README Template 73.1 (please do not delete the README Template Version line!) ESO Programme ID: 073.D-0024 Principal Investigator Name: C.J. Akerman Principal Investigator E-mail Address: cja@ast.cam.ac.uk Principal Investigator Telephone Number: +44-1223-766645 Principal Investigator Postal Address: Institute of Astronomy, Madingley Road, Cambridge, CB3 0HA, U.K. Instrument: UVES OPC Priority Class: B OPC Approved Total Execution Time: 30 hours Estimated Total Execution Time (including overheads): 29:59:45.000 README File Submission Date: 23rd February 2004 Programme Description ===================== General Overview ---------------- We aim to get high signal-to-noise ratio (S/N ~ 300) spectra of metal poor stars in the Galactic halo in order to accurately determine carbon and oxygen abundances from C I lines around 9100 A and from the O I triplet at 7774 A. We have 29 science target OBs, each consisting of three or more exposures. We need to accurately remove telluric features which occur near to the C I lines around 9100 A and therefore require a standard star to be observed with our setup on every night that our target stars are observed. Given that we have to estimate the number of standard star OBs that we will need, our preferred observing strategy would be to observe one target star, followed by a telluric standard, followed by a second target star, third, and possibly more target stars. If our target stars could be observed in roughly this way so that we do not run out of telluric standard star OBs then we would be very grateful. Approved Waiver Request Summary ------------------------------- N/A Critical Observing Condition Constraints ---------------------------------------- It would be preferable if our OBs could be observed with humidity below 50% so that the strength of the telluric water vapour lines in our spectra is limited. As the strength of the telluric lines also scales in proportion to the airmass, we would be grateful if our OBs could be observed at low airmasses, although we have given a fairly relaxed constraint of airmass < 2.0 in the hope that they will all get observed. Time Critical Aspects --------------------- N/A Special Calibration Information ------------------------------- We have provided 10 telluric standard star OBs of 4 different stars over a range in RA. We require that one of these OBs is executed immediately after the first science OB on every night that our target stars are observed. Only one of these standard star OBs should be executed per night. We leave it up to the observer to choose an appropriate standard star OB to execute - it would be best to have the airmasses of the standard star and target star OBs as close as possible so that telluric line strengths are similar. Due to the high S/N ratios we require for our program, we request that 5 extra (10 in total) flat field spectra are taken during the usual daytime calibrations at our settings. All our OBs consist of three or more separate exposures. If the night astronomer would not mind, we would be grateful if they would offset the target star along the slit by around 1.5 arcseconds in between each exposure so that we can sample over more pixels to reduce problems related to CCD fringing. ToO Information --------------- N/A Pre-Imaging Requirements ------------------------ N/A OB Information ============== List of Science OBs ------------------- (for ISAAC imaging, please indicate the magnitude of the brightest star in the field for each OB) Total Number of Submitted Science OBs: BPS-CS22943-095_1, through to BPS-CS22943-095_4 (4 OBs) CD-24_17504_1, through to CD-24_17504_5 (5 OBs) CD-71_1234 (1 OB) G126-52_1 and G126-52_2 (2 OBs) G166-54_1 and G166-54_2 (2 OBs) G4-37_1, through to G4-37_3 (3 OBs) G48-29 (1 OB) G59-27_1 and G59-27_2 (2 OBs) HD338529 (1 OB) HD84937 (1 OB) LP635-14_1, through to LP635-14_3 (3 OBs) LP651-4_1, through to LP651-4_4 (4 OBs) std_HR5488_a and std_HR5488_b (V=6.09, Type: B2III) (2 OBs) std_HR6788_a and std_HR6788_b (V=6.13, Type: B1V) (2 OBs) std_HR8385_a and std_HR8385_b (V=5.99, Type: B3III) (2 OBs) std_HR9006_a, through to std_HR9006_d (V=5.16, Type: B3V) (4 OBs) 39 (29 target star OBs + 10 telluric standard star OBs) List of Calibration OBs with Associated Science OBs --------------------------------------------------- Total Number of Submitted Calibration OBs: None OB Compliance Checks ==================== (Y = Yes, N = No, NA = Not Applicable) Do all your OBs comply with the instrument specific requirements listed on the instrument specific Phase 2 Web pages ? [Y] Do all your Finding Charts comply with the both the general and instrument-specific finding chart requirements? [Y] If you submitted OBs for standard stars, did you specify the magnitude and spectral type of all standard stars ? [Y] Have you included OBs for any calibrations that you need but which are not a part of the Calibration Plan? [NA] [UVES only] Do all your UVES OBs use only the allowed templates listed on the UVES Phase 2 Web pages ? [Y] [ISAAC only] Did you indicate the magnitude of the brightest star in the field for ISAAC imaging observations? [NA] [ISAAC only] If you submitted OBs for standard stars, did you use the provided StandardStar templates? [NA] [FLAMES only] Did you specify the hour angle range for which your Target Setup files are valid ? [NA] [VIMOS only] Did you specify suitable guide stars for all your OBs using Guidecam? [NA] [VIMOS only] Did you check that the chosen guide stars are suitable for all the offset positions and that they do not produce unacceptable vignetting of the field of view? [NA] [MIDI only] Did you indicate for each science star OB the corresponding calibrator star OB name in the ReadMe file as well as in the comments of the OB ? [NA] [MIDI only] If you use calibrator stars which are not in the CalVin database, did you specify their characteristics in the ReadMe file and in the OBs ? [NA] If you answered "NO" to any of these questions, please revise your OBs *before* submission.