README Template 72.1 (please do not delete the README Template Version line!) ESO Programme ID: 072.A-0067(A) Principal Investigator Name: Max Pettini Principal Investigator E-mail Address: pettini@ast.cam.ac.uk Principal Investigator Telephone Number: +44-1223-766670 Principal Investigator Postal Address: Institute of Astronomy, Madingley Road, Cambridge, CB3 0HA, UK Instrument: ISAAC OPC Priority Class: B OPC Approved Total Execution Time: 25.0 hours Estimated Total Execution Time (including overheads): 24 h 25 m README File Submission Date: 29 August 2003 Programme Description ===================== General Overview ---------------- Medium Resolution near-IR spectroscopy of high z QSOs. Two QSOs, two wavelength settings for each, 5 OBs for each setting. QSOs will not be visible at acquisition. Target coordinates are those of nearby reference stars. When acquired at the specified slit angles, QSOs will be on the slit too. In each case, the object marked `Target' on the Finding Chart is the nearby reference star. In acquisition OBs I have specified RA and Dec offsets to be applied after the reference star has been acquired in the centre of the slit. These offsets are to place the mid-position between reference star and QSO in the centre of the slit. After performing these (small) offsets, the reference star will still be visible on the slit. Please ensure that star is well centred across the slit after the offset, to minimise slit slosses. Thank you! Approved Waiver Request Summary ------------------------------- I have requested a waiver of the condition that the maximum execution time for each OB should be less than 1 hour. Waiver granted (MWI). Critical Observing Condition Constraints ---------------------------------------- N/A Time Critical Aspects --------------------- N/A Special Calibration Information ------------------------------- None. However, when you obtain the normal flux standard star calibrations, I'd be grateful if you could maximise the S/N of the standard star spectrum, by either choosing a standard at the bright end of the magnitude range, and/or giving it the maximum allowed the exposure time. ToO Information --------------- N/A Pre-Imaging Requirements ------------------------ N/A OB Information ============== List of Science OBs with Associated Finding Charts -------------------------------------------------- J1030+054_A1, through to J1030+054_A5 (5 OBs): 072.A-0067A.001.ps J1030+054_B1, through to J1030+054_B5 (5 OBs): 072.A-0067A.001.ps J1306+039_A1, through to J1306+039_A5 (5 OBs): 072.A-0067A.002.ps J1306+039_B1, through to J1306+039_B5 (5 OBs): 072.A-0067A.002.ps Total Number of Submitted Science OBs: 20 Total Number of Submitted Finding Charts: 2 List of Calibration OBs with Associated Science OBs --------------------------------------------------- Total Number of Submitted Calibration OBs: None Phase 2 package Compliance Checks ================================= (Y = Yes, N = No, NA = Not Applicable) Do all your OBs comply with the instrument specific requirements listed on the instrument specific Phase 2 Web pages ? [Y] Do all your Finding Charts comply with the both the general and instrument-specific finding chart requirements? [Y] If you submitted OBs for standard stars, did you specify the magnitude and spectral type of all standard stars ? [NA] Have you included OBs for any calibrations that you need but which are not a part of the Calibration Plan? [NA] [FORS only] Do all your FORS OBs use only the allowed detector read-out modes listed on the FORS1/FORS2 Phase 2 Web pages? [NA] [FORS only] Do all your FORS MOS/LSS OBs contain the mandatory "through-slit image" template? [NA] [UVES only] Do all your UVES OBs use only the allowed templates listed on the UVES Phase 2 Web pages ? [NA] [ISAAC only] Are ALL the objects in your field-of-view fainter than the magnitude limits specified on the ISAAC Phase 2 Web page ? [Y] [ISAAC only] If you submitted OBs for standard stars, did you use the provided ISAAC*_*_cal_* templates? [NA] [FLAMES only] Did you specify the hour angle range for which your Target Setup files are valid ? [NA] [VIMOS only] Did you specify suitable guide stars for all your OBs using Guidecam? [NA] [VIMOS only] Did you check that the chosen guide stars are suitable for all the offset positions and that they do not produce unacceptable vignetting of the field of view? [NA] If you answered "NO" to any of these questions, please revise your OBs *before* submission.