README Template 72.1 (please do not delete the README Template Version line!) ESO Programme ID: 072.A-0457(B) Principal Investigator Name: J.-G. Cuby Principal Investigator E-mail Address: jcuby@eso.org Principal Investigator Telephone Number: 3190, 5317 Principal Investigator Postal Address: ESO - Casilla 19001, Santiago 19, Chile Please note: e-mail, phone and adress will change after November 1st, 2003. New adress will be communicated to usg Instrument: ISAAC OPC Priority Class: B OPC Approved Total Execution Time: 6 hrs Estimated Total Execution Time (including overheads): 6hrs 10min README File Submission Date: 20 August 2003 Programme Description ===================== General Overview ---------------- This is a simple J & Ks imaging programme. One J and one Ks OB at least need to be executed in photometric conditions, the others in clear. The seeing constraint is 0.6" and is meant as measured on ISAAC. Approved Waiver Request Summary ------------------------------- No waiver submitted Critical Observing Condition Constraints ---------------------------------------- Time Critical Aspects --------------------- No time critical aspect Special Calibration Information ------------------------------- ToO Information --------------- N/A Pre-Imaging Requirements ------------------------ N/A OB Information ============== List of Science OBs with Associated Finding Charts -------------------------------------------------- Total Number of Submitted Science OBs: 6 Total Number of Submitted Finding Charts: 1 ZERO_z6.17_J-1 072.A-0457B.001.ps z6.17_J-2 ZERO_z6.17_K-1 z6.17_K-2 z6.17_K-3 z6.17_K-4 List of Calibration OBs with Associated Science OBs --------------------------------------------------- Total Number of Submitted Calibration OBs: 0 Phase 2 package Compliance Checks ================================= (Y = Yes, N = No, NA = Not Applicable) Do all your OBs comply with the instrument specific requirements listed on the instrument specific Phase 2 Web pages ? [Y] Do all your Finding Charts comply with the both the general and instrument-specific finding chart requirements? [Y] If you submitted OBs for standard stars, did you specify the magnitude and spectral type of all standard stars ? [NA] Have you included OBs for any calibrations that you need but which are not a part of the Calibration Plan? [NA] [FORS only] Do all your FORS OBs use only the allowed detector read-out modes listed on the FORS1/FORS2 Phase 2 Web pages? [NA] [FORS only] Do all your FORS MOS/LSS OBs contain the mandatory "through-slit image" template? [NA] [UVES only] Do all your UVES OBs use only the allowed templates listed on the UVES Phase 2 Web pages ? [NA] [ISAAC only] Are ALL the objects in your field-of-view fainter than the magnitude limits specified on the ISAAC Phase 2 Web page ? [Y] [ISAAC only] If you submitted OBs for standard stars, did you use the provided ISAAC*_*_cal_* templates? [NA] [FLAMES only] Did you specify the hour angle range for which your Target Setup files are valid ? [NA] [VIMOS only] Did you specify suitable guide stars for all your OBs using Guidecam? [NA] [VIMOS only] Did you check that the chosen guide stars are suitable for all the offset positions and that they do not produce unacceptable vignetting of the field of view? [NA] If you answered "NO" to any of these questions, please revise your OBs *before* submission.