README Template 72.1 (please do not delete the README Template Version line!) ESO Programme ID: 72.A-0506(A) Principal Investigator Name: A. Renzini Principal Investigator E-mail Address: arenzini@eso.org Principal Investigator Telephone Number: +49089 3200 6413 Principal Investigator Postal Address: Karl-Schwarzschild-Str. 2 - Garching Instrument: VIMOS OPC Priority Class: B OPC Approved Total Execution Time: 1.0 Estimated Total Execution Time (including overheads): 1.0 README File Submission Date: 24 November 2003 Programme Description ===================== General Overview ---------------- This is a preimaging run. Short exposures in B- and I-bands are required in each submitted OB. 4 OBs are submitted (two widely separated fields, each field is covered by two OBs with some overlap). The reason for the two filters is that subsequent spectroscopy will be performed both on the red and blue wavelength ranges. Approved Waiver Request Summary ------------------------------- Critical Observing Condition Constraints ---------------------------------------- IMPORTANT: if possible, please execute the OBs when the field is passing close to the meridian (within 2 hours). Time Critical Aspects --------------------- Special Calibration Information ------------------------------- ToO Information --------------- Pre-Imaging Requirements ------------------------ OB Information ============== List of Science OBs with Associated Finding Charts -------------------------------------------------- Total Number of Submitted Science OBs: 4 Total Number of Submitted Finding Charts: 4 DaddiF_P1 = 072.A-0506A.001.ps DaddiF_P2 = 072.A-0506A.002.ps Deep3a_P1 = 072.A-0506A.003.ps Deep3a_P2 = 072.A-0506A.004.ps Please notice that the required guide-probe position (POS or NEG) is explicited in the "User Comments" area. It is always NEG, except Deep3a_P2 that requires POS. List of Calibration OBs with Associated Science OBs --------------------------------------------------- Total Number of Submitted Calibration OBs: 0 Phase 2 package Compliance Checks ================================= (Y = Yes, N = No, NA = Not Applicable) Do all your OBs comply with the instrument specific requirements listed on the instrument specific Phase 2 Web pages ? [Y] Do all your Finding Charts comply with the both the general and instrument-specific finding chart requirements? [Y] If you submitted OBs for standard stars, did you specify the magnitude and spectral type of all standard stars ? [NA] Have you included OBs for any calibrations that you need but which are not a part of the Calibration Plan? [NA] [FORS only] Do all your FORS OBs use only the allowed detector read-out modes listed on the FORS1/FORS2 Phase 2 Web pages? [NA] [FORS only] Do all your FORS MOS/LSS OBs contain the mandatory "through-slit image" template? [NA] [UVES only] Do all your UVES OBs use only the allowed templates listed on the UVES Phase 2 Web pages ? [NA] [ISAAC only] Are ALL the objects in your field-of-view fainter than the magnitude limits specified on the ISAAC Phase 2 Web page ? [NA] [ISAAC only] If you submitted OBs for standard stars, did you use the provided ISAAC*_*_cal_* templates? [NA] [FLAMES only] Did you specify the hour angle range for which your Target Setup files are valid ? [NA] [VIMOS only] Did you specify suitable guide stars for all your OBs using Guidecam? [Y] [VIMOS only] Did you check that the chosen guide stars are suitable for all the offset positions and that they do not produce unacceptable vignetting of the field of view? [Y] If you answered "NO" to any of these questions, please revise your OBs *before* submission.