README Template 74.1 (please do not delete the README Template Version line!) ESO Programme ID: 074.A-0094(A) Principal Investigator Name: Max Pettini Principal Investigator E-mail Address: pettini@ast.cam.ac.uk Principal Investigator Telephone Number: +44-1223-766670 Principal Investigator Postal Address: Institute of Astronomy, Madingley Road, Cambridge, CB3 0HA, UK Instrument: ISAAC OPC Priority Class: A OPC Approved Total Execution Time: 25.0 hours Estimated Total Execution Time (including overheads): 24:25:00.000 README File Submission Date: 18 August 2004 Programme Description ===================== General Overview ---------------- Medium Resolution near-IR spectroscopy of a high z QSO. One QSO, two wavelength settings, 10 OBs for each setting. QSO will not be visible at acquisition. Target coordinates are those of nearby reference star. When acquired at the specified slit angle, QSO will be on the slit too. In acquisition OBs I have specified RA and Dec offsets to be applied after the reference star has been acquired in the centre of the slit. These offsets are to place the mid-position between reference star and QSO in the centre of the slit. After performing these (small) offsets, the reference star will still be visible on the slit. Please ensure that star is well centred across the slit Approved Waiver Request Summary ------------------------------- I have requested approval to exceed the maximum of 1 hour execution time per OB and it has been granted (074.A-0094A.01.WAV) Critical Observing Condition Constraints ---------------------------------------- N/A Time Critical Aspects --------------------- N/A Special Calibration Information ------------------------------- None. However, when you obtain the normal flux standard star calibrations, I'd be grateful if you could maximise the S/N of the standard star spectrum, by either choosing a standard at the bright end of the magnitude range, and/or giving it the maximum allowed the exposure time. ToO Information --------------- N/A Pre-Imaging Requirements ------------------------ N/A OB Information ============== List of Science OBs ------------------- (for ISAAC imaging, please indicate the magnitude of the brightest star in the field for each OB) J1030+054_A1, through to J1030+054_A10 (10 OBs) J1030+054_B1, through to J1030+054_B10 (10 OBs) Total Number of Submitted Science OBs: 20 List of Calibration OBs with Associated Science OBs --------------------------------------------------- Total Number of Submitted Calibration OBs: None OB Compliance Checks ==================== (Y = Yes, N = No, NA = Not Applicable) Do all your OBs comply with the instrument specific requirements listed on the instrument specific Phase 2 Web pages ? [Y] Do all your Finding Charts comply with the both the general and instrument-specific finding chart requirements? [Y] If you submitted OBs for standard stars, did you specify the magnitude and spectral type of all standard stars ? [NA] Have you included OBs for any calibrations that you need but which are not a part of the Calibration Plan? [NA] [UVES only] Do all your UVES OBs use only the allowed templates listed on the UVES Phase 2 Web pages ? [NA] [ISAAC only] Did you indicate the magnitude of the brightest star in the field for ISAAC imaging observations? [NA] [ISAAC only] If you submitted OBs for standard stars, did you use the provided StandardStar templates? [NA] [FLAMES only] Did you specify the hour angle range for which your Target Setup files are valid ? [NA] [FLAMES only] Did you specify the S/N ratio (at some reference wavelength and per single exposure) you expect to reach with these observations? [NA] [VIMOS only] Did you specify suitable guide stars for all your OBs using Guidecam? [NA] [VIMOS only] Did you check that the chosen guide stars are suitable for all the offset positions and that they do not produce unacceptable vignetting of the field of view? [NA] [MIDI only] Did you indicate for each science star OB the corresponding calibrator star OB name in the ReadMe file as well as in the comments of the OB ? [NA] [MIDI only] If you use calibrator stars which are not in the CalVin database, did you specify their characteristics in the ReadMe file and in the OBs ? [NA] If you answered "NO" to any of these questions, please revise your OBs *before* submission.