README Template 72.1 (please do not delete the README Template Version line!) ESO Programme ID: 072.D-0557(A) Principal Investigator Name: W. Thomas Vestrand Principal Investigator E-mail Address: vestrand@lanl.gov Principal Investigator Telephone Number: +1 505 665-9542 Principal Investigator Postal Address: Los Alamos National Laboratory NIS-2 Division P.O. Box 1663 Los Alamos, NM 87545 USA Instrument: FORS2 OPC Priority Class: A OPC Approved Total Execution Time: 10.5 Estimated Total Execution Time (including overheads): NA (ToO) README File Submission Date: 20.08.2003 Programme Description ===================== General Overview ---------------- This program is aimed at detecting the optical afterglow of X-ray Flashes (XRFs) detected by the HETE-II and Swift satellites. To date, no such optical counterpart has been detected. Therefore it is expected to be either intrinsically faint, or rapidly fading after the X-ray event. If we do detect an optical afterflow in the initial follow-up images, we plan to take an optical spectrum of the optical counterpart in the night following the initial imaging observations. Approved Waiver Request Summary ------------------------------- None. Critical Observing Condition Constraints ---------------------------------------- Sine this is a ToO program, speed of the follow-up observation is more impotant than any restriction on ambient conditions. Time Critical Aspects --------------------- Since this is a ToO program, these observations need to be obtained as soon as possible, but no more than 48 hours after, the activation e-mail has been sent. Special Calibration Information ------------------------------- None. ToO Information --------------- Our observing strategy for this ToO program is twofold: 1. After an XRF observable from Paranal has been detected by the HETE-II or Swift satellites, we plan to activate imaging observations in the R-band on FORS2 (this program) and in the K-band on ISAAC (program 072.D-0557(B)) in the hopes of either detecting an optical/near-IR counterpart, or placing stringent upper limits on the optical/near-IR afterglow. 2. If we do detect an optical/near-IR counterpart to the XRF, we plan to activate a second ToO observing request, in order to obtain spectroscopy of the afterglow with FORS2 (this program) or UVES (program 072.D-0557(C)), and/or ISAAC (program 072.D-0557(B)). Pre-Imaging Requirements ------------------------ None. OB Information ============== List of Science OBs with Associated Finding Charts -------------------------------------------------- TOO-XRF-R-short - Finding Chart to be submitted directly to Paranal TOO-XRF-R-long - Finding Chart to be submitted directly to Paranal TOO-XRF-R-LSS - Finding Chart to be submitted directly to Paranal Total Number of Submitted Science OBs: 3 Total Number of Submitted Finding Charts: 0 List of Calibration OBs with Associated Science OBs --------------------------------------------------- Total Number of Submitted Calibration OBs: 0 Phase 2 package Compliance Checks ================================= (Y = Yes, N = No, NA = Not Applicable) Do all your OBs comply with the instrument specific requirements listed on the instrument specific Phase 2 Web pages ? [Y] Do all your Finding Charts comply with the both the general and instrument-specific finding chart requirements? [NA] If you submitted OBs for standard stars, did you specify the magnitude and spectral type of all standard stars ? [NA] Have you included OBs for any calibrations that you need but which are not a part of the Calibration Plan? [NA] [FORS only] Do all your FORS OBs use only the allowed detector read-out modes listed on the FORS1/FORS2 Phase 2 Web pages? [Y] [FORS only] Do all your FORS MOS/LSS OBs contain the mandatory "through-slit image" template? [Y] [UVES only] Do all your UVES OBs use only the allowed templates listed on the UVES Phase 2 Web pages ? [NA] [ISAAC only] Are ALL the objects in your field-of-view fainter than the magnitude limits specified on the ISAAC Phase 2 Web page ? [NA] [ISAAC only] If you submitted OBs for standard stars, did you use the provided ISAAC*_*_cal_* templates? [NA] [FLAMES only] Did you specify the hour angle range for which your Target Setup files are valid ? [NA] [VIMOS only] Did you specify suitable guide stars for all your OBs using Guidecam? [NA] [VIMOS only] Did you check that the chosen guide stars are suitable for all the offset positions and that they do not produce unacceptable vignetting of the field of view? [NA] If you answered "NO" to any of these questions, please revise your OBs *before* submission.