[ESO Web]
European Southern Observatory
New Technology Telescope
[NTT Web]

General :
Observations :
Operations :

Recovery Procedure

Procedure: SOFI Mask/Slit Wheel - Failure
Author: Leo Vanzi & V. Doublier
Release: 1.0/ June 22, 2002

Check Slit/Mask wheel status: if OFF then put StandBy, if ONLINE (spurious) then out it OFF then StandBy

- open ICS control panel (if not already up)

1- Use the handset tool

- on the ICS control panel: Tools -> handset tool - select speed ~ 500

- use < and > button to move the wheel and the STOP button to stop the wheel from moving

- Find the 0.6 arcsec slit position

2a - From the OS:

- click on the MORE... button and enable "draw RTD object"

- in an wsofi Xterm type: isosCmd long_slit_0.6

2b - with the handset tool

- change the speed to 20

- Align the slit and the drawing within 1 pixel over the entire detector

- Do a Fall Back Init

3 - From the OS control panel

- run SOFI_spec_tecAlignSlit template from BOB

- if mis-alignment is more than 1 pixel: accept changing encoder position, and repeat process

- When mis-alignment is better than 1 pixel, do not change encoder position

- ReDo the Fall Back Init

4 - Resume normal operations

Don't forget to report PB and SOFI LogMon error messages in Remedy!

 

[Top of Page]

Send comments to: NTT Webmasters <nttweb@www.ls.eso.org>
Last Update: MMM DD, YYYY (WHO)
[ESO][ESO][ESO][Search][Help][News]