affects OBs 176354-1176365 As requested in the feedback from our original Phase II, the moon phase requirement has been set to "Any", and some brighter objects now appear on the mask for fine-alignment. General Overview ---------------- We are using FORS2 spectroscopy to look for Lyman-alpha emission redshifted into the I-band. We used moderately high spectral resolution (R~2500 with the GRIS_1028z+29) to look for the characteristic red-wing asymmetry of this line. The galaxies are very faint (z'~27-28mag) so will not be visible in the acquisition image (and we do not expect to detect continuum emission). We are looking for line emission. As requested in the feedback on our original Phase II we have added some brighter objects to the slit mask to help with the fine centering. These are in square 2"x2" or 3"x3" boxes (our real targets are in 1"-wide slits with >6" length) and the coordinates of these brighter objects are: In mask1 (now design 78 - mxu2.78.autopos.epsf mxu2.78.autopos.p_targ etc.) there are 6 brighter objects, all with 2"x2" boxes INS.TARG160.ALPHA 033232.722 INS.TARG160.DELTA -274859.640 INS.TARG161.ALPHA 033245.110 INS.TARG161.DELTA -274724.190 INS.TARG162.ALPHA 033238.497 INS.TARG162.DELTA -274702.630 INS.TARG163.ALPHA 033232.709 INS.TARG163.DELTA -274547.490 INS.TARG164.ALPHA 033236.302 INS.TARG164.DELTA -274459.630 INS.TARG165.ALPHA 033233.512 INS.TARG165.DELTA -274623.340 In mask2 (now design 77 - mxu2.77.autopos.epsf mxu2.77.autopos.p_targ etc.) there are 5 brighter sources for alignment (2 with 3"x3" boxes, 3 with 2"x2" boxes) INS.TARG160.WID 2.0 INS.TARG160.LEN 2.0 INS.TARG160.ALPHA 033245.068 INS.TARG160.DELTA -274621.190 INS.TARG161.WID 2.0 INS.TARG161.LEN 2.0 INS.TARG161.ALPHA 033241.402 INS.TARG161.DELTA -274717.160 INS.TARG162.WID 3.0 INS.TARG162.LEN 3.0 INS.TARG162.ALPHA 033245.071 INS.TARG162.DELTA -274738.820 INS.TARG163.WID 3.0 INS.TARG163.LEN 3.0 INS.TARG163.ALPHA 033229.969 INS.TARG163.DELTA -274839.400 INS.TARG164.WID 2.0 INS.TARG164.LEN 2.0 INS.TARG164.ALPHA 033244.303 INS.TARG164.DELTA -275009.720 Approved Waiver Request Summary ------------------------------- Critical Observing Condition Constraints ---------------------------------------- The seeing should be <1arcsec as this is our slit width, and for mask 1 the seeing should be <0.8arcsec (as the lack of bright guide stars produces a poorer PSF). For the acquisition images, we now have the I-band filter in, as this is the wavelength of interest for the spectroscopy, and we want to centre the mask using the same atmospheric dispersion as the wavelengths of interest in the spectroscopy. For the actual spectroscopy, we then switch to the order-blocking OG590 filter for slightly larger wavelength coverage and higher through-put than the I-band filter. Please advise whether this change of filter is the correct procedure to ensure we are well centered on the object centres at ~8000Ang. Time Critical Aspects --------------------- Special Calibration Information ------------------------------- We would like flat-fields and arc lamps through our two masks - which apparently is standard calibration and we do not need to specify an OB. ToO Information --------------- Pre-Imaging Requirements ------------------------ Source of preimaging: The Hubble Ultra Deep Field and the GOODSv1.0 images, which have excellent astrometry. OB Information ============== Mask 1 is higher priority, and has 12 observing blocks: OBs 176354-176365 Mask 2 is lower priority, and has 12 observing blocks: OBs 176343-176353 and OB 176776 List of Science OBs ------------------- (for ISAAC imaging, please indicate the magnitude of the brightest star in the field for each OB) 176343-176365, 176776 Total Number of Submitted Science OBs: 24 List of Calibration OBs with Associated Science OBs --------------------------------------------------- Total Number of Submitted Calibration OBs: 0 (flats and arcs through the slit masks are taken as standard) OB Compliance Checks ==================== (Y = Yes, N = No, NA = Not Applicable) Do all your OBs comply with the instrument specific requirements listed on the instrument specific Phase 2 Web pages ? Y Do all your Finding Charts comply with the both the general and instrument-specific finding chart requirements? Y If you submitted OBs for standard stars, did you specify the magnitude and spectral type of all standard stars ? NA Have you included OBs for any calibrations that you need but which are not a part of the Calibration Plan? NA [UVES only] Do all your UVES OBs use only the allowed templates listed on the UVES Phase 2 Web pages ? NA [ISAAC only] Did you indicate the magnitude of the brightest star in the field for ISAAC imaging observations? NA [ISAAC only] If you submitted OBs for standard stars, did you use the provided StandardStar templates? NA [FLAMES only] Did you specify the hour angle range for which your Target Setup files are valid ? NA [FLAMES only] Did you specify the S/N ratio (at some reference wavelength and per single exposure) you expect to reach with these observations? NA [VIMOS only] Did you specify suitable guide stars for all your OBs using Guidecam? NA [VIMOS only] Did you check that the chosen guide stars are suitable for all the offset positions and that they do not produce unacceptable vignetting of the field of view? NA [MIDI only] Did you indicate for each science star OB the corresponding calibrator star OB name in the ReadMe file as well as in the comments of the OB ? NA [MIDI only] If you use calibrator stars which are not in the CalVin database, did you specify their characteristics in the ReadMe file and in the OBs ? NA If you answered "NO" to any of these questions, please revise your OBs *before* submission.