README Template 73.1 (please do not delete the README Template Version line!) ESO Programme ID: 073.D-0652(A) Principal Investigator Name: Guido De Marchi Principal Investigator E-mail Address: gdemarchi@rssd.esa.int Principal Investigator Telephone Number: +31 71 565-8332 Principal Investigator Postal Address: European Space Agency / Science Communication Office / Keplerlaan 1, SCI-CC / 2200 AG Noordwijk / The Netherlands Instrument: NACO OPC Priority Class: A OPC Approved Total Execution Time: 9.0 Estimated Total Execution Time (including overheads): 8.0 README File Submission Date: 22.07.2004 Programme Description ===================== General Overview ---------------- This is a programme aimed at detecting the white dwarf cooling sequence in the globular cluster M4. In part A, described here, we will use NACO to look for these cooling objects in a field identified on the basis of available HST data. Part B of the programme, described elsewhere, is a test run already executed to verify that the appropriate reference star has been selected for the adaptive optics. N.B. Using available high resolution HST images of M4, taken in the near-IR, we have selected a region of the cluster where the dithering pattern that we propose is sufficient to efficiently subtract the effect of the sky. We, therefore, do not need to take sky comparison fields at large offsets. Furthermore, data from a NACO test run on the same target have shown that a dithering pattern with a step of 0.8" as indicated is sufficient to fully remove the effects of the sky and cosmetics, including the streaking pattern affecting the new NACO detector. PLEASE DO NOT MODIFY THE SIZE OF THE DITHERING PATTERN. Approved Waiver Request Summary ------------------------------- Not applicable Critical Observing Condition Constraints ---------------------------------------- Excellent seeing (<0.6") and photometric conditions are needed, as requested and approved in Phase I. Time Critical Aspects --------------------- None Special Calibration Information ------------------------------- None ToO Information --------------- Not applicable Pre-Imaging Requirements ------------------------ Not applicable, since part B of the programme, already executed, was in practice pre-imaging. Source of preimaging: Not applicable. OB Information ============== List of Science OBs ------------------- (for ISAAC imaging, please indicate the magnitude of the brightest star in the field for each OB) Total Number of Submitted Science OBs: 8 M4_H_J_1 M4_H_J_2 M4_H_J_3 M4_H_J_4 M4_H_J_5 M4_H_J_6 M4_H_J_7 M4_H_J_8 The field of view is always the same, so the brightest object does not change. It is a star with J=15.2 and H=14.5. The brightness of the reference star is V=13.3. Important note on exposure times -------------------------------- Our objective is to reach the faintest possible magnitude limit within the allocated time. For this reason, we need to have individual exposure times (i.e. DIT) as long as possible, whilst however preventive serious saturation. Thanks to the large dynamic range of the new NACO detector, we have have used the data from part B of this programme to define exposure times such that the brightest star in the field will always stay just below the saturation limit in all frames. Please note that, since we are interested in the faintest objects in the field, WE DO NOT NEED TO OBTAIN THE PHOTOMETRY OF THE BRIGHTEST STAR, so if it saturates it is NOT a problem. With the defined exposure times, only two additional stars in the field will exceed the linearity regime, and we do not care about their photometry either. Please note that the brightest object is always the reference star (R1), which will normally be placed about 5" off the edge of the NACO S13 FOV. When it is observed to properly sample the PSF, half-way through each OB, we use a very short exposure time which has proved successful in part B of the programme, without the need for any neutral density filter. Observing strategy ------------------ The observing strategy is exactly the same for all OBs. Each OB will unfold as follows: 1. The target field, located 12" N of the reference star R1, is acquired and a series of six images is taken in the H band, each of duration DIT=207 s, using a suitable dithering pattern with a step of 0.8" (sufficient for successful sky subtraction, as we proved in part B). 2. The telescope is then slewed 9" S, so as to place the reference star R1 in the bottom half of the NACO chip (we specifically avoid to place it at the centre of the chip in order to stay away from a dead row there). The reference star R1 is imaged 26 times in the H band, with an exposure time of DIT=0.6 s, and 20 times in the J band, with an exposure time of DIT=1 s. A suitable, 2-step dithering pattern is applied between exposures. No neutral density filter is needed, as shown in part B of the programme. 3. Subsequently, the telescope is slewed back to the main target, located 12" N of the reference star R1, and a series of three dithered images is taken in the J band, each of duration DIT=400 s. Although the availability of previous HST/NICMOS images of the target field will make it easier to obtain an accurate photometric calibration without the use of spectro-photometric standard stars, experience shows that imaging periodically the reference star will provide a better characterisation of the PSF, eventually resulting in a more reliable reduction of the NACO data. List of Calibration OBs with Associated Science OBs --------------------------------------------------- Total Number of Submitted Calibration OBs: 0 None OB Compliance Checks ==================== (Y = Yes, N = No, NA = Not Applicable) Do all your OBs comply with the instrument specific requirements listed on the instrument specific Phase 2 Web pages ? [Y] Do all your Finding Charts comply with the both the general and instrument-specific finding chart requirements? [Y] If you submitted OBs for standard stars, did you specify the magnitude and spectral type of all standard stars ? [NA] Have you included OBs for any calibrations that you need but which are not a part of the Calibration Plan? [NA] [UVES only] Do all your UVES OBs use only the allowed templates listed on the UVES Phase 2 Web pages ? [NA] [ISAAC only] Did you indicate the magnitude of the brightest star in the field for ISAAC imaging observations? [NA] [ISAAC only] If you submitted OBs for standard stars, did you use the provided StandardStar templates? [NA] [FLAMES only] Did you specify the hour angle range for which your Target Setup files are valid ? [NA] [VIMOS only] Did you specify suitable guide stars for all your OBs using Guidecam? [NA] [VIMOS only] Did you check that the chosen guide stars are suitable for all the offset positions and that they do not produce unacceptable vignetting of the field of view? [NA] [MIDI only] Did you indicate for each science star OB the corresponding calibrator star OB name in the ReadMe file as well as in the comments of the OB ? [NA] [MIDI only] If you use calibrator stars which are not in the CalVin database, did you specify their characteristics in the ReadMe file and in the OBs ? [NA] If you answered "NO" to any of these questions, please revise your OBs *before* submission.