European Southern Observatory New Technology Telescope

General :
Observations :
Operations :

NTT Fax Machine

FAX MACHINE - MITA (LCD-640)
 
Notes: (Gabriel Martin- July 14, 1998)
 
This document is intended to serve as a basic guide to operate the MITA LCD-640 fax machine.
The fax machine also may be used as a laser copier. Nevertheless is not recommended to overload this availability processing extents documents.

TRANSMISSION AND COPY. 

•  Press the RESET/EJECT key - The present communication or copying operations will stop and any un-entered data undergoing processing will be cleared and the fax will revert to the initial mode.
• Select transmission mode pressing MEMORY TX key.
• There are two transmission modes: Standard and memory transmission modes. In standard mode, the scanning of the document is alternated with the transmission of the data. In memory mode, documents are scanned and stored into memory first and then transmitted or copied.
• Select the document contrast, by pressing the selecting button among the 3 possible settings: DARK, NORMAL, and LIGHT.
• Select image quality, by pressing the selecting key among the 5 possible settings: NORMAL, FINE, SUPER FINE, HALF TONE/HIGH QUALITY, and HALF/TONE REGULAR.
• Insert the document with the text facing down, with a maximum of 30 pages.
• Dial the number - Dialling is performed according to any of the 4 following procedures: [1] Dialling directly from the numeric keys (*), [2] Dialling a number registered under abbreviated dialling. [3] Dialling a number registered under one touch key and, [4] Dialling with the radial function.
• Send the document pressing SEND.

RECEIVING.

•  Select the reception mode pressing the AUTO/MANU.RX key - There are 2 receiving modes: auto response and manual response.

• When a call comes in, the bell will ring and RECEIVE will appear on the message display.
• To cancel a reception in progress, press the RESET/EJECT key. The fax will revert to the initial mode.

• When a call comes in, the bell will ring.
• Pick up the telephone handset.
• Listen to the other end through the telephone handset to verify whether the call is coming from a fax or not. If you are connected to a facsimile, press SEND key. If the other part answers, you are connected to a telephone. Then at the end of the conversation, press the SEND key in order to receive the document.
• Hang up the handset when the fax starts receiving the document.

Send comments to: NTT Webmasters <nttweb@www.ls.eso.org> Last Update: MMM DD, YYYY (WHO)