*** MIDAS logfile (05SEPpl1.2) *** Fr, 19 Oct 2007 13:56:11 Page 1 *** MIDAS logfile (vers. 05SEPpl1.2) *** Fr, 19 Oct 2007 13:56:25 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#46 TAKEN ON 071019 IN normcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 349.45 stddev = 1.98 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_normcd_46_071019 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 2.17 1600.4 1600.3 793.0 0.11 0.12 2.02 2 4.34 3187.3 3187.4 1601.2 -0.21 -0.20 1.99 3 8.67 6379.0 6378.4 3194.5 -0.07 -0.08 2.00 4 13.00 9565.7 9565.4 4686.2 -0.09 -0.09 2.04 5 19.51 14351.5 14352.1 7028.2 -0.06 -0.05 2.04 6 26.01 19142.7 19142.9 9407.8 -0.01 -0.01 2.03 7 32.51 23938.1 23938.4 11568.8 0.03 0.03 2.07 8 43.34 31935.5 31934.9 15174.7 0.09 0.09 2.10 9 54.17 39927.1 39925.8 19089.4 0.11 0.11 2.09 10 65.01 47896.6 47893.2 22227.4 0.08 0.08 2.15 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3427 to 102569 e- Average count rate measured: 736 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.14 +/- 0.02 e-/ADU RON = 4.24 +/- 0.04 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.001 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.12/-0.21 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay