README Template 72.1 (please do not delete the README Template Version line!) ESO Programme ID: 072.0609(A) Principal Investigator Name: Jeremy R. Walsh Principal Investigator E-mail Address: jwalsh@eso.org Principal Investigator Telephone Number: +49 89 32006 248 Principal Investigator Postal Address: ST-ECF, ESO, KarlSchwarzschild Str. 2, D-87548 Garching, Germany Instrument: FORS2 OPC Priority Class: A OPC Approved Total Execution Time: 5.0hrs Estimated Total Execution Time (including overheads): 04:59:42.000 README File Submission Date: 08 August 2003 Programme Description ===================== Bessell B and V imaging in three equatorial fields are proposed. The exposure times are such that the limiting magnitudes will be 26 in B and 27 in V, providing an excellent complement to the i=27 ACS imaging. Seeing no worse than 0.8arcsec is requested since most of the galaxies are compact. Clear conditions are acceptable and dark. The V filter can be less dark than the B. This data is for pre-imaging for the MXU mask preparation so it would be appreciated if the data could be taken as quickly as early as possible. Standard observatory FORS2 direct imaging calibration (flat fields and standard star field) is assumed and is sufficient. General Overview ---------------- APPLES is the ACS Pure Parallel Lyman-alpha Emission Survey which was approved in HST Cycle 11 for parallel opportunities. The strategy was to obtain a direct image in F850LP (z) and/or F775W (i) and a slitless grism image in order to search for interesting objects in high latitude fields. The ACS G800L grism is sensitive to 5500-10500A and thus is particularly well suited to searching for continuum breaks and emission lines from galaxies at a range of redshift from H-alpha at z=0 to Lyman-alpha at z>6. For objects with a single emission line at say 7500A there is a strong ambiguity as to whether it is [O II], at z=1 or Lyman-alpha at z=5.2; The detection of continuum at observed frame B and V can distinguish the high z galaxies (Lyman-forest and lack of continuum below 1216 rest) from the lower z ones. Similar considerations also apply to sources with continuum breaks. In addition of course photometry in a broad band is more sensitive to continuum detection than dispersed spectrum. This VLT programme selects a three southern APPLES fields for which deep F850LP and G800L grism observations have been obtained for FORS2 B and V imaging to discriminate through the continuum break the low and redshift objects. Five hours was awarded to imaging and 7 hours to follow-up MXU spectroscopy to obtain emission line diagnostics at much higher dispersion than provided by the grism (resolution >80A). This proposal is for the imaging, which is pre-imaging for the MXU spectroscopy. Approved Waiver Request Summary ------------------------------- N/A Critical Observing Condition Constraints ---------------------------------------- Seeing at least 0.8arcsec and clear conditions Time Critical Aspects --------------------- N/A Special Calibration Information ------------------------------- N/A ToO Information --------------- N/A Pre-Imaging Requirements ------------------------ N/A OB Information ============== List of Science OBs with Associated Finding Charts -------------------------------------------------- PRE APPLES_U_1 072.A-0609A.001.ps PRE APPLES_U_2 072.A-0609A.001.ps PRE APPLES_L_1 072.A-0609A.002.ps PRE APPLES_L_2 072.A-0609A.002.ps PRE APPLES_R_1 072.A-0609A.003.ps PRE APPLES_R_2 072.A-0609A.003.ps Total Number of Submitted Science OBs: 6 Total Number of Submitted Finding Charts: 3 List of Calibration OBs with Associated Science OBs --------------------------------------------------- Total Number of Submitted Calibration OBs: 0 Phase 2 package Compliance Checks ================================= (Y = Yes, N = No, NA = Not Applicable) Do all your OBs comply with the instrument specific requirements listed on the instrument specific Phase 2 Web pages ? Y Do all your Finding Charts comply with the both the general and instrument-specific finding chart requirements? Y If you submitted OBs for standard stars, did you specify the magnitude and spectral type of all standard stars ? N/A Have you included OBs for any calibrations that you need but which are not a part of the Calibration Plan? N/A [FORS only] Do all your FORS OBs use only the allowed detector read-out modes listed on the FORS1/FORS2 Phase 2 Web pages? Y [FORS only] Do all your FORS MOS/LSS OBs contain the mandatory "through-slit image" template? N/A [UVES only] Do all your UVES OBs use only the allowed templates listed on the UVES Phase 2 Web pages ? N/A [ISAAC only] Are ALL the objects in your field-of-view fainter than the magnitude limits specified on the ISAAC Phase 2 Web page ? N/A [ISAAC only] If you submitted OBs for standard stars, did you use the provided ISAAC*_*_cal_* templates? N/A [FLAMES only] Did you specify the hour angle range for which your Target Setup files are valid ? N/A [VIMOS only] Did you specify suitable guide stars for all your OBs using Guidecam? N/A [VIMOS only] Did you check that the chosen guide stars are suitable for all the offset positions and that they do not produce unacceptable vignetting of the field of view? N/A If you answered "NO" to any of these questions, please revise your OBs *before* submission.