*** MIDAS logfile (05SEPpl1.2) *** Sa, 01 Mar 2008   15:16:30   Page 1
 
 
*** MIDAS logfile (vers. 05SEPpl1.2) *** Sa, 01 Mar 2008   15:16:44   Page 2
 
     ==========================================================
     SUMMARY STANDARD TEST CCD#46 TAKEN ON 080301 IN normcd MODE
     ==========================================================
 
      BIAS
      ====
 
      5 biases at start test: average = 348.45 stddev =   1.96 
               FIERA temperature = 273.15 K                   
      There were 0 hot pixels/columns detected
 
 
      TRANSFER FUNCTION AND LINEARITY DATA
      ====================================
 
  Table : Std_normcd_46_080301 
 Sequence Exp_tim1  Med_cnt1  Med_cnt2  Variance  Frc_cnt1  Frc_cnt2  el_adu1  
 -------- --------- --------- --------- --------- --------- --------- ---------
        1      2.17    1589.4    1589.6     787.0      0.11      0.12      2.02
        2      4.34    3167.3    3168.2    1578.2     -0.19     -0.17      2.01
        3      8.67    6339.4    6338.7    3145.7     -0.08     -0.09      2.02
        4     13.00    9506.9    9506.2    4728.9     -0.10     -0.10      2.01
        5     19.51   14265.7   14265.5    7074.1     -0.06     -0.06      2.02
        6     26.01   19028.3   19028.6    9307.2     -0.01     -0.01      2.04
        7     32.51   23794.0   23794.7   11653.4      0.03      0.03      2.04
        8     43.34   31748.2   31746.7   15241.1      0.10      0.09      2.08
        9     54.17   39682.6   39683.6   18900.0      0.10      0.10      2.10
       10     65.01   47620.6   47620.6   22398.4      0.10      0.10      2.13
 -------- --------- --------- --------- --------- --------- --------- ---------
 
      Dynamic range explored: from 3376 to 101135 e-
      Average count rate measured: 732 ADU/sec.
 
      CONV. FACTOR AND RON
      ====================
 
      C.Fact =   2.12 +/-   0.02 e-/ADU
 
      RON    =   4.17 +/-   0.03 e- RMS
 
 
      SHUTTER ERROR
      =============
 
 Average shutter error derived from fractional count rate = -0.001 sec
 
 
      LINEARITY ERROR
      ===============
 
 Average linearity error after shutter correct. = + 0.11/-0.18 %
 
 These errors represent maximum deviation in % from the average
 count rate after correction for shutter delay