README Template 72.1 (please do not delete the README Template Version line!) ESO Programme ID: 072.A-0454(B) Principal Investigator Name: J.-G. Cuby Principal Investigator E-mail Address: jcuby@eso.org Principal Investigator Telephone Number: 3190, 5317 Principal Investigator Postal Address: ESO - Casilla 19001, Santiago 19, Chile Please note: e-mail, phone and adress will change after November 1st, 2003. New adress will be communicated to usg Instrument: ISAAC OPC Priority Class: A OPC Approved Total Execution Time: 38 hrs Estimated Total Execution Time (including overheads): 38 hrs README File Submission Date: 09 September 2003 Programme Description ===================== General Overview ---------------- Note: this program has been split in 2, (A) and (B). (B) has 35 OBs, (A) has 2 OBs for rapid data delivery. This is a simple imaging programme using long DITs (1155s). It is preferable that several OBs are executed during the same night for smooth sky variations, but this is not a must. There are 7 pointings in total. At least one OB should be executed under photometric conditions for each pointing, this is reflected in the constraint sets. Other OBs can be executed under 'clear' conditions. Seeing constraint is 0.6". This is meant as the measured IQ on ISAAC. This IQ constraint can be occasionally violated, up to 0.8". THE MOON IS A CONSTRAINT FOR THIS PROGRAMME. Please try to observe as far away from the Moon as possible, with reasonable FLIs. The Moon constraints in the OBs are indicative. The priorities are meant at completing one field before starting the next one. Approved Waiver Request Summary ------------------------------- No waiver submitted Critical Observing Condition Constraints ---------------------------------------- One OB from each pointing should be executed under photometric conditions. Time Critical Aspects --------------------- No time critical aspect Special Calibration Information ------------------------------- One standard star in the NB filter per night, as per calibration plan. Please try to use different stars when the conditions are photometric for better statistics on the ZP determination. ToO Information --------------- N/A Pre-Imaging Requirements ------------------------ N/A OB Information ============== List of Science OBs with Associated Finding Charts -------------------------------------------------- Total Number of Submitted Science OBs: 35 Total Number of Submitted Finding Charts: 7 (note the reference to run 0454A for the name of the findind charts, same as 0454B.) ZERO-CDFS-1190nm-F09-1 072.A-0454A.001.ps CDFS-1190nm-F09-4 CDFS-1190nm-F09-5 ZERO-CDFS-1190nm-F11-1 072.A-0454A.002.ps CDFS-1190nm-F11-2 CDFS-1190nm-F11-3 CDFS-1190nm-F11-4 CDFS-1190nm-F11-5 ZERO-CDFS-1190nm-F14-1 072.A-0454A.003.ps CDFS-1190nm-F14-2 CDFS-1190nm-F14-3 CDFS-1190nm-F14-4 CDFS-1190nm-F14-5 CDFS-1190nm-F14-6 ZERO-CDFS-1190nm-F15-1 072.A-0454A.004.ps CDFS-1190nm-F15-2 CDFS-1190nm-F15-3 CDFS-1190nm-F15-4 CDFS-1190nm-F15-5 ZERO-CDFS-1190nm-F16-1 072.A-0454A.005.ps CDFS-1190nm-F16-2 CDFS-1190nm-F16-3 CDFS-1190nm-F16-4 CDFS-1190nm-F16-5 CDFS-1190nm-F16-6 ZERO-CDFS-1190nm-F20-1 072.A-0454A.006.ps CDFS-1190nm-F20-2 CDFS-1190nm-F20-3 CDFS-1190nm-F20-4 CDFS-1190nm-F20-5 ZERO-CDFS-1190nm-F21-1 072.A-0454A.007.ps CDFS-1190nm-F21-2 CDFS-1190nm-F21-3 CDFS-1190nm-F21-4 CDFS-1190nm-F21-5 List of Calibration OBs with Associated Science OBs --------------------------------------------------- Total Number of Submitted Calibration OBs: 0 Phase 2 package Compliance Checks ================================= (Y = Yes, N = No, NA = Not Applicable) Do all your OBs comply with the instrument specific requirements listed on the instrument specific Phase 2 Web pages ? [Y] Do all your Finding Charts comply with the both the general and instrument-specific finding chart requirements? [Y] If you submitted OBs for standard stars, did you specify the magnitude and spectral type of all standard stars ? [NA] Have you included OBs for any calibrations that you need but which are not a part of the Calibration Plan? [NA] [FORS only] Do all your FORS OBs use only the allowed detector read-out modes listed on the FORS1/FORS2 Phase 2 Web pages? [NA] [FORS only] Do all your FORS MOS/LSS OBs contain the mandatory "through-slit image" template? [NA] [UVES only] Do all your UVES OBs use only the allowed templates listed on the UVES Phase 2 Web pages ? [NA] [ISAAC only] Are ALL the objects in your field-of-view fainter than the magnitude limits specified on the ISAAC Phase 2 Web page ? [Y] [ISAAC only] If you submitted OBs for standard stars, did you use the provided ISAAC*_*_cal_* templates? [NA] [FLAMES only] Did you specify the hour angle range for which your Target Setup files are valid ? [NA] [VIMOS only] Did you specify suitable guide stars for all your OBs using Guidecam? [NA] [VIMOS only] Did you check that the chosen guide stars are suitable for all the offset positions and that they do not produce unacceptable vignetting of the field of view? [NA] If you answered "NO" to any of these questions, please revise your OBs *before* submission.