README Template 72.1 (please do not delete the README Template Version line!) ESO Programme ID: 072.A-0346(B) Principal Investigator Name: C. Ledoux Principal Investigator E-mail Address: cledoux@eso.org Principal Investigator Telephone Number: +56 2 463 3056 Principal Investigator Postal Address: ESO Chile Instrument: UVES OPC Priority Class: A OPC Approved Total Execution Time: 8h Estimated Total Execution Time (including overheads): 8h README File Submission Date: 17/8/2003 Programme Description ===================== General Overview ---------------- The single target of this programme is a relatively faint, high-redshift QSO. We use the R580 setting to observe the Lyman-alpha forest of absorption lines which will be easy to recognize on the raw science images. Given the faintness of the target (R~19.3), it is important that the centering is carefully done on the slit, IF POSSIBLE using the secondary guiding (in the "slit centre" mode): for this, the Red SV integration time will probably have to be increased to ~60s. The five OBs are identical. Approved Waiver Request Summary ------------------------------- I requested a waiver (submitted on the 16/8/2003) to make OBs with an integration time of 1h27min each. Critical Observing Condition Constraints ---------------------------------------- Because the target is far to the North (delta=+27deg), the observations should be performed at the meridian +/- 1h30min (airmass constraint set to 1.8) which makes it possible to execute up to 2 OBs consecutively. Due to the always high airmass of the target (>1.63), the seeing will have to be, at lower airmass, significantly better than the requested 1" seeing before presetting to the target. This makes the programme somewhat challenging. Time Critical Aspects --------------------- Special Calibration Information ------------------------------- ToO Information --------------- Pre-Imaging Requirements ------------------------ OB Information ============== List of Science OBs with Associated Finding Charts -------------------------------------------------- j1443_1 \ j1443_2 | j1443_3 | 072.A-0346B.001.ps j1443_4 | j1443_5 / Total Number of Submitted Science OBs: 5 Total Number of Submitted Finding Charts: 1 List of Calibration OBs with Associated Science OBs --------------------------------------------------- Total Number of Submitted Calibration OBs: 0 Phase 2 package Compliance Checks ================================= (Y = Yes, N = No, NA = Not Applicable) Do all your OBs comply with the instrument specific requirements listed on the instrument specific Phase 2 Web pages ? [Y] Do all your Finding Charts comply with both the general and instrument-specific finding chart requirements? [Y] If you submitted OBs for standard stars, did you specify the magnitude and spectral type of all standard stars ? [NA] Have you included OBs for any calibrations that you need but which are not a part of the Calibration Plan? [NA] [FORS only] Do all your FORS OBs use only the allowed detector read-out modes listed on the FORS1/FORS2 Phase 2 Web pages? [NA] [FORS only] Do all your FORS MOS/LSS OBs contain the mandatory "through-slit image" template? [NA] [UVES only] Do all your UVES OBs use only the allowed templates listed on the UVES Phase 2 Web pages ? [Y] [ISAAC only] Are ALL the objects in your field-of-view fainter than the magnitude limits specified on the ISAAC Phase 2 Web page ? [NA] [ISAAC only] If you submitted OBs for standard stars, did you use the provided ISAAC*_*_cal_* templates? [NA] [FLAMES only] Did you specify the hour angle range for which your Target Setup files are valid ? [NA] [VIMOS only] Did you specify suitable guide stars for all your OBs using Guidecam? [NA] [VIMOS only] Did you check that the chosen guide stars are suitable for all the offset positions and that they do not produce unacceptable vignetting of the field of view? [NA] If you answered "NO" to any of these questions, please revise your OBs *before* submission.