README Template 73.1 ESO Programme ID: 073.B-0478(A) Principal Investigator Name: Marcio Catelan Principal Investigator E-mail Address: catelan@astro.puc.cl Principal Investigator Telephone Number: (56-2) 354-4933 Principal Investigator Postal Address: P. Universidad de Chile / Departamento de Astronomia y Astrofisica / Vicuna Mackenna 4860, Cassilla 306 / Santiago, Chile Instrument: NACO OPC Priority Class: A OPC Approved Total Execution Time: 14.0 Estimated Total Execution Time (including overheads): 14.0 README File Submission Date: 23 Feb 2004 Programme Description ===================== General Overview ---------------- This is a simple imaging programe of a single globular cluster in NGC6822, observed through J and Ks filters. We plan to use the cluster core as the AO refererence source. This cluster has a published integrated magnitude of V=15.8 in a 6.5" radius aperture. However, there is also a bright field star with V=16.2 which is 5 arcseconds southeast of the cluster, which could be used as an alternative AO reference source. Note that I have used V=16.2 in the JNPS software when calculating exposure times. The dither pattern should cover a 3" box centered on the cluster, and a 6" box on the sky field, which is ~11' to the northeast. The exposure times for each filter have been chosen so that the brightest NGC6822 stars should be just below the linearity limit of the array. If this is not the case, then something has gone wrong, and the PI should be contacted before continuing with the observations. Approved Waiver Request Summary ------------------------------- None. Critical Observing Condition Constraints ---------------------------------------- None. Time Critical Aspects --------------------- None. Special Calibration Information ------------------------------- None. ToO Information --------------- None. Pre-Imaging Requirements ------------------------ None. Source of preimaging: NA OB Information ============== List of Science OBs ------------------- (for ISAAC imaging, please indicate the magnitude of the brightest star in the field for each OB) Total Number of Submitted Science OBs: 14 H-VII-J-1 H-VII-J-2 H-VII-J-3 H-VII-J-4 H-VII-J-5 H-VII-J-6 H-VII-J-7 H-VII-K-1 H-VII-K-2 H-VII-K-3 H-VII-K-4 H-VII-K-5 H-VII-K-6 H-VII-K-7 List of Calibration OBs with Associated Science OBs --------------------------------------------------- None. Total Number of Submitted Calibration OBs: 0 Additional Requirements for NAOS-CONICA ======================================= Magnitude of the brightest object in all fields ----------------------------------------------- The foreground star 5" SE of the cluster has V=15.8, and K~14.3. The cluster should have a fainter peak surface brightness of V~15.3 mag/arcsec^2 or K~16.8 mag/arcsec^2 OB Compliance Checks ==================== (Y = Yes, N = No, NA = Not Applicable) Do all your OBs comply with the instrument specific requirements listed on the instrument specific Phase 2 Web pages ? [Y] Do all your Finding Charts comply with the both the general and instrument-specific finding chart requirements? [Y] If you submitted OBs for standard stars, did you specify the magnitude and spectral type of all standard stars ? [NA] Have you included OBs for any calibrations that you need but which are not a part of the Calibration Plan? [NA] [UVES only] Do all your UVES OBs use only the allowed templates listed on the UVES Phase 2 Web pages ? [NA] [ISAAC only] Did you indicate the magnitude of the brightest star in the field for ISAAC imaging observations? [NA] [ISAAC only] If you submitted OBs for standard stars, did you use the provided StandardStar templates? [NA] [FLAMES only] Did you specify the hour angle range for which your Target Setup files are valid ? [NA] [VIMOS only] Did you specify suitable guide stars for all your OBs using Guidecam? [NA] [VIMOS only] Did you check that the chosen guide stars are suitable for all the offset positions and that they do not produce unacceptable vignetting of the field of view? [NA] [MIDI only] Did you indicate for each science star OB the corresponding calibrator star OB name in the ReadMe file as well as in the comments of the OB ? [NA] [MIDI only] If you use calibrator stars which are not in the CalVin database, did you specify their characteristics in the ReadMe file and in the OBs ? [NA] If you answered "NO" to any of these questions, please revise your OBs *before* submission.