README Template 73.1 (please do not delete the README Template Version line!) ESO Programme ID: 073.B-0423(A) Principal Investigator Name: Matthias Dietrich Principal Investigator E-mail Address: dietrich@chara.gsu.edu Principal Investigator Telephone Number: 001 404 651 1363 Principal Investigator Postal Address: Georgia State University / Dept. of Physics and Astronomy / One Park Place South, SE, Suite 700 / Atlanta, GA 30303, U.S.A. Instrument: ISAAC OPC Priority Class: C OPC Approved Total Execution Time: 18 Estimated Total Execution Time (including overheads): 17:56:36 README File Submission Date: 08 March 2004 Programme Description ===================== General Overview ---------------- J, H, and K band spectra in LR mode of four high redshift quasars should be observed using ISAAC. RA J2000 Dec z m_H SDSS1129-0142 11 29 56.1 -01 42 12 4.85 17.7 SDSS1208+0010 12 08 23.8 +00 10 28 5.27 18.8 SDSS1605-0112 16 05 01.2 -01 12 26 4.92 17.9 SDSS2200+0017 22 00 08.7 +00 17 44 4.77 17.2 For each high-z quasar are at least two finding charts are provided, displaying the field of view of ISAAC. Since the quasars at the faint end of the range that can be centered directly on the slit, for each quasar a closeby reference star is given. The orientation of the slit is set to PA = N-S. SDSS1129-0142 : the ref.star should be centered to the slit and then the offset as indicated in the OB should be performed: delta RA = -33.1 arcsec delta Dec = +16.0 arcsec to move the quasar into the 1.0 arcsec wide slit finding charts: DSS2 red Zheng et al. 2000, AJ, 120, 1607 SDSS data archive SDSS1208+0010 : the ref.star should be centered to the slit and then the offset as indicated in the OB should be performed: delta RA = -33.5 arcsec delta Dec = -8.0 arcsec to move the quasar into the 1.0 arcsec wide slit finding charts: DSS2 red Zheng et al. 2000, AJ, 120, 1607 SDSS data archive SDSS1605-0112 : the ref.star should be centered to the slit and then the offset as indicated in the OB should be performed: delta RA = -17.3 arcsec delta Dec = -42.0 arcsec to move the quasar into the 1.0 arcsec wide slit finding charts: DSS2 red Fan et al. 2000, AJ, 119, 1 SDSS2200+0017 : the ref.star should be centered to the slit and then the offset as indicated in the OB should be performed: delta RA = +3.6 arcsec delta Dec = +19.0 arcsec to move the quasar into the 1.0 arcsec wide slit finding charts: DSS2 red Anderson et al. 2001, AJ, 122, 502 The observations of the high-z quasar can be done under clear sky conditions. Since the observations are done in service mode and hence in ISAAC standard settings, the calibrations (bias, dark, flatfield, wavelegth calibration, and the flux calibration stars) will be already provided by ESO. Approved Waiver Request Summary ------------------------------- none Critical Observing Condition Constraints ---------------------------------------- none Time Critical Aspects --------------------- none Special Calibration Information ------------------------------- Since we are using ISAAC standard settings we will use the corresponding calibration frames that are provided by ESO. For the flux calibration we would like to ask for the standard star observations taken by ESO, i.e. standard stars earlier than spectral type B4 and/or solar type stars with G0V to G4V. ToO Information --------------- This is not a ToO programme. Pre-Imaging Requirements ------------------------ none Source of preimaging: OB Information ============== List of Science OBs ------------------- (for ISAAC imaging, please indicate the magnitude of the brightest star in the field for each OB) SDSS1129-0142-1 J J12.6 SDSS1129-0142-2 H H12.3 SDSS1129-0142-3 H H12.3 SDSS1129-0142-4 K K12.2 SDSS1129-0142-5 K K12.2 SDSS1208+0010-1 J J15.9 SDSS1208+0010-2 H H15.6 SDSS1208+0010-3 H H15.6 SDSS1208+0010-4 K K15.5 SDSS1208+0010-5 K K15.5 SDSS1605-0112-1 J J15.7 SDSS1605-0112-2 H H15.4 SDSS1605-0112-3 H H15.4 SDSS1605-0112-4 K K15.3 SDSS1605-0112-5 K K15.3 SDSS2200+0017-1 J J12.8 SDSS2200+0017-2 H H12.5 SDSS2200+0017-3 H H12.5 SDSS2200+0017-4 K K12.4 Total Number of Submitted Science OBs: 19 List of Calibration OBs with Associated Science OBs --------------------------------------------------- none Total Number of Submitted Calibration OBs: OB Compliance Checks ==================== (Y = Yes, N = No, NA = Not Applicable) Do all your OBs comply with the instrument specific requirements listed on the instrument specific Phase 2 Web pages ? [Y] Do all your Finding Charts comply with the both the general and instrument-specific finding chart requirements? [Y] If you submitted OBs for standard stars, did you specify the magnitude and spectral type of all standard stars ? [NA] Have you included OBs for any calibrations that you need but which are not a part of the Calibration Plan? [NA] [UVES only] Do all your UVES OBs use only the allowed templates listed on the UVES Phase 2 Web pages ? [NA] [ISAAC only] Did you indicate the magnitude of the brightest star in the field for ISAAC imaging observations? [NA] [ISAAC only] If you submitted OBs for standard stars, did you use the provided StandardStar templates? [NA] [FLAMES only] Did you specify the hour angle range for which your Target Setup files are valid ? [NA] [VIMOS only] Did you specify suitable guide stars for all your OBs using Guidecam? [NA] [VIMOS only] Did you check that the chosen guide stars are suitable for all the offset positions and that they do not produce unacceptable vignetting of the field of view? [NA] [MIDI only] Did you indicate for each science star OB the corresponding calibrator star OB name in the ReadMe file as well as in the comments of the OB ? [NA] [MIDI only] If you use calibrator stars which are not in the CalVin database, did you specify their characteristics in the ReadMe file and in the OBs ? [NA] If you answered "NO" to any of these questions, please revise your OBs *before* submission.