README Template 71.1 (please do not delete the README Template Version line!) ESO Programme ID: 071.A-9012(A) Principal Investigator Name: M. Odenkirchen Principal Investigator E-mail Address: odenk@mpia.de Principal Investigator Telephone Number: +49/6221/528263 Principal Investigator Postal Address: MPIA, Koenigstuhl 17, D-69117 Heidelberg Instrument: WFI OPC Priority Class: A OPC Approved Total Execution Time: 25 Estimated Total Execution Time (including overheads): 15 h README File Submission Date: July 16, 2003 Programme Description ===================== General Overview ---------------- The aim of the program is to obtain images of 14 fields in the region of the globular cluster Palomar 5 in the filters B/123 and Rc/162 with exposure times of 800 sec and 600 sec, respectively. The observations need to be done in eight sequences. Each sequence consists of 5 exposures in one filter, the first and the last exposure of the sequence are always on field #1 and field #2, respectively. The second, third and fourth exposure of each sequence are on other fields. The sequences are named S1R, S1B, ...., S4R, S4B, where "S" means "sequence" or "series", and "R" and "B" show the filter. The five OBs of each sequence are named S1R_1, S1R_2, ... S1R_5, and similarly for the other sequences. The order in which the OBs have to be carried out is from 1 through 5. This means: -In the first night take the sequence S1R, i.e. carry out the OBs S1R_1 ... S1R_5 in this order. -When this has been accomplished, then in the next night take sequences S1B, i.e., carry out OBs S1B_1 ... S1B_2 in this order. -In the following night take S2R, i.e. observe the OBs S2R_1 ... S2R_5. -In the follwoing nights, proceed in this manner with S2B, then S3R, S3B, then S4R and S4B. This strict scheme is needed because the observability of the fields is restricted to the beginning of the night and because we need to observe target fields and comparison fields (field #1 and field #2) in close connection. Otherwise we will not be able to achieve the desired photometric calibration by means of SDSS photometry in the comparison fields! (Note that this observing plan was outlined in the proposal.) Approved Waiver Request Summary ------------------------------- None Critical Observing Condition Constraints ---------------------------------------- In order to get sufficiently deep imaging within the given short time frame of observability of the fields the seeing should not be worse than 1.5". We need to avoid stray light and thus want the moon to be below the horizon during the first 2 hours of the night. Air mass should preferably be below 1.5, and clearly not higher than 1.8. Since the field will soon move to higher air mass, the observations need to start as soon as possible after the end of twilight. Due to rising air mass only one sequence of five fields in one filter can be observed per night. Time Critical Aspects --------------------- Since the fields are only observble during the first 2 hours of the night and since we need the moon to below the horizon, the observations need to start on August 15 and be continued in the first hours of the following nights. Only one series of five exposures can be done in one night. Special Calibration Information ------------------------------- We need the usual sets of bias exposures and sky flat field exposures in B/123 and Rc/162 for each night. We provide one (!) set of OBs for this purpose, they need to be repeated in every night. ToO Information --------------- None Pre-Imaging Requirements ------------------------ None OB Information ============== List of Science OBs with Associated Finding Charts -------------------------------------------------- Total Number of Submitted Science OBs: 40 Total Number of Submitted Finding Charts: 14 List of Calibration OBs with Associated Science OBs --------------------------------------------------- Total Number of Submitted Calibration OBs: 3 OB Compliance Checks ==================== (Y = Yes, N = No, NA = Not Applicable) Do all your OBs comply with the instrument specific requirements listed on the instrument specific Phase 2 Web pages ? Y [Y/N/NA] If you submitted OBs for standard stars, did you specify the magnitude and spectral type of all standard stars ? NA [Y/N/NA] Have you included OBs for any calibrations that you need but which are not a part of the Calibration Plan? Y [Y/N/NA] [FORS only] Do all your FORS OBs use only the allowed detector read-out modes listed on the FORS1/FORS2 Phase 2 Web pages? NA [Y/N/NA] [FORS only] Do all your FORS MOS/LSS OBs contain the mandatory "through-slit image" template? NA [Y/N/NA] [UVES only] Do all your UVES OBs use only the allowed templates listed on the UVES Phase 2 Web pages ? NA [Y/N/NA] [ISAAC only] Are ALL the objects in your field-of-view fainter than the magnitude limits specified on the ISAAC Phase 2 Web page ? NA [Y/N/NA] [ISAAC only] If you submitted OBs for standard stars, did you use the provided ISAAC*_*_cal_* templates? NA [Y/N/NA] [FLAMES only] Did you specify the hour angle range for which your Target Setup files are valid ? NA [Y/N/NA] [WFI only]Are your finding charts 34 arcmin x 34 arcmin? Y [Y/N/NA] If you answered "NO" to any of these questions, please revise your OBs *before* submission.