README Template 73.1 (please do not delete the README Template Version line!) ESO Programme ID: 073.B-0787(A) Principal Investigator Name: M. Dessauges-Zavadsky Principal Investigator E-mail Address: miroslava.dessauges@obs.unige.ch Principal Investigator Telephone Number: +41-22-755.26.11 Principal Investigator Postal Address: Geneva Observatory / 51, Ch. des Maillettes / CH-1290 Sauverny / Switzerland Instrument: UVES OPC Priority Class: B OPC Approved Total Execution Time: 19.0 Estimated Total Execution Time (including overheads): 18.75 README File Submission Date: 25 February 2004 Programme Description ===================== General Overview ---------------- This is a simple UVES programme. We want to obtain high-quality spectra of four relatively bright quasars Q0216+08 (V=18.1), Q1209+0919 (V=18.5), FJ2334-09 (V=17.9) and Q2359-022 (V=18.0) for an abundance study of 6 intervening damped Lyman-alpha systems. We have prepared science OBs of 3600s each. There are 2-7 OBs per object with the same setting (except for FJ2334-09 and Q2359-022 for which we use two different settings, see below the "List of Science OBs"). Approved Waiver Request Summary ------------------------------- No waiver request has been accepted. Critical Observing Condition Constraints ---------------------------------------- We have no critical observing condition constraints. Please, note that the observing condition constraints we have specified in our OBs have to be considered as UPPER LIMITS. We would appreciate better constraints as the ones specified if possible. Time Critical Aspects --------------------- We have no time critical aspects. Please, note that the choosen targets are well visible: Q0216+08 second part of nights from July to end of August Q1209+0919 from April to mid-July FJ2334-09 from mid-May to October Q2359-022 from mid-May to October Special Calibration Information ------------------------------- We have attached to each science OB with the setting Dic1 one wavelength calibration (in the BLUE arm format only), in order to have wavelength calibrations made immediately after the science exposure. We would like to have attached wavelength calibration for the science OBs with the setting Dic2 as well. By fixing the number of exposure and the exposure time in the RED arm to 0, we will avoid remnants on the CCD at the positions of the heavy saturated lines. ToO Information --------------- This is not a To0 programmme. Pre-Imaging Requirements ------------------------ No pre-imaging is required for this programme. Source of preimaging: Not applicable OB Information ============== List of Science OBs ------------------- (for ISAAC imaging, please indicate the magnitude of the brightest star in the field for each OB) Total Number of Submitted Science OBs: 16 Q0216_dic2_B390+R860_1 Q0216_dic2_B390+R860_2 Q0216_dic2_B390+R860_3 Q0216_dic2_B390+R860_4 Q1209_dic1_B390+R580_1 Q1209_dic1_B390+R580_2 FJ2334_dic2_B437+R860_1 FJ2334_dic2_B437+R860_2 FJ2334_dic2_B437+R860_3 FJ2334_dic2_B437+R860_4 FJ2334_dic1_B390+R580_1 FJ2334_dic1_B390+R580_2 FJ2334_dic1_B390+R580_3 Q2359_dic1_B390+R580_1 Q2359_dic2_B390+R860_1 Q2359_dic2_B390+R860_2 List of Calibration OBs with Associated Science OBs --------------------------------------------------- Total Number of Submitted Calibration OBs: 0 OB Compliance Checks ==================== (Y = Yes, N = No, NA = Not Applicable) Do all your OBs comply with the instrument specific requirements listed on the instrument specific Phase 2 Web pages ? [Y] Do all your Finding Charts comply with the both the general and instrument-specific finding chart requirements? [Y] If you submitted OBs for standard stars, did you specify the magnitude and spectral type of all standard stars ? [NA] Have you included OBs for any calibrations that you need but which are not a part of the Calibration Plan? [NA] [UVES only] Do all your UVES OBs use only the allowed templates listed on the UVES Phase 2 Web pages ? [Y] [ISAAC only] Did you indicate the magnitude of the brightest star in the field for ISAAC imaging observations? [NA] [ISAAC only] If you submitted OBs for standard stars, did you use the provided StandardStar templates? [NA] [FLAMES only] Did you specify the hour angle range for which your Target Setup files are valid ? [NA] [VIMOS only] Did you specify suitable guide stars for all your OBs using Guidecam? [NA] [VIMOS only] Did you check that the chosen guide stars are suitable for all the offset positions and that they do not produce unacceptable vignetting of the field of view? [NA] [MIDI only] Did you indicate for each science star OB the corresponding calibrator star OB name in the ReadMe file as well as in the comments of the OB ? [NA] [MIDI only] If you use calibrator stars which are not in the CalVin database, did you specify their characteristics in the ReadMe file and in the OBs ? [NA] If you answered "NO" to any of these questions, please revise your OBs *before* submission.