README Template 72.1 (please do not delete the README Template Version line!) ESO Programme ID: 072.D-0309A Principal Investigator Name: Claudio Melo Principal Investigator E-mail Address: cmelo@eso.org Principal Investigator Telephone Number: +56 2 463 30 79 Principal Investigator Postal Address: European Southern Observatory / Av. Alonso de Cordoba, 3107 / Santiago / Chile Instrument: FLAMES OPC Priority Class: B OPC Approved Total Execution Time: 11.5h Estimated Total Execution Time (including overheads): 11.68h README File Submission Date: 18 August 2003 Programme Description ===================== General Overview ---------------- This is a simple spectroscopic program using two UVES/FLAMES (8FIB mode) set-up's, 580 nm and 860 nm. The aim is to collect high S/N (~100) spectra in order to derive chemical abundances. Such S/N is expected to be reached in one single exposure for GroupA targets and by combining two exposures with S/N~70 for GroupB objects. Approved Waiver Request Summary ------------------------------- We have requested to have a few OBs lasting more than 1h. This request was submitted on 14 August 2003 and approved on 19 August 2003. Critical Observing Condition Constraints ---------------------------------------- There are two groups of stars (A & B) and two pointings per group: Group_A_p1_ and Group_A_p2_, Group_B_p1_ and Group_B_p2_. For a given group of 2 OBs (e.g.: Group_A_p1_580 and Group_A_p1_860), please, make sure to start with the 580 nm set-up. Also, if a 580nm setup is executed, please, make sure to execute the 860nm corresponding OB, if possible. In short, the order of execution should be the following: M67_Group_A_p1_580 M67_Group_A_p1_860 M67_Group_A_p2_580 M67_Group_A_p2_860 M67_Group_B_p1_580-1 M67_Group_B_p1_580-2 M67_Group_B_p1_860-1 M67_Group_B_p1_860-2 M67_Group_B_p2_580-1 M67_Group_B_p2_580-2 M67_Group_B_p2_860-1 M67_Group_B_p2_860-2 ** Due to the low declination of the targets, all OBs must be executed within an hour angle -1.0 < HA < 1.0 ** ** Validity check (within CONFIGURE) performed for -4 < HA < 4 ** Time Critical Aspects --------------------- None. Special Calibration Information ------------------------------- None. ToO Information --------------- None. Pre-Imaging Requirements ------------------------ None. OB Information ============== List of Science OBs with Associated Finding Charts -------------------------------------------------- Total Number of Submitted Science OBs: 12 Total Number of Submitted Finding Charts: 4 M67_Group_A_p1_580 = 72.D-0309A.001.ps M67_Group_A_p1_860 = 72.D-0309A.001.ps M67_Group_A_p2_860 = 72.D-0309A.002.ps M67_Group_A_p2_580 = 72.D-0309A.002.ps M67_Group_B_p1_580-1 = 72.D-0309A.003.ps M67_Group_B_p1_580-2 = 72.D-0309A.003.ps M67_Group_B_p1_860-1 = 72.D-0309A.003.ps M67_Group_B_p1_860-2 = 72.D-0309A.003.ps M67_Group_B_p2_580-1 = 72.D-0309A.004.ps M67_Group_B_p2_580-2 = 72.D-0309A.004.ps M67_Group_B_p2_860-1 = 72.D-0309A.004.ps M67_Group_B_p2_860-2 = 72.D-0309A.004.ps List of Calibration OBs with Associated Science OBs --------------------------------------------------- Total Number of Submitted Calibration OBs: Phase 2 package Compliance Checks ================================= (Y = Yes, N = No, NA = Not Applicable) Do all your OBs comply with the instrument specific requirements listed on the instrument specific Phase 2 Web pages ? [Y] Do all your Finding Charts comply with the both the general and instrument-specific finding chart requirements? [Y] If you submitted OBs for standard stars, did you specify the magnitude and spectral type of all standard stars ? [NA] Have you included OBs for any calibrations that you need but which are not a part of the Calibration Plan? [NA] [FORS only] Do all your FORS OBs use only the allowed detector read-out modes listed on the FORS1/FORS2 Phase 2 Web pages? [NA] [FORS only] Do all your FORS MOS/LSS OBs contain the mandatory "through-slit image" template? [NA] [UVES only] Do all your UVES OBs use only the allowed templates listed on the UVES Phase 2 Web pages ? [NA] [ISAAC only] Are ALL the objects in your field-of-view fainter than the magnitude limits specified on the ISAAC Phase 2 Web page ? [NA] [ISAAC only] If you submitted OBs for standard stars, did you use the provided ISAAC*_*_cal_* templates? [NA] [FLAMES only] Did you specify the hour angle range for which your Target Setup files are valid ? [Y] [VIMOS only] Did you specify suitable guide stars for all your OBs using Guidecam? [NA] [VIMOS only] Did you check that the chosen guide stars are suitable for all the offset positions and that they do not produce unacceptable vignetting of the field of view? [NA] If you answered "NO" to any of these questions, please revise your OBs *before* submission.